|
刷了open wrt以后安装了USB内核以及其他相关的IPK,但是发现USB口根本不通电,也不是识别……
什么情况?
系统日志如下
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 4.683578] UBI: auto-attach mtd13
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 4.686977] UBI: attaching mtd13 to ubi0
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.520119] UBI: scanning is finished
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.543545] UBI: attached mtd13 (name "ubi", size 120 MiB) to ubi0
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.549725] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.556510] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.563189] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.570033] UBI: good PEBs: 961, bad PEBs: 3, corrupted PEBs: 0
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.575933] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.583044] UBI: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 770082983
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.591967] UBI: available PEBs: 0, total reserved PEBs: 961, PEBs reserved for bad PEB handling: 17
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.601107] UBI: background thread "ubi_bgt0d" started, PID 288
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.608209] UBI: ubiblock0_0 created from ubi0:0(rootfs)
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 6.613532] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- Thu May 14 22:08:40 2015 kern.info kernel: [ 6.628431] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- Thu May 14 22:08:40 2015 kern.info kernel: [ 6.635843] Freeing unused kernel memory: 180K (c03a1000 - c03ce000)
- Thu May 14 22:08:40 2015 user.err kernel: [ 7.232585] init: failed to symlink /tmp -> /var
- Thu May 14 22:08:40 2015 user.info kernel: [ 7.237390] init: Console is alive
- Thu May 14 22:08:40 2015 user.info kernel: [ 7.241017] init: - watchdog -
- Thu May 14 22:08:40 2015 kern.warn kernel: [ 7.244490] External imprecise Data abort at addr=0xb6fa4068, fsr=0x1c06 ignored.
- Thu May 14 22:08:40 2015 kern.info kernel: [ 7.932475] usbcore: registered new interface driver usbfs
- Thu May 14 22:08:40 2015 kern.info kernel: [ 7.938062] usbcore: registered new interface driver hub
- Thu May 14 22:08:40 2015 kern.info kernel: [ 7.943496] usbcore: registered new device driver usb
- Thu May 14 22:08:40 2015 user.info kernel: [ 8.263553] init: - preinit -
- Thu May 14 22:08:40 2015 kern.info kernel: [ 9.490153] eth0: Link is Up - 1Gbps/Full - flow control off
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 11.675489] UBIFS: background thread "ubifs_bgt0_1" started, PID 363
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 11.780557] UBIFS: recovery needed
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 11.984065] UBIFS: recovery completed
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 11.987823] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 11.994273] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 12.003390] UBIFS: FS size: 115167232 bytes (109 MiB, 907 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 12.013187] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 12.018999] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 03C63390-E292-4999-BA34-4F32F1739262, small LPT model
- Thu May 14 22:08:40 2015 user.info kernel: [ 12.049899] mount_root: loading kmods from internal overlay
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.673089] exFAT: Version 1.2.9
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 12.926215] SCSI subsystem initialized
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.952370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.959703] ehci-platform: EHCI generic platform driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.965130] ehci-platform ehci-platform.0: EHCI Host Controller
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.971079] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
- Thu May 14 22:08:40 2015 kern.info kernel: [ 12.979301] ehci-platform ehci-platform.0: irq 111, io mem 0x18021000
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.000162] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.007309] hub 1-0:1.0: USB hub found
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.011215] hub 1-0:1.0: 2 ports detected
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.024598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.031675] ohci-platform: OHCI generic platform driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.045011] uhci_hcd: USB Universal Host Controller Interface driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 13.099357] usbcore: registered new interface driver usb-storage
- Thu May 14 22:08:40 2015 user.info kernel: [ 13.520863] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- Thu May 14 22:08:40 2015 user.info kernel: [ 13.535081] block: extroot: not configured
- Thu May 14 22:08:40 2015 user.info kernel: [ 13.562433] mount_root: switching to jffs2 overlay
- Thu May 14 22:08:40 2015 user.info kernel: [ 13.595879] procd: - early -
- Thu May 14 22:08:40 2015 user.info kernel: [ 13.598873] procd: - watchdog -
- Thu May 14 22:08:40 2015 user.info kernel: [ 14.258241] procd: - ubus -
- Thu May 14 22:08:40 2015 user.info kernel: [ 15.281054] procd: - init -
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.130676] NET: Registered protocol family 10
- Thu May 14 22:08:40 2015 kern.notice kernel: [ 20.160912] FS-Cache: Loaded
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.277204] ntfs: driver 2.1.31 [Flags: R/O MODULE].
