利用 Imagebuilder 可以生成自己所需要的固件, 告别和别人伸手乞讨固件的磨练

希阳

貌似还是编译一下兼容性好点吧？

qiushui_007

利用DS2490读取DS18B20中的温度值, 然后发到 yeelink, 然后可以在网上看到具体的温度数值.
http://www.yeelink.net/devices/391

1. 拷贝文件到特定目录, 加可执行权限
cd /xutest
chmod +x  ow_oss

2. 执行如下
root@OpenWrt:/xutest# ./ow_oss
Ret = 1,  29.5, 2013-08-07T07:11:59

3. 定义为每5分钟执行一次,
WR703N下, 修改 /etc/crontabs/root, 增加如下:
*/5 * * * * /xutest/ow_oss >> /xutest/ow_oss.txt

4. 运行并设为开机自启动
/etc/init.d/cron start
/etc/init.d/cron enable

5.  运行的部分结果如下root@OpenWrt:/xutest# cat ow_oss.txt
Ret = 1,  29.0, 2013-08-07T06:25:01
Ret = 1,  29.5, 2013-08-07T06:30:01
Ret = 1,  29.0, 2013-08-07T06:35:01
Ret = 1,  29.5, 2013-08-07T06:40:01
Ret = 1,  29.5, 2013-08-07T06:45:01
Ret = 1,  29.0, 2013-08-07T06:50:01
Ret = 1,  29.5, 2013-08-07T06:55:01
Ret = 1,  29.5, 2013-08-07T07:00:01
Ret = 1,  29.0, 2013-08-07T07:05:01
Ret = 1,  29.5, 2013-08-07T07:10:01
Ret = 1,  29.5, 2013-08-07T07:15:01
Ret = 1,  29.5, 2013-08-07T07:20:01

superyongzhe

谢谢分享！！！！！！！！！！！！！！！！！！！！

dkxj213

我是来学习的。

caoxingk

qiushui_007 发表于 2013-8-7 15:17
利用DS2490读取DS18B20中的温度值, 然后发到 yeelink, 然后可以在网上看到具体的温度数值.
http://www.ye ...

这个很高大上的样子，703n内置了这个传感器么？（不好意思没仔细看板子和datasheet）

然后，文件是elf唉，能自己编译么，想集成到luci

hnyzalex

这个给力。。。学习中。。

WR745User

新手，感觉对我有帮助。

johnnyl_get

WARNING: Image file /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-sysupgrade.bin is too big
cp /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-sysupgrade.bin /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/bin/ramips/openwrt-ramips-mt7620-ex2700-squashfs-sysupgrade.bin
cp: cannot stat '/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-sysupgrade.bin': No such file or directory
make[3]: [/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/bin/ramips/openwrt-ramips-mt7620-ex2700-squashfs-sysupgrade.bin] Error 1 (ignored)
[ -f /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/ex2700-kernel.bin -a -f /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/root.squashfs ]
dd if=/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/ex2700-kernel.bin  >> /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin
2688+0 records in
2688+0 records out
1376256 bytes (1.4 MB) copied, 0.00569733 s, 242 MB/s
dd if=/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/root.squashfs  >> /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin
7769+1 records in
7769+1 records out
3977762 bytes (4.0 MB) copied, 0.0159542 s, 249 MB/s
/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/staging_dir/host/bin/padjffs2 /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin  4 8 16 64 128 256
padding image to 0051c000
padding image to 00520000
padding image to 00540000
WARNING: Image file /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin is too big
/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/staging_dir/host/bin/mkdniimg -B EX2700 -H 29764623+4+0+32+2x2+0 -v OpenWrt -i /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin -o /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin.new && mv /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin.new /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin
[mkdniimg] *** error: stat failed on /root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin: No such file or directory
make[3]: *** [/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/build_dir/target-mipsel_24kec+dsp_musl-1.1.16/linux-ramips_mt7620/tmp/openwrt-ramips-mt7620-ex2700-squashfs-factory.bin] Error 1
make[3]: Leaving directory `/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64/target/linux/ramips/image'
make[2]: *** [build_image] Error 2
make[2]: Leaving directory `/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64'
make[1]: *** [_call_image] Error 2
make[1]: Leaving directory `/root/OpenWrt-ImageBuilder-ramips-mt7620.Linux-x86_64'
make: *** [image] 错误 2
安装的包：

