[2018-12-08] mt7628_8+64 padavan

醉***

源码来源：https://github.com/hanwckf/rt-n56u
是一位网友有这个需求，H大的padavan 7628的好像就一个mi-nano，但那个需要16Mflash
因此修改了我的路由配置，编译了一个，编译了几遍，因为不懂linux结构没法缩减，只能去除一些功能，才缩减到7770404

链接: https://pan.baidu.com/s/1Wcb8xas4a-KgLczDeG9gVA 密码: dkpa
在文件夹7628_8+64里面，最好有breed的才尝试
配置文件也在这个文件夹里

带usb，没有5G
reset：38
wan led、lan led、wifi led、usb led 都没有适配，随便填的
后台地址：192.168.7.1
账号密码：都是admin
wifi名：ASUS
wifi密码：1234567890

1. ### Target Vendor/Product (support only Ralink RT3883/MT7620/MT7621/MT7628)
   
2. CONFIG_VENDOR=Ralink
   
3. CONFIG_PRODUCT=MT7628
   
4. 
   
5. ### Target ProductID (board select, max 12 symbols)
   
6. CONFIG_FIRMWARE_PRODUCT_ID="JCG-3R"
   
7. 
   
8. ### Linux kernel and toolchain
   
9. CONFIG_LINUXDIR=linux-3.4.x
   
10. CONFIG_TOOLCHAIN_DIR=/opt/rt-n56u/toolchain-mipsel
    
11. 
    
12. ############################################################
    
13. ### Linux kernel configuration
    
14. ############################################################
    
15. 
    
16. ### Enable MT7628 CPU sleep mode (downclock to 100MHz on idle)
    
17. #CONFIG_FIRMWARE_CPU_SLEEP=y
    
18. 
    
19. ### 4.1 = MT7628 v4.1.0.0
    
20. CONFIG_FIRMWARE_WIFI2_DRIVER=4.1
    
21. 
    
22. ### Enable IPv6 support
    
23. CONFIG_FIRMWARE_ENABLE_IPV6=y
    
24. 
    
25. ### Enable USB support
    
26. CONFIG_FIRMWARE_ENABLE_USB=y
    
27. 
    
28. ### Enable NTFS filesystem support via Paragon "ufsd" driver. ~0.4MB
    
29. CONFIG_FIRMWARE_ENABLE_UFSD=y
    
30. 
    
31. ### Enable FAT/FAT32 filesystem support. ~0.1MB
    
32. CONFIG_FIRMWARE_ENABLE_FAT=y
    
33. 
    
34. ### Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB
    
35. CONFIG_FIRMWARE_ENABLE_EXFAT=y
    
36. 
    
37. ### Enable EXT2 filesystem support. ~0.1MB
    
38. CONFIG_FIRMWARE_ENABLE_EXT2=y
    
39. 
    
40. ### Enable EXT3 filesystem support. ~0.2MB
    
41. CONFIG_FIRMWARE_ENABLE_EXT3=y
    
42. 
    
43. ### Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB
    
44. CONFIG_FIRMWARE_ENABLE_EXT4=y
    
45. 
    
46. ### Enable XFS filesystem support. ~0.6MB
    
47. CONFIG_FIRMWARE_ENABLE_XFS=n
    
48. 
    
49. ### Enable FUSE (filesystems in userspace) support. ~0.1MB
    
50. CONFIG_FIRMWARE_ENABLE_FUSE=y
    
51. 
    
52. ### Enable swap files/partitions support. ~0.05MB
    
53. CONFIG_FIRMWARE_ENABLE_SWAP=y
    
54. 
    
55. ### Include UVC camera modules. ~0.2MB
    
56. CONFIG_FIRMWARE_INCLUDE_UVC=y
    
57. 
    
58. ### Include USB-HID modules. ~0.2MB
    
59. CONFIG_FIRMWARE_INCLUDE_HID=y
    
60. 
    
61. ### Include USB-Serial modules (e.g. pl2303). ~0.03MB
    
62. CONFIG_FIRMWARE_INCLUDE_SERIAL=y
    
63. 
    
64. ### Include USB-Audio modules ~0.46MB
    
65. CONFIG_FIRMWARE_INCLUDE_AUDIO=n
    
66. 
    
67. ### Include network QoS scheduling modules. ~0.2MB
    
68. CONFIG_FIRMWARE_INCLUDE_QOS=y
    
69. 
    
70. ### Include IMQ module for shapers (a bit of performance degradation). ~0.02MB
    
71. CONFIG_FIRMWARE_INCLUDE_IMQ=y
    
72. 
    
73. ### Include IFB module for shapers. ~0.03MB
    
74. CONFIG_FIRMWARE_INCLUDE_IFB=y
    
75. 
    
76. ### Include IPSet utility and kernel modules. ~0.4MB
    
77. CONFIG_FIRMWARE_INCLUDE_IPSET=y
    
78. 
    
