恩山无线论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
楼主: hiboyhiboyhiboy

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

    [复制链接]
 楼主| 发表于 2015-12-8 11:28 | 显示全部楼层
zip027 发表于 2015-12-8 10:47
12-6 菲讯712的16M固件依然不能启动(已经连续三个版本了),8M固件正常,5G灯也可以亮了

我今晚回去看看配置项
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2015-12-8 11:44 | 显示全部楼层
本帖最后由 hiboyhiboyhiboy 于 2015-12-8 11:47 编辑
liou8272 发表于 2015-12-7 20:51
楼主,我把双引号换成单引号了,还是不能运行啊,直接就显示{连接AP:脚本完成}而且【没这个文件/tmp/apc ...

找到原因了,由于我在有5G的路由测试,没发现只有2.4G的路由运行脚本一个错误。
你把AP脚本中,下面的地方改""后(2个地方需要修改""),只有2.4G的路由就能用了

ap=`iwconfig | grep 'apcli0' | grep 'ESSID:""' | wc -l`
if [ "$ap" = "" ] ; then
ap=`iwconfig | grep 'apclii0' | grep 'ESSID:""' | wc -l`

我会在下次更新修复这个脚本

点评

非常感谢楼主!晚上回去试试!  详情 回复 发表于 2015-12-8 12:16
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 12:02 来自手机 | 显示全部楼层
希望班主添加fir300m改版内存64加usb滴

点评

既然改了内存,闪存也会改吧,刷个其他型号64M的固件就行。例如RY1_64M  详情 回复 发表于 2015-12-8 23:53
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 12:16 | 显示全部楼层
hiboyhiboyhiboy 发表于 2015-12-8 11:44
找到原因了,由于我在有5G的路由测试,没发现只有2.4G的路由运行脚本一个错误。
你把AP脚本中,下面的地 ...

非常感谢楼主!晚上回去试试!

