找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hiboyhiboyhiboy

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

   火... [复制链接]
发表于 2019-1-2 19:29 | 显示全部楼层
感谢楼主,顺便求助k2p a1未改内存,应该刷哪个版本?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 20:23 | 显示全部楼层
怎么12月25日的,12月31日的固件都没有呢?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 22:42 | 显示全部楼层
lxhao61 发表于 2019-1-2 18:47
H大,通过几天测试,总算找到newifi3 D2(从2018-10-7版到现在2018-12-31版)软重启,一定概率直接死机问题 ...

问题出在Openvirtual**  这个是啥?我没用到这个,也出现了,元旦放假这几天都挂了。回家才重新断电重启正常。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 22:51 | 显示全部楼层
H大,你的一键更新脚本不能用了,提示找不到MD5.TXT,我在你的服务器目录下找了下,确实没有md5.txt文件
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 23:05 | 显示全部楼层
lxhao61 发表于 2019-1-2 22:48
服务器,直接书写此名称,自动变成Openvirtual**

我都没开过这个东西。。。。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 23:13 来自手机 | 显示全部楼层
?没有资源?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 23:34 | 显示全部楼层
本帖最后由 涼仝灀 于 2019-1-2 23:36 编辑

希望解决一下IPv6的问题,有时拨号连接后不能用,真是难受!

设置


尤其是先获取到WAN IPv6地址,再获取到LAN IPv6地址的时候,肯定不能用


哪个IP显示都正常


就是联不通IPv6

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 00:14 | 显示全部楼层
本帖最后由 涼仝灀 于 2019-1-3 00:19 编辑

新固件正在编译中吗?体积怎么那么小了...
看错行了,没有小...
也可能是没编译完...
时间是昨天的,也许是没传完...
今天newifimini感觉信号有问题,不知是不是31号固件的事,再更新看看


