|
|
XWRT-Vortex / Asuswrt-Merlin
============================
About
-----
Asuswrt is the name of the firmware Asus has developed for
their various router models. Originally forked from Tomato,
it has since grown into a very different product, removing
some more technical features that were part of Tomato, but
also adding a lot of new original features.
Asuswrt-merlin is a customized version of Asus's firmware. The goal is
to provide bugfixes and minor enhancements to Asus's firmware, with also
a few occasional feature additions. This is done while retaining
the look and feel of the original firmware, and also ensuring that
the two codebases remain close enough so it will remain possible
to keep up with any new features brought by Asus in the original firmware.
XWRT-Vortex is a Asuswrt-merlin fork intended to support some Non-Asus
routers.
This project's goal is NOT to develop yet another firmware filled with
many features that are rarely used by home users - that is already covered
by other excellent projects such as Tomato or DD-WRT.
This more conservative approach will also help ensuring the highest
level of stability possible. Priority is given to stability over
performance, and performance over features.
Asuswrt-Merlin Supported Devices
--------------------------------
Fully supported devices:
* RT-AC66U_B1 (use the RT-AC68U firmware)
* RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)
* RT-AC68U V3 (use the RT-AC68U firmware)
* RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)
* RT-AC88U
* RT-AC3100
* RT-AC5300
* RT-AC86U
* RT-AC2900 (use the RT-AC86U firmware)
* RT-AX88U
* RT-AX56U
* RT-AX58U & RT-AX3000
* RT-AX86U & RT-AX86S
* GT-AC2900
* GT-AX11000
* RT-AX68U
XWRT-Vortex Supported Devices
-----------------------------
* Netgear R7000
* Linksys EA6900
No longer supported:
* RT-N16
* RT-N66U
* RT-AC66U
* RT-AC56U
* RT-AC87U
* RT-AC3200
NOTE: all the "R" versions (for example RT-N66R) are the same as their
"U" counterparts, they are just different packages aimed at large
retailers. The firmware is 100% compatible with both U and R versions
of the routers. Same with the "W" variants that are simply white.
Features
--------
Here is a list of features that Asuswrt-merlin adds over the original
firmware.
(Note: HND platform = newer Broadcom models starting with RT-AC86U):
System:
- Various bugfixes and optimizations
- Some components were updated to newer versions, for improved
stability and security
- User scripts that run on specific events
- Cron jobs
- Ability to customize the config files used by the router services
- Ability to turn off router LEDs
- Entware easy setup script (alternative to Optware - the two are
mutually exclusive)
- SNMP support (except for HND devices)
- Nano text editor (for more user-friendly script editing)
- NTP daemon, which can synchronize your client devices
Disk sharing:
- Enable/disable the use of shorter share names
- NFS sharing (through webui)
- Allow or disable WAN access to the FTP server
- TLS support for the FTP server
Networking:
- Force acting as a Master Browser
- Act as a WINS server
- SSHD support for key-based authentication
- Allows tweaking TCP/UDP connection tracking timeouts
- CIFS client support (for mounting remote SMB share on the router)
- User-defined options for WAN DHCP queries (required by some ISPs)
- Advanced Openvirtual** client and server support
- Support for new Openvirtual** 2.4 features like NCP and LZ4
- Netfilter ipset module, for efficient blacklist implementation
- Configurable min/max UPNP ports
- DNS-based Filtering, can be applied globally or per client
- Custom DDNS (through user script or custom config file)
- TOR support, individual client control (based on experimental code
from Asus)
- Policy routing for the Openvirtual** client (based on source or
destination IPs), sometimes referred to as "selective routing")
- DNSSEC support
- fq_codel queue discipline for Traditional QoS
- Full cone NAT support (HND devices only)
- Detailed wireless troubleshooting information (HND devices
only)
- Modern DDNS client (In-a-Dyn), with HTTPS support
- DNS-over-TLS
- Redirect NTP client queries to the router's own NTP daemon
- WS-Discovery support (alternative to SMBv1 network discovery)
- Cake QoS (HND devices only)
Web interface:
- Performance improvements
- Optionally save traffic stats to disk (USB or JFFS partition)
- Enhanced traffic monitoring with graphical reports of
historical data
- Traffic report per IP (except on HND devices)
- Hostname field on the DHCP reservation page
- System information summary page
- Wifi icon reports the state of all radios
- Wireless site survey
- Advanced Wireless client list display, including automated refresh
- Redesigned layout of the various System Log sections
- Editable fields for some pages
- Advanced traffic classification report
Note that a number of features which first appeared in Asuswrt-Merlin
have since been integrated/implemented in the official firmware, such
as Openvirtual** support.
