我家云，粒子云可用内置硬盘的小钢炮

zhuguulii

omniswang 发表于 2019-11-11 14:38
不太明白 reset是解决掉盘啥意思？准备复位解决？

重启一下吧

omniswang

重启没问题，可以恢复，只是想了解楼主说"reset是解决掉盘"是什么意思

yang2224295

开机，如果拷入文件不掉盘，则不会掉盘，否则就掉盘。

omniswang

你是说这个有体质问题？不掉的我家云永远不会掉？

zero264

感谢大佬，测试了armbian的几个版本，有掉了就挂不回去的情况，麻烦大佬看看有没有解？
Nov 10 23:17:14 localhost kernel: [    2.210969] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 10 23:17:14 localhost kernel: [    2.210997] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
Nov 10 23:17:14 localhost kernel: [    2.211206] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Nov 10 23:17:14 localhost kernel: [    2.211277] xhci-hcd xhci-hcd.0.auto: irq 170, io mem 0xff600000
Nov 10 23:17:14 localhost kernel: [    2.211845] usb usb4: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.211855] usb usb4: SerialNumber: xhci-hcd.0.auto
Nov 10 23:17:14 localhost kernel: [    2.213054] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 10 23:17:14 localhost kernel: [    2.213077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
Nov 10 23:17:14 localhost kernel: [    2.213099] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Nov 10 23:17:14 localhost kernel: [    2.213453] usb usb5: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.213463] usb usb5: SerialNumber: xhci-hcd.0.auto
Nov 10 23:17:14 localhost kernel: [    2.548704] usb 4-1: new high-speed USB device number 2 using xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.853444] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Nov 10 23:17:14 localhost kernel: [    8.416781] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:17:14 localhost kernel: [   12.888596] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 10 23:23:36 localhost kernel: [   51.157857] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:23:42 localhost kernel: [   56.533879] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:23:42 localhost kernel: [   57.070314] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 00:15:13 localhost kernel: [ 3148.063590] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:15:19 localhost kernel: [ 3153.439625] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:15:19 localhost kernel: [ 3153.976058] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 00:23:25 localhost kernel: [ 3640.108186] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:23:31 localhost kernel: [ 3645.484346] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:23:31 localhost kernel: [ 3646.020701] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 02:09:56 localhost kernel: [10030.800886] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:10:01 localhost kernel: [10036.177001] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:10:08 localhost kernel: [10043.089186] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
Nov 11 02:10:08 localhost kernel: [10043.105208] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
Nov 11 02:10:08 localhost kernel: [10043.105218] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
Nov 11 02:10:08 localhost kernel: [10043.105276] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
Nov 11 02:10:08 localhost kernel: [10043.105453] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:17:57 localhost kernel: [    2.210987] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 11 02:17:57 localhost kernel: [    2.211017] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
Nov 11 02:17:57 localhost kernel: [    2.211224] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Nov 11 02:17:57 localhost kernel: [    2.211295] xhci-hcd xhci-hcd.0.auto: irq 170, io mem 0xff600000
Nov 11 02:17:57 localhost kernel: [    2.211876] usb usb4: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.211886] usb usb4: SerialNumber: xhci-hcd.0.auto
Nov 11 02:17:57 localhost kernel: [    2.213095] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 11 02:17:57 localhost kernel: [    2.213117] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
Nov 11 02:17:57 localhost kernel: [    2.213140] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Nov 11 02:17:57 localhost kernel: [    2.213450] usb usb5: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.213460] usb usb5: SerialNumber: xhci-hcd.0.auto
Nov 11 02:17:57 localhost kernel: [    2.548816] usb 4-1: new high-speed USB device number 2 using xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.860971] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Nov 11 02:17:57 localhost kernel: [    3.225248] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 02:33:28 localhost kernel: [  943.104374] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:33:33 localhost kernel: [  948.476530] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:33:40 localhost kernel: [  955.388606] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
Nov 11 02:33:40 localhost kernel: [  955.404621] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
Nov 11 02:33:40 localhost kernel: [  955.404628] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
Nov 11 02:33:40 localhost kernel: [  955.404666] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
Nov 11 02:33:40 localhost kernel: [  955.404759] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command

Ride_Wind

一般掉了都会自动挂回去，还没遇到过掉了挂不回去的情况。

zero264

确实很奇怪，偶尔能挂回去，偶尔就真的掉了。

zero264

前面还是有几条reset的记录，但是都坚持不长，几个小时内肯定会彻底掉，重启后又能继续工作。

omniswang

我每次都挂不回去，我今天已经复现很多次，只要没有访问，放着一段时间就掉了，手动重启才能恢复

Ride_Wind

omniswang 发表于 2019-11-11 17:13
我每次都挂不回去，我今天已经复现很多次，只要没有访问，放着一段时间就掉了，手动重启才能恢复

你硬盘坏道 多不多。

omniswang

不多吧，有关系吗？原来贝壳没掉过。现在发现只要放一会儿没有访问，必掉了

Ride_Wind

omniswang 发表于 2019-11-11 18:24
不多吧，有关系吗？原来贝壳没掉过。现在发现只要放一会儿没有访问，必掉了

读取超时会reset，掉盘的情况现在少见。我也是7200转的日立企业级硬盘，正常使用没掉过。

omniswang

我刚刚又试了一下，没有访问放那儿，一会儿就掉了，需要重启，你们是挂pt一直有访问吧？

omniswang

这个只跑了几十分钟就又掉了

Ride_Wind

omniswang 发表于 2019-11-11 19:20
这个只跑了几十分钟就又掉了

你的比较特殊。。。