点评

谢谢楼主,可以用了了!非常感谢!  详情 回复 发表于 2015-12-8 17:54
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 12:26 | 显示全部楼层
好有耐心的持续更新啊。。顶顶,就差一个NEWIFI了
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 13:13 | 显示全部楼层
Dec  8 13:09:43 SS: 网络连接s-s中断14,重启s-s1
Dec  8 13:09:43 【s-s】: set_up
Dec  8 13:09:43 SS: Your Server IP:127.0.0.1
Dec  8 13:09:43 dnsmasq[5226]: exiting on receipt of SIGTERM
Dec  8 13:09:43 dnsmasq[5307]: started, version 2.75 cachesize 512
Dec  8 13:09:43 dnsmasq[5307]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec  8 13:09:43 dnsmasq-dhcp[5307]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Dec  8 13:09:43 dnsmasq-dhcp[5307]: DHCP, sockets bound exclusively to interface br0
Dec  8 13:09:43 dnsmasq[5307]: read /etc/hosts - 3 addresses
Dec  8 13:09:43 dnsmasq[5307]: read /etc/storage/dnsmasq/hosts - 1 addresses
Dec  8 13:09:43 dnsmasq-dhcp[5307]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec  8 13:09:43 dnsmasq[5307]: using nameserver 211.140.13.188#53
Dec  8 13:09:43 dnsmasq[5307]: using nameserver 211.140.188.188#53
Dec  8 13:09:43 【s-s】: flush
Dec  8 13:09:46 s-s: stop
Dec  8 13:09:46 pdnsd: stop
Dec  8 13:09:46 chinadns: stop
Dec  8 13:09:46 Pcap_DNSProxy: stop
Dec  8 13:09:46 chinadns: restart
Dec  8 13:09:46 admin: Started chinadns from .
Dec  8 13:09:46 pdnsd: restart
Dec  8 13:09:46 admin: Started pdnsd from .
Dec  8 13:09:46 s-s: restart
Dec  8 13:09:46 admin: Started ss-redir from .
Dec  8 13:09:50 【s-s】: ipset
Dec  8 13:09:53 【s-s】: rules
Dec  8 13:09:54 dnsmasq[5307]: exiting on receipt of SIGTERM
Dec  8 13:09:54 dnsmasq[5509]: started, version 2.75 cachesize 512
Dec  8 13:09:54 dnsmasq[5509]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec  8 13:09:54 dnsmasq[5509]: warning: ignoring resolv-file flag because no-resolv is set
Dec  8 13:09:54 dnsmasq-dhcp[5509]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Dec  8 13:09:54 dnsmasq-dhcp[5509]: DHCP, sockets bound exclusively to interface br0
Dec  8 13:09:54 dnsmasq[5509]: using nameserver 127.0.0.1#5353
Dec  8 13:09:54 dnsmasq[5509]: read /etc/hosts - 3 addresses
Dec  8 13:09:54 dnsmasq[5509]: read /etc/storage/dnsmasq/hosts - 1 addresses
Dec  8 13:09:54 dnsmasq-dhcp[5509]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec  8 13:09:54 dnsmasq[5509]: using nameserver 127.0.0.1#5353
Dec  8 13:11:02 chinadns: restart
Dec  8 13:11:02 admin: Started chinadns from .
Dec  8 13:11:02 SS: 找不到chinadns进程15,重启chinadns
Dec  8 13:11:07 dnsmasq[5509]: exiting on receipt of SIGTERM
Dec  8 13:11:07 dnsmasq[5663]: started, version 2.75 cachesize 512
Dec  8 13:11:07 dnsmasq[5663]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec  8 13:11:07 dnsmasq[5663]: warning: ignoring resolv-file flag because no-resolv is set
Dec  8 13:11:07 dnsmasq-dhcp[5663]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Dec  8 13:11:07 dnsmasq-dhcp[5663]: DHCP, sockets bound exclusively to interface br0
Dec  8 13:11:07 dnsmasq[5663]: using nameserver 127.0.0.1#5353
Dec  8 13:11:07 dnsmasq[5663]: read /etc/hosts - 3 addresses
Dec  8 13:11:07 dnsmasq[5663]: read /etc/storage/dnsmasq/hosts - 1 addresses
Dec  8 13:11:07 dnsmasq-dhcp[5663]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec  8 13:11:07 dnsmasq[5663]: using nameserver 127.0.0.1#5353
Dec  8 13:11:23 SS: 网络连接s-s中断16,重启s-s1
Dec  8 13:11:23 【s-s】: set_up
Dec  8 13:11:23 SS: Your Server IP:127.0.0.1
Dec  8 13:11:23 dnsmasq[5663]: exiting on receipt of SIGTERM
Dec  8 13:11:23 dnsmasq[5733]: started, version 2.75 cachesize 512
Dec  8 13:11:23 dnsmasq[5733]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec  8 13:11:23 dnsmasq-dhcp[5733]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Dec  8 13:11:23 dnsmasq-dhcp[5733]: DHCP, sockets bound exclusively to interface br0
Dec  8 13:11:23 dnsmasq[5733]: read /etc/hosts - 3 addresses
Dec  8 13:11:23 dnsmasq[5733]: read /etc/storage/dnsmasq/hosts - 1 addresses
Dec  8 13:11:23 dnsmasq-dhcp[5733]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec  8 13:11:23 dnsmasq[5733]: using nameserver 211.140.13.188#53
Dec  8 13:11:23 dnsmasq[5733]: using nameserver 211.140.188.188#53
Dec  8 13:11:23 【s-s】: flush
Dec  8 13:11:26 s-s: stop
Dec  8 13:11:26 pdnsd: stop
Dec  8 13:11:26 chinadns: stop
Dec  8 13:11:26 Pcap_DNSProxy: stop
Dec  8 13:11:26 chinadns: restart
Dec  8 13:11:26 admin: Started chinadns from .
Dec  8 13:11:26 pdnsd: restart
Dec  8 13:11:26 admin: Started pdnsd from .
Dec  8 13:11:27 s-s: restart
Dec  8 13:11:27 admin: Started ss-redir from .
Dec  8 13:11:31 【s-s】: ipset
Dec  8 13:11:33 【s-s】: rules
Dec  8 13:11:34 dnsmasq[5733]: exiting on receipt of SIGTERM
Dec  8 13:11:34 dnsmasq[5925]: started, version 2.75 cachesize 512
Dec  8 13:11:34 dnsmasq[5925]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec  8 13:11:34 dnsmasq[5925]: warning: ignoring resolv-file flag because no-resolv is set
Dec  8 13:11:34 dnsmasq-dhcp[5925]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Dec  8 13:11:34 dnsmasq-dhcp[5925]: DHCP, sockets bound exclusively to interface br0
Dec  8 13:11:34 dnsmasq[5925]: using nameserver 127.0.0.1#5353
Dec  8 13:11:34 dnsmasq[5925]: read /etc/hosts - 3 addresses
Dec  8 13:11:34 dnsmasq[5925]: read /etc/storage/dnsmasq/hosts - 1 addresses
Dec  8 13:11:34 dnsmasq-dhcp[5925]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec  8 13:11:34 dnsmasq[5925]: using nameserver 127.0.0.1#5353
这是怎么回事啊用着用着就这样了,求高手帮忙

