求助，新人R7000 TTL无法进入CFE

hsj19***

各位大佬救救，本人不是计算机专业的，在爬贴自学自救，用到TTL线已经是极限了，下边的错误信息也看不懂，如有大佬有空，请帮帮我，谢谢
信息如下

Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S300001C3
000011C0


RDLYW0 00000004

RDENW0 00000032

RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ---------++++++++++++++++++++++X+++++++++++++++++++++-----------
01 -------------+++++++++++++++++++++X++++++++++++++++++++---------
02 ---------+++++++++++++++++++++X+++++++++++++++++++++------------
03 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
04 -----+++++++++++++++++++++X+++++++++++++++++++++----------------
05 ----------++++++++++++++++++++++X+++++++++++++++++++++----------
06 -------++++++++++++++++++++X++++++++++++++++++++----------------
07 -------------+++++++++++++++++++++X++++++++++++++++++++---------
08 ---------++++++++++++++++++++X+++++++++++++++++++---------------
09 -------------+++++++++++++++++++++X+++++++++++++++++++++--------
10 --------+++++++++++++++++++++X++++++++++++++++++++--------------
11 -------------++++++++++++++++++++X++++++++++++++++++++----------
12 -------++++++++++++++++++++X++++++++++++++++++++----------------
13 --------------++++++++++++++++++++X+++++++++++++++++++----------
14 -----------++++++++++++++++++++X++++++++++++++++++++------------
15 -------------+++++++++++++++++++++X+++++++++++++++++++++--------


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
01 --++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
02 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
03 +++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
04 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
05 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
06 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
07 -+++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
08 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
09 -+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
10 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
11 -++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
12 ++++++++++++++++++++++++X+++++++++++++++++++++++----------------
13 --++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
14 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
15 --+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ---------++++++++++++++++++++++X++++++++++++++++++++++----------
01 -------------+++++++++++++++++++++X+++++++++++++++++++++--------
02 ---------++++++++++++++++++++++X+++++++++++++++++++++-----------
03 -------+++++++++++++++++++++X+++++++++++++++++++++--------------
04 -----+++++++++++++++++++++X+++++++++++++++++++++----------------
05 ----------++++++++++++++++++++++X+++++++++++++++++++++----------
06 -------++++++++++++++++++++X++++++++++++++++++++----------------
07 ------------++++++++++++++++++++++X+++++++++++++++++++++--------
08 ---------++++++++++++++++++++X++++++++++++++++++++--------------
09 ------------++++++++++++++++++++++X+++++++++++++++++++++--------
10 --------+++++++++++++++++++++X++++++++++++++++++++--------------
11 -------------++++++++++++++++++++X++++++++++++++++++++----------
12 --------++++++++++++++++++++X++++++++++++++++++++---------------
13 --------------++++++++++++++++++++X++++++++++++++++++++---------
14 -----------+++++++++++++++++++++X++++++++++++++++++++-----------
15 -------------++++++++++++++++++++++X+++++++++++++++++++++-------


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++X+++++++++++++++++++++--------++++++++++++-
01 +++++++++++++++++++++++X++++++++++++++++++++++--------+++++++++-
02 ++++++++++++++++++++++X++++++++++++++++++++++------++++++++++++-
03 +++++++++++++++++++++X+++++++++++++++++++++--------++++++++++++-
04 ++++++++++++++++++++X++++++++++++++++++++----------++++++++++++-
05 ++++++++++++++++++++++X++++++++++++++++++++++-----+++++++++++++-
06 +++++++++++++++++++++X++++++++++++++++++++---------++++++++++++-
07 +++++++++++++++++++++++X++++++++++++++++++++++-------++++++++++-
08 +++++++++++++++++++++X+++++++++++++++++++++---------+++++++++++-
09 -++++++++++++++++++++++X++++++++++++++++++++++----------+++++++-
10 ++++++++++++++++++++++X++++++++++++++++++++++--------++++++++++-
11 --++++++++++++++++++++++X+++++++++++++++++++++------------+++++-
12 ++++++++++++++++++++++X++++++++++++++++++++++-----+++++++++++++-
13 -+++++++++++++++++++++++X++++++++++++++++++++++----------++++++-
14 +++++++++++++++++++++++X++++++++++++++++++++++--------+++++++++-
15 ---+++++++++++++++++++++X+++++++++++++++++++++------------+++++-


WRDMW0 00000021
WRDMW0 00000022


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++S+++++++++++++X++++++++++++++++++++++++++++++++

Decompressing...done
Detect CPU turbo button...