Configuring terminfo.
Configuring libubox.
Configuring libuci.
Configuring liblua.
Configuring libuci-lua.
Configuring libuclient.
Configuring uclient-fetch.
Configuring opkg.
Configuring kmod-nls-base.
Configuring kmod-usb-core.
Configuring libpthread.
Configuring libubus.
Configuring libjson-c.
Configuring libblobmsg-json.
Configuring ubusd.
Configuring ubus.
Configuring libnl-tiny.
Configuring iw.
Configuring rpcd.
Configuring busybox.
Configuring odhcpd.
Configuring luci-lib-ip.
Configuring libubus-lua.
Configuring kmod-tun.
Configuring libiwinfo.
Configuring libiwinfo-lua.
Configuring swconfig.
Configuring zlib.
Configuring libopenssl.
Configuring openssl-util.
Configuring kmod-lib-crc-ccitt.
Configuring kmod-ledtrig-usbdev.
Configuring luci-theme-bootstrap.
Configuring kmod-slhc.
Configuring kmod-ppp.
Configuring kmod-pppox.
Configuring kmod-pppoe.
Configuring kmod-nf-ipt.
Configuring kmod-ipt-core.
Configuring kmod-nf-conntrack.
Configuring kmod-ipt-conntrack.
Configuring jshn.
Configuring netifd.
Configuring libjson-script.
Configuring ubox.
Configuring procd.
Configuring jsonfilter.
Configuring usign.
Configuring fstools.
Configuring base-files.
Configuring kmod-nf-nat.
Configuring kmod-cfg80211.
Configuring hostapd-common.
Configuring kmod-mac80211.
Configuring kmod-lib-crc-itu-t.
Configuring kmod-rt2x00-lib.
Configuring kmod-rt2800-lib.
Configuring librt.
Configuring quagga.
Configuring quagga-libzebra.
Configuring quagga-bgpd.
Configuring quagga-watchquagga.
Configuring kmod-usb-ohci.
Configuring dnsmasq.
Configuring kmod-mt76.
Configuring kmod-eeprom-93cx6.
Configuring kmod-rt2x00-mmio.
Configuring kmod-rt2x00-pci.
Configuring kmod-rt2800-mmio.
Configuring rt2800-pci-firmware.
Configuring kmod-rt2800-pci.
Configuring libreadline.
Configuring libncursesw.
Configuring quagga-vtysh.
Configuring kmod-usb2.
Configuring libxtables.
Configuring libip4tc.
Configuring libip6tc.
Configuring kmod-ipt-nat.
Configuring firewall.
Configuring luci-app-firewall.
Configuring kmod-nf-conntrack6.
Configuring kmod-nf-ipt6.
Configuring kmod-ip6tables.
Configuring odhcp6c.
Configuring uci.
Configuring lua.
Configuring wpad-mini.
Configuring dropbear.
Configuring mtd.
Configuring luci-proto-ppp.
Configuring ppp.
Configuring luci-lib-nixio.
Configuring luci-lib-jsonc.
Configuring luci-base.
Configuring luci-mod-admin-full.
Configuring kmod-leds-gpio.
Configuring kmod-gpio-button-hotplug.
Configuring logd.
Configuring liblzo.
Configuring luci-proto-ipv6.
Configuring iptables.
Configuring openvirtual**-openssl.
Configuring openvirtual**-easy-rsa.
Configuring uhttpd.
Configuring ip6tables.
Configuring uhttpd-mod-ubus.
Configuring rpcd-mod-rrdns.
Configuring luci.
Configuring kmod-rt2800-soc.
Configuring quagga-zebra.
Configuring ppp-mod-pppoe.

您好，它提示包较大，但这些软件我是已经安装过了，我的想法是自定义一个固件，即使reset了，也不会丢失openvirtual**和quagga的配置。请问这个是什么原因造成的？

make image  PACKAGES="luci openvirtual**-openssl openvirtual**-easy-rsa quagga quagga-zebra quagga-watchquagga quagga-vtysh quagga-bgpd quagga-libzebra" FILES=etc

papagogo

imagebuilder, SDK他使用教程，感谢了

小tan

请问它不支持自己的路由的话，怎么办？能去哪下载合适自己路由的imagebuilder吗？

dongfangy2011

这么老的帖子都翻出来了，厉害呀

瘦身达人

马克一下回头练习