求一份fudy mt3000的emmc备份文件

baigon

求一份fudy mt3000的emmc备份文件 求一份fudy mt3000的emmc备份文件

geek1110

我的也砖了   请问救砖成功了吗

倒影年华

geek1110 发表于 2025-2-16 13:38
我的也砖了   请问救砖成功了吗

没有原机备份的话  没法救活  只能烧录第三方系统

hoang263

Hi, I have this router and have original backups. Do you still need it?

hoang263

geek1110 发表于 2025-2-16 13:38
我的也砖了   请问救砖成功了吗

I can share. By the way, guys, does your 8GB eMMC router come with only 2GB mmcblck0p6 partition for packages and with 5.3GB empty hidden partition mmcblck0p7? I don't know if it was a mistake from the factory, but huasifei support told me it's impossible to merge them. Anyway, I was able to merge and use the whole space for the packages successfully (now I have 7.6GB storage).

baigon

hoang263 发表于 2025-2-27 15:55
I can share. By the way, guys, does your 8GB eMMC router come with only 2GB mmcblck0p6 partition f ...

Yes, the 5.3GB partition can be expanded and merged.

geek1110

hoang263 发表于 2025-2-27 11:05
Hi, I have this router and have original backups. Do you still need it?

Yes，I need it.

hoang263

geek1110 发表于 2025-3-1 18:28
Yes，I need it.

https://mega.nz/file/3VlABbIC#tm ... PSsuQDnE_PZ5p-dIjhg Here is the archive with stock partitions from mmcblck0p1 to mmcblck0p6. Last partition is 2GB. You can enlarge it after you recover your device. Let me know if you need anything else, please.

hoang263

1. sgdisk -p /dev/mmcblk0
   
2. Disk /dev/mmcblk0: 15269888 sectors, 7.3 GiB
   
3. Sector size (logical/physical): 512/512 bytes
   
4. Disk identifier (GUID): 2BD17853-102B-4500-AA1A-8A21D4D7984D
   
5. Partition table holds up to 128 entries
   
6. Main partition table begins at sector 2 and ends at sector 33
   
7. First usable sector is 34, last usable sector is 14942174
   
8. Partitions will be aligned on 1024-sector boundaries
   
9. Total free space is 11197 sectors (5.5 MiB)
   
10. 
    
11. Number  Start (sector)    End (sector)  Size       Code  Name
    
12.    1            8192            9215   512.0 KiB   8300  u-boot-env
    
13.    2            9216           13311   2.0 MiB     8300  factory
    
14.    3           13312           21503   4.0 MiB     8300  fip
    
15.    4           21504           29695   4.0 MiB     8300  config
    
16.    5           29696           62463   16.0 MiB    8300  kernel
    
17.    6           62464         4256767   2.0 GiB     8300  rootfs
    
18.    7         4257792        14940159   5.1 GiB     8300

复制代码

hoang263

By the way, guys, I've been able to extract original DTS from the factory QWRT firmware https://pastebin.com/LZWSzyRs
Applied it to the Hanwick ImmortalWRT fork for MediaTek based on OpenWRT 21.02. It's working. The only thing is eth0 LAN is not working for now. I am trying to fix it. Also, MAC addresses are random (not from the factory). If you can help me, I would love to get any suggestions. I've made a PR https://github.com/hanwckf/immortalwrt-mt798x/pull/381 to hanwick github.

hoang263

I've found recently there is a `huasifei-oc` package in the factory firmware, and you can run `unlockoc` command in SSH to replace a bootloader with 1.6GHz version so Fudy WH3000 CPU will start working overclocked by 1.6GHz. If you want to switch back to 1.3Ghz, just run `lockoc`.

Checking your CPU speed may be challenging since the system doesn't show correct numbers. You can run `mhz` to see your CPU speed. Also you can benchmark it by
Installing `openssl-util` and running

1. openssl speed sha256
   
2. openssl speed aes-128-cbc

复制代码

It will give you bigger numbers on 1.6Ghz.
This is just for fun. I am not sure if you need to overclock your router in a real life.