79. ### Include NFSv3 server. ~0.6MB
    
80. CONFIG_FIRMWARE_INCLUDE_NFSD=n
    
81. 
    
82. ### Include NFSv3 client. ~0.5MB
    
83. CONFIG_FIRMWARE_INCLUDE_NFSC=n
    
84. 
    
85. ### Include CIFS (SMB) client. ~0.2MB
    
86. CONFIG_FIRMWARE_INCLUDE_CIFS=y
    
87. 
    
88. ############################################################
    
89. ### Userspace configuration
    
90. ############################################################
    
91. 
    
92. ### Include WebUI international resources. Increased firmware size
    
93. CONFIG_FIRMWARE_INCLUDE_LANG_CN=y
    
94. #CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
    
95. #CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
    
96. #CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
    
97. #CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
    
98. #CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
    
99. #CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
    
100. #CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
     
101. #CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
     
102. #CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
     
103. #CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
     
104. #CONFIG_FIRMWARE_INCLUDE_LANG_SV=y
     
105. #CONFIG_FIRMWARE_INCLUDE_LANG_UK=y
     
106. 
     
107. ### Include NTFS-3G FUSE driver (instead of Paragon "ufsd"). ~0.4MB
     
108. CONFIG_FIRMWARE_INCLUDE_NTFS_3G=y
     
109. 
     
110. ### Include LPR printer daemon. ~0.12MB
     
111. CONFIG_FIRMWARE_INCLUDE_LPRD=y
     
112. 
     
113. ### Include USB-over-Ethernet printer daemon. ~0.05MB
     
114. CONFIG_FIRMWARE_INCLUDE_U2EC=y
     
115. 
     
116. ### Include "tcpdump" utility. ~0.6MB
     
117. CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y
     
118. 
     
119. ### Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB
     
120. CONFIG_FIRMWARE_INCLUDE_HDPARM=y
     
121. 
     
122. ### Include "parted" utility (allow make GPT partitions). ~0.3MB
     
123. CONFIG_FIRMWARE_INCLUDE_PARTED=y
     
124. 
     
125. ### Include SMB (and WINS) server. ~1.5MB
     
126. CONFIG_FIRMWARE_INCLUDE_SMBD=y
     
127. 
     
128. ### using samba3.6 instead of samba3
     
129. CONFIG_FIRMWARE_INCLUDE_SMBD36=y
     
130. 
     
131. ### Include WINS server only. ~0.4MB
     
132. CONFIG_FIRMWARE_INCLUDE_WINS=y
     
133. 
     
134. ### Include syslog for SMB and WINS server. ~0.3MB
     
135. CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=n
     
136. 
     
137. ### Include FTP server. ~0.2MB
     
138. CONFIG_FIRMWARE_INCLUDE_FTPD=y
     
139. 
     
140. ### Include alternative L2TP control client RP-L2TP. ~0.1MB
     
141. CONFIG_FIRMWARE_INCLUDE_RPL2TP=y
     
142. 
     
143. ### Include EAP-TTLS and EAP-PEAP authentication support. openssl ~1.2MB, wpa_supplicant +0.04MB
     
144. CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y
     
145. 
     
146. ### Include HTTPS support for DDNS client. openssl ~1.2MB
     
147. CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y
     
148. 
     
149. ### Include HTTPS support. openssl ~1.2MB
     
150. CONFIG_FIRMWARE_INCLUDE_HTTPS=y
     
151. 
     
152. ### Include sftp-server. openssl ~1.2MB, sftp-server ~0.06MB
     
153. CONFIG_FIRMWARE_INCLUDE_SFTP=y
     
154. 
     
155. ### Include dropbear SSH. ~0.3MB
     
156. CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y
     
157. 
     
158. ### Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB
     
159. CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y
     
160. 
     
161. ### Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB
     
162. CONFIG_FIRMWARE_INCLUDE_OPENSSH=y
     
163. 
     
164. ### Include Openvirtual**. IPv6 required. openssl ~1.2MB, openvirtual** ~0.4MB
     
165. CONFIG_FIRMWARE_INCLUDE_OPENvirtual**=n
     
166. 
     
167. ### Include Elliptic Curves (EC) to openssl library. ~0.1MB
     
168. CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=n
     
169. 
     
170. ### Include "openssl" executable for generate certificates. ~0.4MB
     
171. CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n
     
172. 
     
173. ### Include xUPNPd IPTV mediaserver. ~0.3MB
     
174. CONFIG_FIRMWARE_INCLUDE_XUPNPD=n
     
175. 
     
176. ### Include Minidlna UPnP mediaserver. ~1.6MB
     
177. CONFIG_FIRMWARE_INCLUDE_MINIDLNA=n
     
178. 
     
179. ### Include Firefly iTunes mediaserver. ~1.0MB
     
180. CONFIG_FIRMWARE_INCLUDE_FIREFLY=n
     
181. 
     