我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 00:44 | 显示全部楼层
说一个问题,不知道是我设置有误还是有BUG.新3刷好后,2.4g的WIFI名称改成100%后,功能正常连接使用正常。但是2.4g的设置页面就不正常了。看不到SSID的名称,看不到频道,看不到密码!望给位大神前辈指点一哈。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 11:19 | 显示全部楼层
反馈下问题 迅雷下载宝在软重启和硬重启中都无法自动加载移动硬盘 只能拔掉USB再重新插上去重启才能正常挂载和识别 下面提供日志 请排查
Jan  3 10:42:09 kernel: klogd started: BusyBox v1.29.3 (2018-12-25 12:44:37 CST)
Jan  3 10:42:09 kernel: Linux version 3.4.113 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 SMP Tue Dec 25 09:40:32 CST 2018
Jan  3 10:42:09 kernel: MediaTek SoC: MT7621A, RevID: 0103, RAM: DDR3, XTAL: 40MHz
Jan  3 10:42:09 kernel: CPU/OCP/SYS frequency: 880/293/220 MHz
Jan  3 10:42:09 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan  3 10:42:09 kernel: Determined physical RAM map:
Jan  3 10:42:09 kernel:  memory: 10000000 @ 00000000 (usable)
Jan  3 10:42:09 kernel: Zone PFN ranges:
Jan  3 10:42:09 kernel:   Normal   0x00000000 -> 0x00010000
Jan  3 10:42:09 kernel: Movable zone start PFN for each node
Jan  3 10:42:09 kernel: Early memory PFN ranges
Jan  3 10:42:09 kernel:     0: 0x00000000 -> 0x00010000
Jan  3 10:42:09 kernel: On node 0 totalpages: 65536
Jan  3 10:42:09 kernel: free_area_init_node: node 0, pgdat 803d4dc0, node_mem_map 81000000
Jan  3 10:42:09 kernel:   Normal zone: 512 pages used for memmap
Jan  3 10:42:09 kernel:   Normal zone: 0 pages reserved
Jan  3 10:42:09 kernel:   Normal zone: 65024 pages, LIFO batch:15
Jan  3 10:42:09 kernel: Detected 3 available secondary CPU(s)
Jan  3 10:42:09 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan  3 10:42:09 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: PERCPU: Embedded 7 pages/cpu @81203000 s5952 r8192 d14528 u32768
Jan  3 10:42:09 kernel: pcpu-alloc: s5952 r8192 d14528 u32768 alloc=8*4096
Jan  3 10:42:09 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Jan  3 10:42:09 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Jan  3 10:42:09 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Jan  3 10:42:09 kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
Jan  3 10:42:09 kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  3 10:42:09 kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  3 10:42:09 kernel: Writing ErrCtl register=00018108
Jan  3 10:42:09 kernel: Readback ErrCtl register=00018108
Jan  3 10:42:09 kernel: Memory: 255488k/262144k available (3314k kernel code, 6656k reserved, 606k data, 232k init, 0k highmem)
Jan  3 10:42:09 kernel: Hierarchical RCU implementation.
Jan  3 10:42:09 kernel: NR_IRQS:72
Jan  3 10:42:09 kernel: MIPS GIC RevID: 3.0
Jan  3 10:42:09 kernel: Setting up vectored interrupts
Jan  3 10:42:09 kernel: console [ttyS0] enabled
Jan  3 10:42:09 kernel: Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
Jan  3 10:42:09 kernel: pid_max: default: 32768 minimum: 301
Jan  3 10:42:09 kernel: Mount-cache hash table entries: 512
Jan  3 10:42:09 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan  3 10:42:09 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan  3 10:42:09 kernel: Synchronize counters for CPU 1: done.
Jan  3 10:42:09 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan  3 10:42:09 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan  3 10:42:09 kernel: Synchronize counters for CPU 2: done.
Jan  3 10:42:09 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan  3 10:42:09 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Jan  3 10:42:09 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
Jan  3 10:42:09 kernel: Synchronize counters for CPU 3: done.
Jan  3 10:42:09 kernel: Brought up 4 CPUs
Jan  3 10:42:09 kernel: NET: Registered protocol family 16
Jan  3 10:42:09 kernel: PCIe0: no card, disable it (RST&CLK)
Jan  3 10:42:09 kernel: PCIe1: no card, disable it (RST&CLK)
Jan  3 10:42:09 kernel: FPU Affinity set after 4664 emulations
Jan  3 10:42:09 kernel: bio: create slab <bio-0> at 0
Jan  3 10:42:09 kernel: SCSI subsystem initialized
Jan  3 10:42:09 kernel: usbcore: registered new interface driver usbfs
Jan  3 10:42:09 kernel: usbcore: registered new interface driver hub
Jan  3 10:42:09 kernel: usbcore: registered new device driver usb
Jan  3 10:42:09 kernel: Switching to clocksource MIPS
Jan  3 10:42:09 kernel: NET: Registered protocol family 2