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.312807] ip6_tables: (C) 2000-2006 Netfilter Core Team
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.337419] i2c /dev entries driver
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.384931] Linux video capture interface: v2.00
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.418949] u32 classifier
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.421726] input device check on
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.425369] Actions configured
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.431138] Mirror/redirect action on
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.440929] nf_conntrack version 0.5.0 (3995 buckets, 15980 max)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.480106] fuse init (API version 7.23)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.490627] Loading modules backported from Linux version master-2015-03-09-0-g141f155
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.498518] Backport generated by backports.git backports-20150129-0-gdd4a670
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.519074] ip_tables: (C) 2000-2006 Netfilter Core Team
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.616091] usbcore: registered new interface driver uvcvideo
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.621876] USB Video Class driver (1.1.1)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.652490] xt_time: kernel timezone is -0000
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.667587] cfg80211: Calling CRDA to update world regulatory domain
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.674288] cfg80211: World regulatory domain updated:
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.679457] cfg80211: DFS Master region: unset
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.683857] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.693621] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.701608] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.709582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.717566] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.725547] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.734988] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.743053] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.751033] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.782797] PPP generic driver version 2.4.2
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.789047] NET: Registered protocol family 24
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.802241] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
- Thu May 14 22:08:40 2015 kern.debug kernel: [ 20.808394] bcma: bus1: Switched to core: 0x812
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.823339] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.829499] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.853466] b43-phy1: Broadcom 4360 WLAN found (core revision 42)
- Thu May 14 22:08:40 2015 kern.debug kernel: [ 20.859538] bcma: bus2: Switched to core: 0x812
- Thu May 14 22:08:40 2015 kern.err kernel: [ 20.880241] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
- Thu May 14 22:08:40 2015 kern.warn kernel: [ 20.888279] b43: probe of bcma2:1 failed with error -95
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.893756] Broadcom 43xx driver loaded [ Features: PNL ]
- Thu May 14 22:08:40 2015 kern.info kernel: [ 20.905042] usbcore: registered new interface driver brcmfmac
- Thu May 14 22:08:40 2015 kern.debug kernel: [ 20.936787] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- Thu May 14 22:08:41 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
- Thu May 14 22:08:41 2015 user.emerg syslog: 'radio0' is disabled
- Thu May 14 22:08:41 2015 user.emerg syslog: 'radio0' is disabled
复制代码
以下是内核日志
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.18.11 (openwrt@gb-11) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r45686) ) #1 SMP Thu May 14 13:29:06 UTC 2015
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Netgear R6300 V2 (BCM4708)
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 65536
- [ 0.000000] free_area_init_node: node 0, pgdat c03d3640, node_mem_map c6df8000
- [ 0.000000] Normal zone: 256 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] HighMem zone: 4352 pages used for memmap
- [ 0.000000] HighMem zone: 32768 pages, LIFO batch:7
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c6dd4000 s5952 r8192 d22720 u36864
- [ 0.000000] pcpu-alloc: s5952 r8192 d22720 u36864 alloc=9*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
- [ 0.000000] Kernel command line: console=ttyS0,115200
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 255560K/262144K available (2894K kernel code, 107K rwdata, 788K rodata, 180K init, 276K bss, 6584K reserved, 131072K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc03a0dcc (3684 kB)
- [ 0.000000] .init : 0xc03a1000 - 0xc03ce000 ( 180 kB)
- [ 0.000000] .data : 0xc03ce000 - 0xc03e8c78 ( 108 kB)
- [ 0.000000] .bss : 0xc03e8c78 - 0xc042ddcc ( 277 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] L2C: platform modifies aux control register: 0x0a130000 -> 0x7a530001
- [ 0.000000] L2C: platform provided aux values permit register corruption.
