找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hiboyhiboyhiboy

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

   火... [复制链接]
发表于 2016-9-10 17:41 | 显示全部楼层
要是能设置一个星期自动重启一下就好了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 18:09 | 显示全部楼层
新版本SS的dns模式都不能用,只能用回老版里面的模式
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 19:29 | 显示全部楼层
Sep 10 19:26:18 kernel: usb 1-1: new high-speed USB device number 3 using ehci-platform
Sep 10 19:26:18 kernel: usb 1-1: New USB device found, idVendor=090c, idProduct=1000
Sep 10 19:26:18 kernel: usb 1-1: Product: USB DISK
Sep 10 19:26:18 kernel: usb 1-1: Manufacturer: SMI Corporation
Sep 10 19:26:18 kernel: scsi1 : usb-storage 1-1:1.0
Sep 10 19:26:30 kernel: scsi 1:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 4
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB)
Sep 10 19:26:30 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Write Protect is off
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] No Caching mode page found
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] No Caching mode page found
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Sep 10 19:26:30 kernel:  sda: unknown partition table
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] No Caching mode page found
Sep 10 19:26:30 usb_modeswitch: no rule for device 090c:1000
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Sep 10 19:26:30 kernel: sd 1:0:0:0: [sda] Attached SCSI removable disk
Sep 10 19:26:31 automount: /sbin/automount.sh sda    AiDisk_a1
Sep 10 19:26:31 automount: mount  device /dev/sda () to /media/AiDisk_a1 @@@@@ /media/AiDisk_a1
Sep 10 19:26:51 automount: /sbin/automount.sh sda    AiDisk_a1
Sep 10 19:26:51 automount: mount  device /dev/sda () to /media/AiDisk_a1 @@@@@ /media/AiDisk_a1
Sep 10 19:26:52 usb_modeswitch: no rule for device 090c:1000

挂不上u盘,5k的自带那种u盘
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 19:32 | 显示全部楼层
bigandy 发表于 2016-4-24 02:16
日积月累的固件使用教程

DDNS 的设置

dynu.com,我在我自己的路由上设置成功,可以更新IP,但断线再连接后他不自动更新,就算我点更新或者设置更新周期为10分钟,还是这样!还有一个问题就是这个动态域名可以添加几个域名的,我将另一台路由也是一样的设置,将添加的第二个域名设置到这台路由上,这台路由在我朋友家用,但IP更新时两个域名的IP都更新成我的IP,

点评

第二个问题我搞定了。http://www.right.com.cn/forum/forum.php?mod=redirect&goto=findpost&ptid=161324&pid=1474847  发表于 2016-10-14 21:50
我也发现这个问题!怎么处理的?  详情 回复 发表于 2016-10-8 00:44
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 20:04 | 显示全部楼层
大神 ss里面 GFW规则更新则使用路由内置规则 可否改下可以定义自己的gfwlist地址 因为有很多地址gfwlist并没有覆盖到 自定义自己的网址 一条一条的加又太麻烦 能不能考虑添加下 谢谢
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 20:55 | 显示全部楼层
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:20 | 显示全部楼层
搭建好Web环境后,刚开始一切正常,默认主页http://192.168.123.1:81和自己建立的论坛本地也能访问。然后路由器一重启或者断电后重新开,默认主页和论坛等等就无法访问了,求大神告诉怎么处理?谢谢啦        重启LNMP的信息:
Sep 10 22:19:39 【LNMP-mysqld】: stop

Sep 10 22:19:39 crond[8711]: crond (busybox 1.24.2) started, log level 8

Sep 10 22:19:40 【LNMP-php-fpm】: stop

Sep 10 22:19:41 【LNMP-nginx】: stop

Sep 10 22:19:41 【LNMP】: /opt 已用数据空间5%/100%

Sep 10 22:19:41 【LNMP】: /opt 已用节点空间0%/100%

Sep 10 22:19:41 【LNMP】: 以上两个数据如出现占用100%时,则opt空间或Inodes爆满,会影响LNMP运行,请重新正确格式化U盘。

Sep 10 22:19:41 【LNMP】: 运行 nginx+php+mysql 环境

Sep 10 22:19:42 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84

Sep 10 22:19:42 【LNMP】: wifidog_server:192.168.123.1:84

Sep 10 22:19:42 LNMP: start

Sep 10 22:19:42 【LNMP】: 初始化

Sep 10 22:19:42 【LNMP】: default路径:/opt/www/default 端口:81

Sep 10 22:19:42 【LNMP】: default :192.168.123.1:81

Sep 10 22:19:42 【LNMP】: phpmyadmin路径:/opt/www/phpmyadmin 端口:85

Sep 10 22:19:42 【LNMP】: phpmyadmin :192.168.123.1:85

Sep 10 22:19:42 【LNMP-mysqld】: restart

Sep 10 22:19:42 admin: Started mysqld from .

Sep 10 22:19:42 【LNMP-php-fpm】: restart

Sep 10 22:19:42 admin: Started php-fpm from .