Jan  3 10:42:09 kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  3 10:42:09 kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jan  3 10:42:09 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan  3 10:42:09 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan  3 10:42:09 kernel: TCP: reno registered
Jan  3 10:42:09 kernel: UDP hash table entries: 128 (order: 0, 4096 bytes)
Jan  3 10:42:09 kernel: NET: Registered protocol family 1
Jan  3 10:42:09 kernel: PCI: CLS 0 bytes, default 32
Jan  3 10:42:09 kernel: 4 CPUs re-calibrate udelay (lpj = 1167360)
Jan  3 10:42:09 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  3 10:42:09 kernel: msgmni has been set to 499
Jan  3 10:42:09 kernel: io scheduler noop registered
Jan  3 10:42:09 kernel: io scheduler bfq registered (default)
Jan  3 10:42:09 kernel: BFQ I/O-scheduler version: v7r7
Jan  3 10:42:09 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan  3 10:42:09 kernel: serial8250: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a 16550A
Jan  3 10:42:09 kernel: Ralink GPIO driver initialized. Number of GPIO: 64, GPIO mode: 000405AC
Jan  3 10:42:09 kernel: loop: module loaded
Jan  3 10:42:09 kernel: MediaTek SPI flash driver, SPI clock: 44MHz
Jan  3 10:42:09 kernel: SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Jan  3 10:42:09 kernel: Creating 7 MTD partitions on "raspi":
Jan  3 10:42:09 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Jan  3 10:42:09 kernel: 0x000000030000-0x000000040000 : "Config"
Jan  3 10:42:09 kernel: 0x000000040000-0x000000050000 : "Factory"
Jan  3 10:42:09 kernel: 0x000000050000-0x0000001b2b50 : "Kernel"
Jan  3 10:42:09 kernel: 0x0000001b2b50-0x000000f50000 : "RootFS"
Jan  3 10:42:09 kernel: 0x000000f50000-0x000001000000 : "Storage"
Jan  3 10:42:09 kernel: 0x000000050000-0x000000f50000 : "Firmware_Stub"
Jan  3 10:42:09 kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  3 10:42:09 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  3 10:42:09 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
Jan  3 10:42:09 kernel: raeth: PDMA RX ring 512, QDMA TX pool 1024. Max packet size 1536
Jan  3 10:42:09 kernel: raeth: NAPI & GRO support, weight 64
Jan  3 10:42:09 kernel: raeth: Byte Queue Limits (BQL) support
Jan  3 10:42:09 kernel: PPP generic driver version 2.4.2
Jan  3 10:42:09 kernel: PPP MPPE Compression module registered
Jan  3 10:42:09 kernel: NET: Registered protocol family 24
Jan  3 10:42:09 kernel: p p t p driver version 0.8.5
Jan  3 10:42:09 kernel: usbcore: registered new interface driver libusual
Jan  3 10:42:09 kernel: mtk-sd: MediaTek SD/MMC Card driver init
Jan  3 10:42:09 kernel: sdhci: Secure Digital Host Controller Interface driver
Jan  3 10:42:09 kernel: sdhci: Copyright(c) Pierre Ossman
Jan  3 10:42:09 kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Jan  3 10:42:09 kernel: nf_conntrack version 0.5.0 (32768 buckets, 32768 max)
Jan  3 10:42:09 kernel: xt_time: kernel timezone is -0000
Jan  3 10:42:09 kernel: Bridge firewalling registered
Jan  3 10:42:09 kernel: gre: GRE over IPv4 demultiplexor driver
Jan  3 10:42:09 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  3 10:42:09 kernel: TCP: cubic registered
Jan  3 10:42:09 kernel: NET: Registered protocol family 10
Jan  3 10:42:09 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  3 10:42:09 kernel: IPv6 over IPv4 tunneling driver
Jan  3 10:42:09 kernel: NET: Registered protocol family 17
Jan  3 10:42:09 kernel: L2TP core driver, V2.0
Jan  3 10:42:09 kernel: PPPoL2TP kernel driver, V2.0
Jan  3 10:42:09 kernel: 8021q: 802.1Q VLAN Support v1.8
Jan  3 10:42:09 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Jan  3 10:42:09 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Jan  3 10:42:09 kernel: Freeing unused kernel memory: 232k freed
Jan  3 10:42:09 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  3 10:42:09 kernel: usbcore: registered new interface driver usblp
Jan  3 10:42:09 kernel: Initializing USB Mass Storage driver...
Jan  3 10:42:09 kernel: usbcore: registered new interface driver usb-storage
Jan  3 10:42:09 kernel: USB Mass Storage support registered.
Jan  3 10:42:09 kernel: U2PHY P0 set SRCTRL calibration value: 2
Jan  3 10:42:09 kernel: U2PHY P1 set SRCTRL calibration value: 2
