|
路由器用的好好的就变砖了,用TFTL刷机显示超时,ping路由器192.168.1.1不通!用PL2303HX ttl线连接路由器用SecureCRT(ctrl+c接电)找不到其他帖子说的CFE,按键盘没反应,显示如下:
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 veJump to image start=0x80500000...
decompressing kernel:
Uncomp done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
RTL8192C/RTL8188C driver version 1.4 (2010-08-11)
serial console detected. Disabling virtual terminals.
init started: BusyBox v1.00-pre8 (2010.11.04-06:45+0000) multi-call binary
BusyBox v1.00-pre8 (2010.11.04-06:45+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
39
plese restore default
header.size=6;pMib.size=19517
read hs MIB failed!
asdfsggtrrg******************************************************************************************
The system is going down NOW !!
Sending SIGTERM to all processes.
Terminated
39: Terminated
Sending Please stand by while rebooting the system.
=============================
<Probe SPI #0 >
1.Manufacture ID=0x0000001c
2.Device ID=0x00000031
3.Capacity ID=0x00000016
4.EON SPI (4 MByte)!
5.Total sector-counts = 1024(sector=4KB)
6.spi_flash_info[0].device_size = 22
01_8198_SFCR(b8001200) =1f800000
01_8198_SFCR2(b8001204) =0bb08000
01_8198_SFCSR(b8001208) =c8000000
---RealTek(RTL8196C)at 2010.11.15-10:23+0800 version v1.1c [16bit](390MHz)
no sys signature at 00010000!
no sys signature at 00020000!
路由器好像再不停重启!不是说CTRL+C就不会启动嘛??那里出问题了???
我只想救活路由刷个官方的就行,没奢望DD或者番茄!
求高手帮我看看哪里出问题了?? |
|