- [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530001
- [ 0.000000] L2C-310 erratum 769419 enabled
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
- [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
- [ 0.000015] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 2748779069440ns
- [ 0.000305] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
- [ 0.090119] pid_max: default: 32768 minimum: 301
- [ 0.090290] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090303] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090837] CPU: Testing write buffer coherency: ok
- [ 0.091100] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.091223] Setting up static identity map for 0x11a60 - 0x11a94
- [ 0.093222] CPU1: Booted secondary processor
- [ 0.130110] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.130201] Brought up 2 CPUs
- [ 0.130226] SMP: Total of 2 processors activated (3188.32 BogoMIPS).
- [ 0.130237] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
- [ 0.130243] CPU: This may indicate a broken bootloader or firmware.
- [ 0.137778] NET: Registered protocol family 16
- [ 0.138565] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.192565] Switched to clocksource arm_global_timer
- [ 0.193858] NET: Registered protocol family 2
- [ 0.194766] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.194799] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.194827] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.194911] TCP: reno registered
- [ 0.194931] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.194975] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.195279] NET: Registered protocol family 1
- [ 0.195345] PCI: CLS 0 bytes, default 64
- [ 0.196395] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.197547] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.197573] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.197809] msgmni has been set to 243
- [ 0.198357] bounce: pool size: 64 pages
- [ 0.198380] io scheduler noop registered
- [ 0.198396] io scheduler deadline registered (default)
- [ 0.198783] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.201059] console [ttyS0] disabled
- [ 0.201120] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550
- [ 0.637202] console [ttyS0] enabled
- [ 0.641113] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 6250000) is a 16550
- [ 0.651611] libphy: Fixed MDIO Bus: probed
- [ 0.655775] bgmac: Broadcom 47xx GBit MAC driver loaded
- [ 0.661244] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02
- [ 0.668256] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
- [ 0.676834] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.676849] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
- [ 0.685585] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.685598] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
- [ 0.693553] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0)
- [ 0.701944] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0)
- [ 0.710331] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0)
- [ 0.718711] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0)
- [ 0.727059] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
- [ 0.735602] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
- [ 0.744163] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.744176] bcma: bus0: Core 9 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
- [ 0.754111] bcma: bus0: Core 10 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
- [ 0.762492] bcma: bus0: Core 11 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
- [ 0.770883] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.770895] bcma: bus0: Core 12 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
- [ 0.779110] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.779123] bcma: bus0: Core 13 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
- [ 0.788468] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.788481] bcma: bus0: Core 14 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
- [ 0.799207] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.799220] bcma: bus0: Core 15 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
- [ 0.807260] bcma: bus0: Core 16 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
- [ 0.816857] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.816869] bcma: bus0: Core 17 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
- [ 0.840151] bcm_nand bcma0:16: NAND Controller rev 6.01
- [ 0.870184] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
- [ 0.876507] nand: Samsung NAND 128MiB 3,3V 8-bit
- [ 0.881120] nand: 128MiB, SLC, page size: 2048, OOB size: 64
- [ 2.177461] random: nonblocking pool is initialized
- [ 2.485486] 14 bcm47xxpart partitions found on MTD device bcm_nand
- [ 2.491646] Creating 14 MTD partitions on "bcm_nand":
- [ 2.496677] 0x000000000000-0x000000080000 : "boot"
- [ 2.503637] 0x000000080000-0x000000200000 : "nvram"
- [ 2.513271] 0x000000200000-0x000000220000 : "board_data"
- [ 2.519644] 0x000000220000-0x000000240000 : "POT"
- [ 2.525437] 0x000000240000-0x0000002c0000 : "POT"
- [ 2.532250] 0x0000002c0000-0x0000002e0000 : "ML"
- [ 2.537971] 0x0000002e0000-0x000000300000 : "ML"
- [ 2.543713] 0x000000300000-0x000000320000 : "ML"
- [ 2.549417] 0x000000320000-0x000000340000 : "ML"
- [ 2.555181] 0x000000340000-0x000000360000 : "ML"
- [ 2.560908] 0x000000360000-0x000000380000 : "ML"
- [ 2.566587] 0x000000380000-0x000008000000 : "firmware"
- [ 2.904152] 0x00000038001c-0x000000780000 : "linux"
- [ 2.920509] 0x000000780000-0x000008000000 : "ubi"
- [ 3.247990] bcm53xxspiflash spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
- [ 3.255311] bcm53xxspiflash: probe of spi32766.0 failed with error -2
- [ 3.358703] bcma: bus0: Using SPROM revision 8 provided by platform.