CFE version 6.37.14.126 (r561982) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Sat Jun 22 23:49:18 MSK 2019 (Vortex)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.126 (r561982)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x01796420 (9004064)
Data:       0x00F4EA50 - 0x00F4EF48 (1272)
BSS:        0x00F4EF58 - 0x00F94420 (283848)
Heap:       0x00F94420 - 0x01794420 (8388608)
Stack:      0x01794420 - 0x01796420 (8192)
Text:       0x00F00000 - 0x00F45150 (282960)

Device eth0:  hwaddr 00-90-4C-0F-F2-A7, ipaddr 192.168.1.2, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
boot the image...
Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: .... 4035232 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000
nflash: squash filesystem with lzma found at block 28
Creating 4 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000004000000 : "linux"
0x00000039dd48-0x000004000000 : "rootfs"
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
p p t p driver version 0.8.5
Mirror/redirect action on
u32 classifier
    Performance counters on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3992 buckets, 15968 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Registering the dns_resolver key type
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 56, ecc bytes located at:
2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Options: NO_AUTOINCR,NO_READRDY,
Creating 2 MTD partitions on "brcmnand":
0x000004000000-0x000007ec0000 : "brcmnand"
0x000007ec0000-0x000008000000 : "asus"
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing init memory: 212K
init_main start

1: set_action 0


Hit ENTER for console...

firmware version: 386.5_0, dev/00:90:4C:0F:F2:A7)
wan_proto:dhcp not support FA mode...
[1 preinit:init_nvram +7] init_nvram for model(50)
set_dpsr_ifnames, mode:0
1: check_action 0: 1(preinit)
start_jffs2: getting the information of jffs2
start jffs2: 4, 65798144
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
start_jffs2: mounting jffs2
Empty flash at 0x01769440 ends at 0x01769800
Empty flash at 0x022a1e60 ends at 0x022a2000
Empty flash at 0x022ae7fc ends at 0x022ae800
Empty flash at 0x022bc200 ends at 0x022bc800
jffs2_scan_inode_node(): CRC failed on node at 0x02dc47c4: Read 0xffffffff, calculated 0xecc179b9
JFFS2 notice: (114) check_node_data: wrong data CRC in data node at 0x022bba88: read 0xdcc09391, calculated 0x2261219a.
JFFS2 notice: (46) check_node_data: wrong data CRC in data node at 0x022ad824: read 0x29bce37f, calculated 0xd7f25cf3.
<rc_service> [i:service] 142:notify_rc start_skipd/jffs/.asusrouter killdon: errno: 4 pid 111
1: check_action 0: 1(preinit)
start_jffs2: create jffs2 successfully
set_dpsr_ifnames, mode:0
sh: /usr/sbin/envrams: not found
sh: /usr/sbin/envram: not found

FA off.
ctf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x1
et_module_init: et_txq_thresh set to 0xce4
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.126 (r561982)
et_probe: mvlan vid[0]: 0
et_probe: mvlan vid[1]: 0

et_probe: mvlan en 0
hotplug net INTERFACE=eth0 ACTION=add SEQNUM=266
set_wltxpower(0x0261): unit: 0, txpower: 100
set_wltxpower(0x0261): unit: 1, txpower: 100
dpsta_init: Jun 12 2019 23:31:45 msglevel 0x1
hotplug net INTERFACE=dpsta ACTION=add SEQNUM=270
wl_module_init: passivemode set to 0x0
wl_module_init: igs set to 0x0
wl_module_init: txworkq set to 0x1
wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
wl1: wlc_ap_attach dynamic_ed_thresh_enable = 03

eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth2 ACTION=add SEQNUM=275
_ifconfig: name=eth0 flags=1043 IFUP addr= netmask=
et0: et_mvlan_netdev_event: event 16 for vlan1 mvlan_en 0
et0: et_mvlan_netdev_event: event 5 for vlan1 mvlan_en 0
hotplug net INTERFACE=vlan1 ACTION=add SEQNUM=284
et0: et_mvlan_netdev_event: event 16 for vlan2 mvlan_en 0
et0: et_mvlan_netdev_event: event 5 for vlan2 mvlan_en 0
hotplug net INTERFACE=vlan2 ACTION=add SEQNUM=286
update_lan_state(lan_, 0, 0)
generate_wl_para(0x11a1): unit 0 subunit -1
generate_wl_para(0x1656): bw: 0
generate_wl_para(0x1658): chanspec: 0
generate_wl_para(0x1659): bw_cap: 3
generate_wl_para(0x165f): obss_coex: 1
wlconf_pre(0x1e58): set vhtmode 1
generate_wl_para(0x11a1): unit 1 subunit -1
generate_wl_para(0x1656): bw: 0
generate_wl_para(0x1658): chanspec: 0
generate_wl_para(0x1659): bw_cap: 7
generate_wl_para(0x165f): obss_coex: 0
wlconf_pre(0x1e58): set vhtmode 1
vlan1:et0: et_mvlan_netdev_event: event 13 for vlan1 mvlan_en 0
cmd=1et0: et_mvlan_netdev_event: event 1 for vlan1 mvlan_en 0
4 (errno 95): Operation not supported
_ifconfig: name=vlan1 flags=1243 IFUP addr= netmask=
_ifconfig: name=eth1 flags=1243 IFUP addr= netmask=
hotplug net INTERFACE=br0 ACTION=add SEQNUM=288
generate_wl_para(0x11a1): unit 0 subunit -1
generate_wl_para(0x1656): bw: 0
generate_wl_para(0x1658): chanspec: 0
generate_wl_para(0x1659): bw_cap: 3
generate_wl_para(0x165f): obss_coex: 1
generate_wl_para(0x11a1): unit 0 subunit 1
generate_wl_para(0x11a1): unit 0 subunit 2
generate_wl_para(0x11a1): unit 0 subunit 3
generate_wl_para(0x11a1): unit 0 subunit 4

