刷DD-WRT方法，已经解决！谢谢

ks***

如题~
本人昨天晚上折腾了5~6个小时，方法没找到！倒是挂掉了3台，
我昨天晚上是原版刷----openWRT成功 然后在OPENWRT刷DD-WRT的过程中始终不成功!按照下面的N种方法测试过的！

对了 flash 是2M的 准备刷DD-WRT的微型版

昨天下的OPENWRT 不带WEB界面的！具体又下了个带WEB界面的！进WEB界面刷即可


1. Via OpenWrt webif GUI:
Goto System / Upgrade (Firmware Upgrade)

Download the DD-WRT dd-wrt.v24_std_generic.bin image to your PC.

Upload the dd-wrt.v24_std_generic.bin image and click on the Upgrade button

Wait 2 minutes. The router will reboot itself automatically after the upgrade is complete.

Do a hard reset and clear your browsers cache

You are done! Access the router via DD-WRT web GUI at http://192.168.1.1/ (username: root/password: admin)

[ 本帖最后由 ks99 于 2008-8-6 14:19 编辑 ]

gho***

直接下载http://www.dd-wrt.com/dd-wrtv2/d ... 9517_VINT_micro.bin

在openwrt上用web刷，如果没有WEB，请用mtd -e linux -r write ***.bin linux 刷，固件上传可以使用本台架设一台FTP，在openwrt中用wget 下载到内存里，然后刷

你2M的闪存，刷STD的当然要挂了。

[ 本帖最后由 ghostja 于 2008-8-6 12:37 编辑 ]

gho***

2M的版本是V2的，应该是12V电源那种。还有，刷好后，最好reset一下，按住30秒吧。保险起见

[ 本帖最后由 ghostja 于 2008-8-6 12:43 编辑 ]

ks***

终于自己搞定 哈哈哈！
1. Via OpenWrt webif GUI:
Goto System / Upgrade (Firmware Upgrade)

Download the DD-WRT dd-wrt.v24_std_generic.bin image to your PC.

Upload the dd-wrt.v24_std_generic.bin image and click on the Upgrade button

Wait 2 minutes. The router will reboot itself automatically after the upgrade is complete.

Do a hard reset and clear your browsers cache

You are done! Access the router via DD-WRT web GUI at http://192.168.1.1/ (username: root/password: admin)

gho***

这个就是openwrt WEB刷嘛。哈，搞定就好。

其实刷就是要挑对版本

gho***

其实可以在原版固件上直接刷
http://www.dd-wrt.com/dd-wrtv2/d ... 24_micro_we800g.bin

这个固件