- [ 3.359027] bgmac bcma0:3: Found PHY addr: 30 (NOREGS)
- [ 3.364942] bgmac bcma0:3: Support for Roboswitch not implemented
- [ 3.372642] b53_common: found switch: BCM53011, rev 2
- [ 3.378503] bgmac bcma0:4: Found PHY addr: 0
- [ 3.384599] bgmac: Timeout waiting for reg 0x180
- [ 3.389207] bgmac bcma0:4: Writing to PHY 0 register 0x0 failed
- [ 3.396248] bgmac: Timeout waiting for reg 0x180
- [ 3.400864] bgmac bcma0:4: Reading PHY 0 register 0x0 failed
- [ 3.406498] bgmac bcma0:4: PHY reset failed
- [ 3.410673] bgmac bcma0:4: Support for Roboswitch not implemented
- [ 3.417867] bgmac bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
- [ 3.423738] bgmac bcma0:5: Using random MAC: c2:5d:fc:70:60:8a
- [ 3.429603] bgmac bcma0:5: Found PHY addr: 0
- [ 3.435651] bgmac: Timeout waiting for reg 0x180
- [ 3.440278] bgmac bcma0:5: Writing to PHY 0 register 0x0 failed
- [ 3.447302] bgmac: Timeout waiting for reg 0x180
- [ 3.451907] bgmac bcma0:5: Reading PHY 0 register 0x0 failed
- [ 3.457535] bgmac bcma0:5: PHY reset failed
- [ 3.461709] bgmac bcma0:5: Support for Roboswitch not implemented
- [ 3.468883] bgmac: Unsupported core_unit 3
- [ 3.473032] bgmac: probe of bcma0:6 failed with error -524
- [ 3.478602] pci_host_bcm5301x bcma0:7: initializing PCIe controller
- [ 3.760133] pci_host_bcm5301x bcma0:7: link: UP
- [ 3.764781] pci_host_bcm5301x bcma0:7: PCI host bridge to bus 0000:00
- [ 3.771226] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
- [ 3.778073] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 3.783631] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 3.791562] pci 0000:00:00.0: [14e4:8011] type 01 class 0x020000
- [ 3.791628] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 3.791840] PCI: bus0: Fast back to back transfers disabled
- [ 3.797547] pci 0000:01:00.0: [14e4:4331] type 00 class 0x028000
- [ 3.797591] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
- [ 3.797702] pci 0000:01:00.0: supports D1 D2
- [ 3.797887] PCI: bus1: Fast back to back transfers disabled
- [ 3.803466] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 3.803485] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
- [ 3.803597] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
- [ 3.810380] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
- [ 3.817673] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.822637] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
- [ 3.829569] pci_host_bcm5301x bcma0:8: initializing PCIe controller
- [ 4.110131] pci_host_bcm5301x bcma0:8: link: UP
- [ 4.114791] pci_host_bcm5301x bcma0:8: PCI host bridge to bus 0001:00
- [ 4.121238] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
- [ 4.128087] pci_bus 0001:00: root bus resource [io 0x0000]
- [ 4.133645] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 4.141557] pci 0001:00:00.0: [14e4:8011] type 01 class 0x020000
- [ 4.141617] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- [ 4.141818] PCI: bus0: Fast back to back transfers disabled
- [ 4.147532] pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
- [ 4.147574] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- [ 4.147675] pci 0001:01:00.0: supports D1 D2
- [ 4.147858] PCI: bus1: Fast back to back transfers disabled
- [ 4.153437] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
- [ 4.153457] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
- [ 4.153623] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
- [ 4.160404] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
- [ 4.167696] pci 0001:00:00.0: PCI bridge to [bus 01]
- [ 4.172660] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
- [ 4.180711] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
- [ 4.189648] bcma: bus0: Bus registered
- [ 4.193573] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
- [ 4.200308] bcma: bus1: Found chip with id 0x4331, rev 0x02 and package 0x08
- [ 4.207349] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
- [ 4.215866] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
- [ 4.224480] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
- [ 4.232528] bcma: bus1: Found rev 10 PMU (capabilities 0x108C260A)
- [ 4.232544] bcma: bus1: SPROM offset 0x800
- [ 4.356314] bcma: bus1: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
- [ 4.464343] bcma: bus1: Using SPROM revision 9 provided by platform.