_ifconfig: name=eth2 flags=1243 IFUP addr= netmask=
generate_wl_para(0x11a1): unit 1 subunit -1
generate_wl_para(0x1656): bw: 0
generate_wl_para(0x1658): chanspec: 0
generate_wl_para(0x1659): bw_cap: 7
generate_wl_para(0x165f): obss_coex: 0
generate_wl_para(0x11a1): unit 1 subunit 1
generate_wl_para(0x11a1): unit 1 subunit 2
generate_wl_para(0x11a1): unit 1 subunit 3
generate_wl_para(0x11a1): unit 1 subunit 4

start_lan: setting MAC address of bridge br0 as 00:90:4C:0F:F2:A7
_ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.2 netmask=255.255.255.0
_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0
_ifconfig: name=lo:0 flags=1043 IFUP addr=127.0.1.1 netmask=255.0.0.0
route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
update_lan_state(lan_, 2, 0)
nat_rule: stop_nat_rules 1.
stop_nat_rules: apply the redirect_rules state 0 ret 0

set exclchans base:
0:[0x100c,0x190a,0x100d,0x190b,0x100e,0x190c]
1:[0xd0a5]
2:[]
start_lan 2385
# wanduck: Got LAN(-1) information:
wanduck: delay 1 seconds before the first detect...
[register_feature] blockfile registered
[register_feature] chknvram registered
[register_feature] misc registered
[are_all_sig_file_valid] Local version file is invalid!
[init] Remove all invalid files
wanduck: delay 2 seconds before the first detect...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
wanduck: delay 3 seconds before the first detect...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
wanduck: delay 4 seconds before the first detect...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001 (1)
acsd: Adjusted channel spec: 0x1001 (1)
acsd: selected DFS-exit channel spec: 0x1001 (1)
acsd: selected channel spec: 0x1001 (1)
acsd: Adjusted channel spec: 0x1001 (1)
acsd: selected channel spec: 0x1001 (1)
acsd: acs_set_chspec: 0x1001 (1) for reason APCS_INIT
wanduck: delay 5 seconds before the first detect...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
wanduck(0): NC send SYS_WAN_CABLE_UNPLUGGED_EVENT.

# Enable direct rule
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected DFS-exit channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT
[1 preinit:start_dnsmasq +28] begin
[1 preinit:stop_dnsmasq +28] begin
[1 preinit:stop_stubby +28] begin
[1 preinit:stop_stubby +28] end
[1 preinit:stop_dnsmasq +28] end
[1 preinit:start_stubby +28] begin
[1 preinit:start_dnsmasq +28] end
start_lan_port(0) 1
stop_amas_lanctrl start_amas_lanctrl 17209
illegal, cannot enable DualWAN
### onboarding model=RT-AC68U, reboot_time=120, connection_timeout=60, traffic_timeout=60
TZ watchdog
amas_lanctrl_main(0x033b): This is ASUS router
msgget ok
get_all_pc_list, enabled_str=, enabled=0.
disk_monitor: starting...
disk_monitor: day=5, week=6, time=13:5.
disk_monitor: decide if scan the target...
disk_monitor: 0: wait_second=36000...
disk_monitor: 1: wait_second=36000...
disk_monitor: wait_second=36000...
disk_monitor: Pause...

[bwdpi check] starting...
get_all_pc_list, enabled_str=, enabled=0.
Couldn't get the enabled rules of Parental-control correctly!
[446 watchdog:btn_check +29] button RESET pressed
[446 watchdog:btn_check +29] button RESET pressed
[446 watchdog:btn_check +29] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
rc: ==> binding interface(vlan1,eth1,eth2,wds0.*,wds1.*,wds2.*) for lldpd
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +30] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
[446 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +31] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +32] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
vlan1: cmd=14 (errno 95): Operation not supported
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
start_wan: start_wan_if(0)!
[1 preinit:start_wan_if +33] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
update_wan_state(wan0_, 1, 0)
start_wan_if(0x079c): ifup:eth0
_ifconfig: name=eth0 flags=1043 IFUP addr= netmask=
start_wan_if(0x07af): start auth:0
start_auth:: done
start_wan_if(0x07b3): start udhcpc:eth0, 0
start_wan_if(): End.
Enable USB power.
Start USB with the original procedure.
start_usb
no tune_bdflush
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!
[446 watchdog:btn_check +33] button RESET pressed
You can release RESET button now!

hsj19***

为什么没人啊

Maxim***

hsj19940704 发表于 2023-8-10 16:52
为什么没人啊

刷回  原来的 cfe  ,在升级网件的固件

qink***

楼上正解

elev***

找到方法了嘛。。。。。。