182. ### Include ffmpeg 0.11.x instead of 0.6.x for Minidlna and Firefly. ~0.1MB
     
183. CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=n
     
184. 
     
185. ### Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB
     
186. CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=n
     
187. 
     
188. ### Include Transmission-Web-Control (advanced WebUI). ~0.8MB
     
189. CONFIG_FIRMWARE_INCLUDE_TRANSMISSION_WEB_CONTROL=n
     
190. 
     
191. ### Include Aria2 download manager. openssl ~1.2MB, aria2 ~3.5MB
     
192. CONFIG_FIRMWARE_INCLUDE_ARIA=n
     
193. 
     
194. ### Include Aria2 new version instead of old version (prebuild by gcc 4.9.4)
     
195. CONFIG_FIRMWARE_INCLUDE_ARIA2_NEW_PREBUILD_BIN=n
     
196. 
     
197. ### Include Aria2 WEB control. ~0.7MB
     
198. CONFIG_FIRMWARE_INCLUDE_ARIA_WEB_CONTROL=n
     
199. 
     
200. CONFIG_APPLY_PROMETHEUS_WIFI_DRIVER_PATCH=n
     
201. 
     
202. CONFIG_FIRMWARE_INCLUDE_CURL=n
     
203. 
     
204. CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n
     
205. 
     
206. CONFIG_FIRMWARE_INCLUDE_GDUT_DRCOM=n
     
207. 
     
208. CONFIG_FIRMWARE_INCLUDE_DOGCOM=n
     
209. 
     
210. CONFIG_FIRMWARE_INCLUDE_MINIEAP=n
     
211. 
     
212. CONFIG_FIRMWARE_INCLUDE_NJIT_CLIENT=n
     
213. 
     
214. CONFIG_FIRMWARE_INCLUDE_NAPT66=y
     
215. 
     
216. CONFIG_FIRMWARE_INCLUDE_s-s=y
     
217. 
     
218. CONFIG_FIRMWARE_INCLUDE_SSSERVER=y
     
219. 
     
220. CONFIG_FIRMWARE_INCLUDE_SOFTETHERvirtual**_CLIENT=n
     
221. 
     
222. CONFIG_FIRMWARE_INCLUDE_SOFTETHERvirtual**_CMD=n
     
223. 
     
224. CONFIG_FIRMWARE_INCLUDE_DNSMASQ_CHINA_CONF=n
     
225. 
     
226. CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n
     
227. 
     
228. CONFIG_FIRMWARE_INCLUDE_china-dns=n
     
229. 
     
230. CONFIG_FIRMWARE_INCLUDE_VLMCSD=n
     
231. 
     
232. CONFIG_FIRMWARE_INCLUDE_TTYD=y
     
233. 
     
234. CONFIG_FIRMWARE_INCLUDE_LRZSZ=n
     
235. 
     
236. CONFIG_FIRMWARE_INCLUDE_HTOP=n
     
237. 
     
238. CONFIG_FIRMWARE_INCLUDE_NANO=n
     
239. 
     
240. CONFIG_FIRMWARE_INCLUDE_IPERF=n
     
241. 
     
242. CONFIG_FIRMWARE_INCLUDE_IPERF3=n
     
243. 
     
244. CONFIG_FIRMWARE_INCLUDE_DUMP1090=n
     
245. 
     
246. CONFIG_FIRMWARE_INCLUDE_RTL_SDR=n
     
247. 
     
248. CONFIG_FIRMWARE_INCLUDE_MTR=n

复制代码

li***

暂时没有这个路由。。。。

litt***

是不是叫美的路由器MSRR-R00

醉***

littrell 发表于 2018-12-9 00:49
是不是叫美的路由器MSRR-R00

不是，叫智能路'游'器   

黑黑白***

醉老仙 发表于 2018-12-9 10:03
不是，叫智能路'游'器

手上刚好有个美的的配置跟这个一样

醉***

黑黑白白小白白 发表于 2018-12-10 19:03
手上刚好有个美的的配置跟这个一样

这个固件好像有点问题，有breed可以尝试一下，那位网友说刷完无法启动，但是用4+32的那个可以，我没有这个配置的路由，没法测试，没有breed切勿尝试

sma***

蒲公英的X1也是这个配置的，但是闪存是16M的。用原厂固件很好用，不用第三方的固件了。

黑黑白***

醉老仙 发表于 2018-12-10 20:07
这个固件好像有点问题，有breed可以尝试一下，那位网友说刷完无法启动，但是用4+32的那个可以，我没有这 ...

8M+64M不能启动

a4293***

希望能把8M+60m的固件做出来。。。。4m固件虽然能启动但是太浪费了内存了。。功能也太少了。而且这个还是支持石头123 的app哦

mxf***

谢谢版主 找了好久 一次刷机成功