- [ 4.464367] bcma: bus1: PMU resource config unknown or not needed for device 0x4331
- [ 4.510345] bcma: bus1: Bus registered
- [ 4.514156] bcma-pci-bridge 0001:01:00.0: enabling device (0140 -> 0142)
- [ 4.520885] bcma: bus2: Found chip with id 0x4360, rev 0x03 and package 0x01
- [ 4.527929] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
- [ 4.536438] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
- [ 4.545051] bcma: bus2: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
- [ 4.553312] bcma: bus2: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
- [ 4.561730] bcma: bus2: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
- [ 4.570619] bcma: bus2: Found rev 17 PMU (capabilities 0x10A22B11)
- [ 4.570629] bcma: bus2: SPROM offset 0x800
- [ 4.602056] bcma: bus2: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
- [ 4.617668] Unsupported SPROM revision 11 detected. Will extract v1
- [ 4.624543] can not parse nvram name pci/2/1/boardflags(null) with value 0x30000000 got -34
- [ 4.640971] bcma: bus2: Using SPROM revision 1 provided by platform.
- [ 4.640989] bcma: bus2: PMU resource config unknown or not needed for device 0x4360
- [ 4.642991] bcma: bus2: Workarounds unknown or not needed for device 0x4360
- [ 4.643004] bcma: bus2: Switched to core: 0x83C
- [ 4.643374] bcma: bus2: Bus registered
- [ 4.647484] TCP: cubic registered
- [ 4.650837] NET: Registered protocol family 17
- [ 4.655365] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 4.667965] Bridge firewalling registered
- [ 4.671973] 8021q: 802.1Q VLAN Support v1.8
- [ 4.676220] Registering SWP/SWPB emulation handler
- [ 4.683578] UBI: auto-attach mtd13
- [ 4.686977] UBI: attaching mtd13 to ubi0
- [ 6.520119] UBI: scanning is finished
- [ 6.543545] UBI: attached mtd13 (name "ubi", size 120 MiB) to ubi0
- [ 6.549725] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 6.556510] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 6.563189] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 6.570033] UBI: good PEBs: 961, bad PEBs: 3, corrupted PEBs: 0
- [ 6.575933] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 6.583044] UBI: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 770082983
- [ 6.591967] UBI: available PEBs: 0, total reserved PEBs: 961, PEBs reserved for bad PEB handling: 17
- [ 6.601107] UBI: background thread "ubi_bgt0d" started, PID 288
- [ 6.608209] UBI: ubiblock0_0 created from ubi0:0(rootfs)
- [ 6.613532] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 6.628431] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 6.635843] Freeing unused kernel memory: 180K (c03a1000 - c03ce000)
- [ 7.232585] init: failed to symlink /tmp -> /var
- [ 7.237390] init: Console is alive
- [ 7.241017] init: - watchdog -
- [ 7.244490] External imprecise Data abort at addr=0xb6fa4068, fsr=0x1c06 ignored.
