找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: d_zhou

中移动宽带送的家庭网关:FemTel F100-T

[复制链接]
发表于 2016-5-23 18:24 | 显示全部楼层
这个网关还有一个配置页面 10.10.10.253  不知道密码,大家谁知道密码
或者怎么找出密码 我练了ttl显示如下,请大师们指点



U-Boot 1.3.4-svn (Apr 14 2011 - 15:01:10) picochip-3.2.3-pc7802

Build: picoChip pc7802
Device: PC202
Board: 7802
FPGA:  v1.2
DRAM:  64 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Net:   pc20x_emac
ENV mac[0] : 00
ENV mac[1] : c0
ENV mac[2] : 02
ENV mac[3] : 12
ENV mac[4] : 35
ENV mac[5] : 88
Update RAM ENV using Ser MAC...
Hit any key to stop autoboot:  1  0

***************************************************
  SC Boot Version 0.4.0.2
***************************************************
in func get_RunningFlag
Running flag value: 0x7f
runging flag is 1
pid_addr 0x 1671000
dbSign Addr: 0x21671008
imgNum: 2
img 0: start addr: 0x  c80100, length: 0x  1b2aa8
crc32 result: 0x2786727e
checksum: 0x2786727e
check sum OK
img 1: start addr: 0x  e80000, length: 0x  7f1000
crc32 result: 0xca938cc4
checksum: 0xca938cc4
check sum OK
in func get_RunningFlag
Running flag value: 0x7f
runging flag is 1
## Booting kernel from Legacy Image at 20c80100 ...
   Image Name:   Linux-2.6.28-picochip-3.2.3
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1780328 Bytes =  1.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................ done, booting the kernel.
Linux version 2.6.28-picochip-3.2.3 (samson_sun@arch_server) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #22 PREEMPT Thu Jan 12 15:22:56 CST 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: pc7802 Platform
Memory policy: ECC disabled, Data cache writeback
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: root=/dev/mtdblock3 rw rootfstype=jffs2 ip=172.21.15.196:172.21.15.155:172.21.15.248:255.255.0.0:picopc7802:eth0:any console=ttyS1,115200 pc20x_mem=32M@0x00000000 pc20x_mem=32M@0x04000000
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB 32MB = 64MB total
Memory: 61212KB available (3172K code, 374K data, 100K init)
Calibrating delay loop... 137.72 BogoMIPS (lpj=68864)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 480 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
pc20x DMA Controller Driver version v0.02 loaded
pc20x EMAC version 0.06 loaded
pc20x MII Bus: probed
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
msgmni has been set to 119
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xffe40000 (irq = 9) is a 16550A
serial8250.0: ttyS1 at MMIO 0xffe50000 (irq = 10) is a 16550A
console [ttyS1] enabled
fpga_cpe20x: fpga device driver Jan 10 2012 16:48:26
loop: module loaded
PC202 GPIO Driver -picochip-3.2.3 Jan 10 2012 16:48:06 loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
picoFlash: 0x2000000 at 0x20000000
picohdp_map.virt c7000000
picoFlash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
picoFlash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
mymtd not NULL!
Creating 10 MTD partitions on "picoFlash":
0x00240000-0x00c80000 : "Application1"
0x00040000-0x00240000 : "Kernel1"
0x00e80000-0x018c0000 : "Application2"
0x00c80000-0x00e80000 : "Kernel2"
0x00020000-0x00040000 : "Boot Environment"
0x00000000-0x00020000 : "Boot"
0x01ec0000-0x01fc0000 : "Config"
0x01fc0000-0x01fe0000 : "Reserve"
0x01fe0000-0x02000000 : "Protect"
0x018c0000-0x01ec0000 : "Log Area"
pc20x SPI-GPIO driver, version 0.01 loaded
pc20x-spi-gpio pc20x-spi-gpio.0: registering c0352a48: fpga_cpe20x
Found fpga_cpe20x device id 2
pc20x-spi-gpio pc20x-spi-gpio.0: registering c0352a80: fpga_cpe20x
i2c /dev entries driver
oprofile: using timer interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCTP: Hash tables configured (established 2048 bind 4096)
eth0: Connected to Phy (id = 0x02430c54)
IP-Config: Complete:
     device=eth0, addr=172.21.15.196, mask=255.255.0.0, gw=172.21.15.248,
     host=picopc7802, domain=, nis-domain=(none),
     bootserver=172.21.15.155, rootserver=172.21.15.155, rootpath=
FTL: root device name is /dev/mtdblock3
FTL Debug: fixed the rootfs type to squashfs
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 100K
Warning: unable to open an initial console.

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login: 0

Password:

0

Login incorrect
picopc7802 login: ft_tool uses obsolete (PF_INET,SOCK_PACKET)

Login timed out after 60 seconds

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login: root

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login: root

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login:

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login: 1

Password: root

Login incorrect
picopc7802 login: 10086

Password: root

Login incorrect
picopc7802 login: 10086

Password:

Login incorrect

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login: 10086

Password:

Login incorrect
picopc7802 login:
Login timed out after 60 seconds

picoChip GNU/Linux rootfs-pc7802-3.2.3 100107 picopc7802 ttyS1
picopc7802 login:
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-11-17 19:42 | 显示全部楼层
今天收了一个一模一样的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-11-20 11:06 | 显示全部楼层
这是皮蜂窝,部署于家庭和企业环境的无线接入点,典型的发射功率为100mW,覆盖范围50米,可同时服务用户数8(家庭)到16(企业)人,采用家用现有的网线或光纤回传到运营商的交换网络。

这台,从外观上看,很像是Airspan公司的AirUnity。。

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-11-20 11:10 | 显示全部楼层
哦哦哦
看错了。

是苏州飞烽的产品,http://www.sanxiangtea.cn/about.html
以前他们只做TD-SCDMA的,,,现在也做4G了?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-11-20 11:15 | 显示全部楼层
主芯片是Picochip的PC202
这个是个英国公司,不知道为啥打的TAIWAN的标。

Picochip同时也是上面说的美国的Airspan公司的供应商

怪不得为看这外观都一样呢,,,,曰的,,,都是公版设计。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-11-20 11:18 | 显示全部楼层
cpu是ARM体系的,
http://www.docin.com/p-608926166.html

频率只有280Mhz。
弱爆了,
洗洗睡吧,
干不了什么,,,
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-20 00:27

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表