Sep 10 22:19:42 【LNMP-nginx】: restart

Sep 10 22:19:42 admin: Started nginx from .

Sep 10 22:19:42 【LNMP】: /opt 已用数据空间5%/100%
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:21 | 显示全部楼层
搭建好Web环境后,刚开始一切正常,默认主页http://192.168.123.1:81和自己建立的论坛本地也能访问。然后路由器一重启或者断电后重新开,默认主页和论坛等等就无法访问了,求大神告诉怎么处理?谢谢啦        重启LNMP的信息:
Sep 10 22:19:39 【LNMP-mysqld】: stop

Sep 10 22:19:39 crond[8711]: crond (busybox 1.24.2) started, log level 8

Sep 10 22:19:40 【LNMP-php-fpm】: stop

Sep 10 22:19:41 【LNMP-nginx】: stop

Sep 10 22:19:41 【LNMP】: /opt 已用数据空间5%/100%

Sep 10 22:19:41 【LNMP】: /opt 已用节点空间0%/100%

Sep 10 22:19:41 【LNMP】: 以上两个数据如出现占用100%时,则opt空间或Inodes爆满,会影响LNMP运行,请重新正确格式化U盘。

Sep 10 22:19:41 【LNMP】: 运行 nginx+php+mysql 环境

Sep 10 22:19:42 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84

Sep 10 22:19:42 【LNMP】: wifidog_server:192.168.123.1:84

Sep 10 22:19:42 LNMP: start

Sep 10 22:19:42 【LNMP】: 初始化

Sep 10 22:19:42 【LNMP】: default路径:/opt/www/default 端口:81

Sep 10 22:19:42 【LNMP】: default :192.168.123.1:81

Sep 10 22:19:42 【LNMP】: phpmyadmin路径:/opt/www/phpmyadmin 端口:85

Sep 10 22:19:42 【LNMP】: phpmyadmin :192.168.123.1:85

Sep 10 22:19:42 【LNMP-mysqld】: restart

Sep 10 22:19:42 admin: Started mysqld from .

Sep 10 22:19:42 【LNMP-php-fpm】: restart

Sep 10 22:19:42 admin: Started php-fpm from .

Sep 10 22:19:42 【LNMP-nginx】: restart

Sep 10 22:19:42 admin: Started nginx from .

Sep 10 22:19:42 【LNMP】: /opt 已用数据空间5%/100%
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:21 | 显示全部楼层
搭建好Web环境后,刚开始一切正常,默认主页http://192.168.123.1:81和自己建立的论坛本地也能访问。然后路由器一重启或者断电后重新开,默认主页和论坛等等就无法访问了,求大神告诉怎么处理?谢谢啦        重启LNMP的信息:
Sep 10 22:19:39 【LNMP-mysqld】: stop

Sep 10 22:19:39 crond[8711]: crond (busybox 1.24.2) started, log level 8

Sep 10 22:19:40 【LNMP-php-fpm】: stop

Sep 10 22:19:41 【LNMP-nginx】: stop

Sep 10 22:19:41 【LNMP】: /opt 已用数据空间5%/100%

Sep 10 22:19:41 【LNMP】: /opt 已用节点空间0%/100%

Sep 10 22:19:41 【LNMP】: 以上两个数据如出现占用100%时,则opt空间或Inodes爆满,会影响LNMP运行,请重新正确格式化U盘。

Sep 10 22:19:41 【LNMP】: 运行 nginx+php+mysql 环境

Sep 10 22:19:42 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84

Sep 10 22:19:42 【LNMP】: wifidog_server:192.168.123.1:84

Sep 10 22:19:42 LNMP: start

Sep 10 22:19:42 【LNMP】: 初始化

Sep 10 22:19:42 【LNMP】: default路径:/opt/www/default 端口:81

Sep 10 22:19:42 【LNMP】: default :192.168.123.1:81

Sep 10 22:19:42 【LNMP】: phpmyadmin路径:/opt/www/phpmyadmin 端口:85

Sep 10 22:19:42 【LNMP】: phpmyadmin :192.168.123.1:85

Sep 10 22:19:42 【LNMP-mysqld】: restart

Sep 10 22:19:42 admin: Started mysqld from .

Sep 10 22:19:42 【LNMP-php-fpm】: restart

Sep 10 22:19:42 admin: Started php-fpm from .

Sep 10 22:19:42 【LNMP-nginx】: restart

Sep 10 22:19:42 admin: Started nginx from .