Jan  3 10:42:09 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan  3 10:42:09 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
Jan  3 10:42:09 kernel: xhci-hcd xhci-hcd: irq 30, io mem 0x1e1c0000
Jan  3 10:42:09 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  3 10:42:09 kernel: usb usb1: Product: xHCI Host Controller
Jan  3 10:42:09 kernel: usb usb1: Manufacturer: Linux 3.4.113 xhci-hcd
Jan  3 10:42:09 kernel: usb usb1: SerialNumber: xhci-hcd
Jan  3 10:42:09 kernel: xHCI xhci_add_endpoint called for root hub
Jan  3 10:42:09 kernel: xHCI xhci_check_bandwidth called for root hub
Jan  3 10:42:09 kernel: hub 1-0:1.0: USB hub found
Jan  3 10:42:09 kernel: hub 1-0:1.0: 2 ports detected
Jan  3 10:42:09 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
Jan  3 10:42:09 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
Jan  3 10:42:09 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
Jan  3 10:42:09 kernel: usb usb2: Product: xHCI Host Controller
Jan  3 10:42:09 kernel: usb usb2: Manufacturer: Linux 3.4.113 xhci-hcd
Jan  3 10:42:09 kernel: usb usb2: SerialNumber: xhci-hcd
Jan  3 10:42:09 kernel: xHCI xhci_add_endpoint called for root hub
Jan  3 10:42:09 kernel: xHCI xhci_check_bandwidth called for root hub
Jan  3 10:42:09 kernel: hub 2-0:1.0: USB hub found
Jan  3 10:42:09 kernel: hub 2-0:1.0: 1 port detected
Jan  3 10:42:09 kernel: Netfilter messages via NETLINK v0.30.
Jan  3 10:42:09 kernel: ip_set: protocol 6
Jan  3 10:42:09 kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
Jan  3 10:42:09 kernel: usb 2-1: New USB device found, idVendor=05e3, idProduct=0735
Jan  3 10:42:09 kernel: usb 2-1: Product: SHE085
Jan  3 10:42:09 kernel: usb 2-1: Manufacturer: SSK
Jan  3 10:42:09 kernel: usb 2-1: SerialNumber: 14081400135
Jan  3 10:42:09 kernel: scsi0 : usb-storage 2-1:1.0
Jan  3 10:42:09 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Jan  3 10:42:09 kernel: raeth: HW VLAN RX offload enabled
Jan  3 10:42:09 kernel: raeth: HW VLAN TX offload enabled
Jan  3 10:42:09 kernel: raeth: HW Scatter/Gather TX offload enabled
Jan  3 10:42:09 kernel: raeth: HW TCP segmentation offload (TSO) enabled
Jan  3 10:42:09 kernel: mtk_esw - hw bridge: W|LLLL
Jan  3 10:42:09 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Jan  3 10:42:09 kernel: device eth2 entered promiscuous mode
Jan  3 10:42:10 kernel: br0: port 1(eth2) entered forwarding state
Jan  3 10:42:11 kernel: mtk_esw - software IGMP/MLD snooping: 1
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 12:48 | 显示全部楼层
探针不启用下载不到,发现是网盘的tzPHP文件中间少个点应该重命名tz.phpJan  3 12:36:19 【LNMP】: 重置 默认主页 数据完成。
Jan  3 12:36:19 【LNMP】: 找不到 tz.php, 下载程序文档, 需时1秒
Jan  3 12:36:19 【LNMP】: 下载地址:https://opt.cn2qq.com/opt-file/tz.php
Jan  3 12:36:21 【下载】: 下载失败:【/opt/wwwroot/default/tz.php】 URL:【https://opt.cn2qq.com/opt-file/tzphp
Jan  3 12:36:21 【下载】: 重新下载:【/opt/wwwroot/default/tz.php】 URL:【https://raw.githubusercontent.co ... t-file/master/tzphp
Jan  3 12:36:23 【下载】: 下载失败:【/opt/wwwroot/default/tz.php】 URL:【https://raw.githubusercontent.co ... t-file/master/tzphp
Jan  3 12:36:23 【下载】: no-check-certificate重新下载:【/opt/wwwroot/default/tz.php】 URL:【https://opt.cn2qq.com/opt-file/tzphp
Jan  3 12:36:24 【下载】: no-check-certificate下载失败:【/opt/wwwroot/default/tz.php】 URL:【https://opt.cn2qq.com/opt-file/tzphp
Jan  3 12:36:24 【下载】: no-check-certificate重新下载:【/opt/wwwroot/default/tz.php】 URL:【https://raw.githubusercontent.co ... t-file/master/tzphp
Jan  3 12:36:25 【下载】: no-check-certificate下载失败:【/opt/wwwroot/default/tz.php】 URL:【https://raw.githubusercontent.co ... t-file/master/tzphp
Jan  3 12:36:26 【LNMP】: 运行 nginx+php+mysql 环境
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 16:07 | 显示全部楼层
涼仝灀 发表于 2019-1-2 23:34
希望解决一下IPv6的问题,有时拨号连接后不能用,真是难受!

设置

在脚本区输命令利用网桥把IPV6的包透传到内网,让内网设备直接暴露在IPV6外网就行了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 16:50 | 显示全部楼层
123fzm 发表于 2019-1-3 16:07
在脚本区输命令利用网桥把IPV6的包透传到内网,让内网设备直接暴露在IPV6外网就行了

嗯,只希望尽早修复
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 19:00 | 显示全部楼层
非常感谢 谢谢
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-3 20:42 | 显示全部楼层
@hiboyhiboyhiboy 刷了2019-01-02的版本后,无线连接的设备名称全部变成bogon,有线连接的正常
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 18:38

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表