点评

我之前也是,后来我用一个u盘格式化成nfts插上去在用就好了,虽然我其实还是安装在内存的  详情 回复 发表于 2015-12-8 15:43
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 15:30 | 显示全部楼层
@hiboyhiboy
下一版能不能让WHR-300HP2的无线LED在设成”无线电台,活动”*“"时闪动起来。几个路由器用一个SSID,接上后还没有把握,不方便。
谢谢。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 15:43 | 显示全部楼层
168885 发表于 2015-12-8 13:13
Dec  8 13:09:43 SS: 网络连接s-s中断14,重启s-s1
Dec  8 13:09:43 【s-s】: set_up
Dec  8 13:09:43 SS ...

我之前也是,后来我用一个u盘格式化成nfts插上去在用就好了,虽然我其实还是安装在内存的
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 15:48 | 显示全部楼层
whr-300hp2刷padavan固件后,无线的连接终于好了,两个路由器是隔墙放置的,下级是FIR302M,原来刷原厂和DD-WRT,路由器放在同一张桌上,也难上144,还以为是天线断了一边,现在,呵呵。 新建位图图像.jpg

点评

要开40MHz才有300M速率 如果只有20MHz就最高150M了  详情 回复 发表于 2015-12-9 09:02
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 17:34 来自手机 | 显示全部楼层
楼主,我用班瓦工的vps做的ss和pptp,用ss很慢,用virtual**分流速度快一些,但是用时间长了,访问国内网站也会走virtual**流量,能不能再优化下脚本。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 17:48 | 显示全部楼层
panli_victory 发表于 2015-12-8 08:21
Dec  8 07:37:26 dnsmasq[15704]: read /etc/hosts - 3 addresses
Dec  8 07:37:26 dnsmasq[15704]: read  ...

我把SS_DOWNLOAD的下载秒数去掉,没有那么频繁下载不正常了,几小时就1次。你可以参考一下

点评

请问这位兄弟,你说的SS_DOWNLOAD下载秒数在哪里设置 ,我找了会没有找到。谢谢  详情 回复 发表于 2015-12-9 10:38
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 17:54 | 显示全部楼层
liou8272 发表于 2015-12-8 12:16
非常感谢楼主!晚上回去试试!

谢谢楼主,可以用了了!非常感谢!
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 18:39 | 显示全部楼层
多谢分享啊!!!!
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 20:24 | 显示全部楼层
谁能教我一下,SD卡也格式化成NTFS,怎么就是在Aidisk下看不到。我是极1S,无USB口。
Dec  8 19:52:25 kernel: mmc0: new high speed SD card at address d7c9
Dec  8 19:52:25 kernel: mmcblk0: mmc0:d7c9 SD01G 982 MiB
Dec  8 19:52:25 kernel:  mmcblk0: p1
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-12-8 20:24 | 显示全部楼层
请教下楼主 用这个版本自带的TR下载总是会下载块错误,然后上传的时候停止...有什么办法能解决嘛?之前用华硕固件自带的下载大师就没有这个问题
我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2019-10-14 11:17

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表