- [ 7.932475] usbcore: registered new interface driver usbfs
- [ 7.938062] usbcore: registered new interface driver hub
- [ 7.943496] usbcore: registered new device driver usb
- [ 8.263553] init: - preinit -
- [ 9.490153] eth0: Link is Up - 1Gbps/Full - flow control off
- [ 11.675489] UBIFS: background thread "ubifs_bgt0_1" started, PID 363
- [ 11.780557] UBIFS: recovery needed
- [ 11.984065] UBIFS: recovery completed
- [ 11.987823] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 11.994273] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 12.003390] UBIFS: FS size: 115167232 bytes (109 MiB, 907 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
- [ 12.013187] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
- [ 12.018999] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 03C63390-E292-4999-BA34-4F32F1739262, small LPT model
- [ 12.049899] mount_root: loading kmods from internal overlay
- [ 12.673089] exFAT: Version 1.2.9
- [ 12.926215] SCSI subsystem initialized
- [ 12.952370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 12.959703] ehci-platform: EHCI generic platform driver
- [ 12.965130] ehci-platform ehci-platform.0: EHCI Host Controller
- [ 12.971079] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
- [ 12.979301] ehci-platform ehci-platform.0: irq 111, io mem 0x18021000
- [ 13.000162] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
- [ 13.007309] hub 1-0:1.0: USB hub found
- [ 13.011215] hub 1-0:1.0: 2 ports detected
- [ 13.024598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 13.031675] ohci-platform: OHCI generic platform driver
- [ 13.045011] uhci_hcd: USB Universal Host Controller Interface driver
- [ 13.099357] usbcore: registered new interface driver usb-storage
- [ 13.520863] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- [ 13.535081] block: extroot: not configured
- [ 13.562433] mount_root: switching to jffs2 overlay
- [ 13.595879] procd: - early -
- [ 13.598873] procd: - watchdog -
- [ 14.258241] procd: - ubus -
- [ 15.281054] procd: - init -
- [ 20.130676] NET: Registered protocol family 10
- [ 20.160912] FS-Cache: Loaded
- [ 20.277204] ntfs: driver 2.1.31 [Flags: R/O MODULE].
- [ 20.312807] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 20.337419] i2c /dev entries driver
- [ 20.384931] Linux video capture interface: v2.00
- [ 20.418949] u32 classifier
- [ 20.421726] input device check on
- [ 20.425369] Actions configured
- [ 20.431138] Mirror/redirect action on
- [ 20.440929] nf_conntrack version 0.5.0 (3995 buckets, 15980 max)
- [ 20.480106] fuse init (API version 7.23)
- [ 20.490627] Loading modules backported from Linux version master-2015-03-09-0-g141f155
- [ 20.498518] Backport generated by backports.git backports-20150129-0-gdd4a670
- [ 20.519074] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 20.616091] usbcore: registered new interface driver uvcvideo
- [ 20.621876] USB Video Class driver (1.1.1)
- [ 20.652490] xt_time: kernel timezone is -0000
- [ 20.667587] cfg80211: Calling CRDA to update world regulatory domain
- [ 20.674288] cfg80211: World regulatory domain updated:
- [ 20.679457] cfg80211: DFS Master region: unset
- [ 20.683857] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 20.693621] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.701608] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.709582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.717566] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.725547] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 20.734988] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 20.743053] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.751033] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 20.782797] PPP generic driver version 2.4.2
- [ 20.789047] NET: Registered protocol family 24
- [ 20.802241] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
- [ 20.808394] bcma: bus1: Switched to core: 0x812
- [ 20.823339] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
- [ 20.829499] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
- [ 20.853466] b43-phy1: Broadcom 4360 WLAN found (core revision 42)
- [ 20.859538] bcma: bus2: Switched to core: 0x812
- [ 20.880241] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
- [ 20.888279] b43: probe of bcma2:1 failed with error -95
- [ 20.893756] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 20.905042] usbcore: registered new interface driver brcmfmac
- [ 20.936787] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 24.206939] device eth0.1 entered promiscuous mode
- [ 24.211842] device eth0 entered promiscuous mode
- [ 24.219069] br-lan: port 1(eth0.1) entered forwarding state
- [ 24.224759] br-lan: port 1(eth0.1) entered forwarding state
- [ 24.500274] eth0: Link is Up - 1Gbps/Full - flow control off
- [ 26.220174] br-lan: port 1(eth0.1) entered forwarding state
复制代码
|
|