求助：RG100A-AA无法进入CFE。帮我看你TTL线连接显示的代码

2306913

在OPENWRT下载了一个0414的版本以后。刷机重启后。发现进不去CFE了。也ping不通路由。求给位大神给我支支招、、谢谢了

代码：

CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Wed Jul 29 20:25:16 CST 2009 (kevin@BS5)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000

Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Board Id (0-5)                    : 96358GWVG  
Number of MAC Addresses (1-32)    : 12  
Base MAC Address                  : 00:10:18:00:00:00  
PSI Size (1-64) KBytes            : 24  
Main Thread Number [0|1]          : 0  
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xbe020000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Closing DMA Channels.
Starting program at 0x80010000
Linux version 2.6.32.9 ([url=mailtopenwrtcn@fedora]openwrtcn@fedora[/url]) (gcc version 4.3.3 (GCC) ) #35 Thu Apr 15 23:48:13 CST 2010
Detected Broadcom 0x6358 CPU revision a1
CPU frequency is 300 MHz
32MB of RAM installed
registering 40 GPIOs
board_bcm963xx: CFE version: 1.0.37-102.9
board_bcm963xx: unknown bcm963xx board: 96358GWVG
bootconsole [early0] enabled
CPU revision is: 0002a010 (Broadcom BCM6358)
Kernel panic - not syncing: unable to detect bcm963xx board

1986a

jtag救砖

2306913

1986a 发表于 2015-3-11 09:57
jtag救砖

这个是说明变砖了吗？