Installation
------------
Simply flash it like any regular update. You should not need to
reset to factory defaults (see note below for exceptions).
You can revert back to an original Asus firmware at any time just
by flashing a firmware downloaded from Asus's website.
If the firmware upgrade fails, try rebooting your router to free
up sufficient memory, without any USB disk plugged in,
then try flashing it again.
NOTE: resetting to factory default after flashing is
strongly recommended for the following cases:
- Updating from a firmware version that is more than 3 releases older
- Switching from a Tomato/DD-WRT/OpenWRT firmware
If you run into any issue after an upgrade and you haven't done so,
try doing a factory default reset as well.
Always read the changelog, as mandatory resets will be mentionned
there when they are necessary.
In all of these cases, do NOT load a saved copy of your settings!
This would be the same thing as NOT resetting at all, as you will
simply re-enter any invalid setting you wanted to get rid of. Make
sure to create a new backup of your settings after reconfiguring.
Documentation
-------------
For documentation on how to use the features that are specific to
Asuswrt-Merlin, as well as additional guides, please consult the
wiki:
https://github.com/RMerl/asuswrt-merlin.ng/wiki
There are also support forums hosted at SNBForums.
Firmware support: https://www.snbforums.com/forums/asuswrt-merlin.42/
AddOns support: https://www.snbforums.com/forums/asuswrt-merlin-addons.60/
Source code
-----------
The source code can be found on Github:
https://github.com/RMerl/asuswrt-merlin.ng
Original pre-382.xx legacy code (now archived):
https://github.com/RMerl/asuswrt-merlin
Contact information
-------------------
SmallNetBuilder forums (preferred method: http://www.snbforums.com/forums/asuswrt-merlin.42/ as RMerlin)
Website: https://www.asuswrt-merlin.net/
Github: https://github.com/RMerl
Email: merlin@asuswrt-merlin.net
Twitter: https://twitter.com/RMerlinDev
IRC: #asuswrt on Libera
Download: https://www.asuswrt-merlin.net/download
Development news will be posted on Twitter and the support forums.
You can also keep a closer eye on development as it happens, through
the Github code repository.
For support questions, please use the SmallNetBuilder forums whenever
possible. There's a dedicated Asuswrt-Merlin sub-forum there, under
the Asus Wireless section. The community there is the primary source
of technical support.
I want to give my special thanks to Asus for showing an interest in
this project, and also providing me with support and development
devices when needed. I also want to thank everyone that has
donated through Paypal. Much appreciated!
Finally, my special thanks to r00t4rd3d for designing the
Asuswrt-Merlin logo.
Disclaimer
----------
This is the part where you usually put a lot of legalese stuff that nobody
reads. I'm not a lawyer, so I'll just make it simple, using my own words
rather than some pre-crafted text that will bore you to death and that
nobody but a highly paid lawyer would even understand anyway:
I take no responsibility for issues caused by this project. I do my best to
ensure that everything works fine. If something goes wrong, my apologies.
The Asuswrt-merlin firmware is released under a GPL licence. In short, you
are free to use, redistribute and modify it, as long as all the associated
licences are respected, and that any changes you make to the GPL code is
made publicly available.
Copyrights belong to the appropriate individuals/entities, under the appropriate
licences. GPL code is covered by GPL, proprietary code is Copyright their
respective owners, yadda yadda.
I try my best to honor the licences (as far as I can understand them, as a
normal human being). Anything GPL or otherwise open-sourced that I modify
will see my changes published to Github at some point. A release might get
delayed if I'm working using pre-release code. If it's GPL, it will eventually
be published - no need to send a volley of legal threats at me.
In any other cases not covered, Common Sense prevails, and I shall also make use
of Good Will.
Concerning privacy:
The only call back made by this firmware to me is when it checks for the
availability of a new version. The automated check can be disabled if desired.
More info on the Wiki:
https://github.com/RMerl/asuswrt ... /Privacy-disclosure
---
Eric Sauvageau
|
|
/1 
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