|
U-Boot 1.1.3 (Oct 30 2012 - 14:40:33)
Board: Ralink APSoC DRAM: 16 MB
relocate_code Pointer at: 80fb4000
config usb....
spi_wait_nsec: 72
spi device id: ef 40 16 0 0 (40160000)
find flash: W25Q32BV
raspi_read: from:20000 len:1000
.*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 3.4.0.0
--------------------------------------------
ASIC 3052_MP2 (Port5<->None)
DRAM component: 256 Mbits SDR
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:Oct 30 2012 Time:14:40:33
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 320 MHZ ####
SDRAM bus set to 16 bit
SDRAM size =16 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
0
3: System Boot system code via Flash.
## Booting image at bf040000 ...
raspi_read: from:40000 len:40
. Image Name: Linux Kernel Image
Created: 2013-02-28 7:28:19 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1687089 Bytes = 1.6 MB
Load Address: 80000000
Entry Point: 8026a000
raspi_read: from:40040 len:19be31
.......................... Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8026a000) ...
## Giving linux memsize in MB, 16
Starting kernel ...
LINUX started...
THIS IS ASIC
init started: BusyBox v1.12.1 (2013-02-28 15:22:37 CST)
starting pid 13, tty '': '/etc_ro/rcS'
mount: mounting none on /proc/bus/usb failed: No such file or directory
/etc_ro/rcS: line 43: wdg.sh: not found
chpasswd.sh
Password for 'admin' changed
ifconfig: ioctl 0x8913 failed: No such device
brctl: bridge br0: No such device or address
brctl: bridge br0: Invalid argument
ifconfig: ioctl 0x8913 failed: No such device
killall: udhcpd: no process killed
killall: apcliautoconn: no process killed
starting pid 407, tty '': '/sbin/getty 57600 /d
AP1112 login:
|
|