Sep 10 22:19:42 【LNMP】: /opt 已用数据空间5%/100%
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:21 | 显示全部楼层
搭建好Web环境后,刚开始一切正常,默认主页http://192.168.123.1:81和自己建立的论坛本地也能访问。然后路由器一重启或者断电后重新开,默认主页和论坛等等就无法访问了,求大神告诉怎么处理?谢谢啦        重启LNMP的信息:
Sep 10 22:19:39 【LNMP-mysqld】: stop

Sep 10 22:19:39 crond[8711]: crond (busybox 1.24.2) started, log level 8

Sep 10 22:19:40 【LNMP-php-fpm】: stop

Sep 10 22:19:41 【LNMP-nginx】: stop

Sep 10 22:19:41 【LNMP】: /opt 已用数据空间5%/100%

Sep 10 22:19:41 【LNMP】: /opt 已用节点空间0%/100%

Sep 10 22:19:41 【LNMP】: 以上两个数据如出现占用100%时,则opt空间或Inodes爆满,会影响LNMP运行,请重新正确格式化U盘。

Sep 10 22:19:41 【LNMP】: 运行 nginx+php+mysql 环境

Sep 10 22:19:42 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84

Sep 10 22:19:42 【LNMP】: wifidog_server:192.168.123.1:84

Sep 10 22:19:42 LNMP: start

Sep 10 22:19:42 【LNMP】: 初始化

Sep 10 22:19:42 【LNMP】: default路径:/opt/www/default 端口:81

Sep 10 22:19:42 【LNMP】: default :192.168.123.1:81

Sep 10 22:19:42 【LNMP】: phpmyadmin路径:/opt/www/phpmyadmin 端口:85

Sep 10 22:19:42 【LNMP】: phpmyadmin :192.168.123.1:85

Sep 10 22:19:42 【LNMP-mysqld】: restart

Sep 10 22:19:42 admin: Started mysqld from .

Sep 10 22:19:42 【LNMP-php-fpm】: restart

Sep 10 22:19:42 admin: Started php-fpm from .

Sep 10 22:19:42 【LNMP-nginx】: restart

Sep 10 22:19:42 admin: Started nginx from .

Sep 10 22:19:42 【LNMP】: /opt 已用数据空间5%/100%
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:31 | 显示全部楼层
学习了!!!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:50 | 显示全部楼层
请问有谁知道如何实现直接将内网IP(例如192.168.1.144)映射到外网IP(自己的VPS的IP)的么
路由端是内网IP,这地址是一台台网络打印机,但是驱动程序不认网络地址。。只认IP地址
总之就是想实现远程用户访问VPS的公网IP获取到内网ip(192.168.1.144)的通讯
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:53 | 显示全部楼层
你好,我的是极路由3,刷了【RT-AC1200HP-GPIO-12-JI3-128M,极路由-极三(HC5861),复位键GPIO#12,16M闪存,128M内存,2.4/5GWi-Fi,USB、LAN一个千兆口】,WAN口PPPOE拨号上网失败,账号密码确保是正确的,等了很久始终拨号失败,但通过自动获取IP是可以正常上网的。
我根据配置和复位键相同的原则,于是我尝试刷了【RT-N14U_GPIO_12_xiaodu_ji1S_128M        小度路由/极路由-极壹S(HC5661),复位键GPIO#12,16M闪存,128M内存,2.4GWi-Fi,USB,SD卡】,这个固件刷完WAN口PPPOE拨号上网正常了,但是这款固件只有2.4G的WiFi,不支持5GWiFi,极路由3是支持5G的。
我下载了7月、8月、9月的RT-AC1200HP-GPIO-12-JI3-128M,极路由-极三(HC5861)固件包,全部都刷了,WAN口PPPOE拨号上网始终失败,麻烦LZ花点时间,看看是哪里出问题了,帮忙修复下,谢谢了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-10 22:54 | 显示全部楼层
你好,我的是极路由3,刷了【RT-AC1200HP-GPIO-12-JI3-128M,极路由-极三(HC5861),复位键GPIO#12,16M闪存,128M内存,2.4/5GWi-Fi,USB、LAN一个千兆口】,WAN口PPPOE拨号上网失败,账号密码确保是正确的,等了很久始终拨号失败,但通过自动获取IP是可以正常上网的。
我根据配置和复位键相同的原则,于是我尝试刷了【RT-N14U_GPIO_12_xiaodu_ji1S_128M        小度路由/极路由-极壹S(HC5661),复位键GPIO#12,16M闪存,128M内存,2.4GWi-Fi,USB,SD卡】,这个固件刷完WAN口PPPOE拨号上网正常了,但是这款固件只有2.4G的WiFi,不支持5GWiFi,极路由3是支持5G的。
我下载了7月、8月、9月的RT-AC1200HP-GPIO-12-JI3-128M,极路由-极三(HC5861)固件包,全部都刷了,WAN口PPPOE拨号上网始终失败,麻烦LZ花点时间,看看是哪里出问题了,帮忙修复下,谢谢了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-9-11 00:18 | 显示全部楼层
大神,反馈一个bug:

s-s - 基本配置 - s-s 开关  《开》,s-s - SSR Server - ssr-server 开关《开》-----测试结果,开机运行SSR服务器。

s-s - 基本配置 - s-s 开关  《关》,s-s - SSR Server - ssr-server 开关《开》-----测试结果,开机不能运行SSR服务器。

点评

没有把,一直以来都一切正常。  详情 回复 发表于 2016-9-11 08:02
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-23 17:42

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表