搞不懂了,8230-4升级128M内存的疑问,请懂的朋友说说

xiejn

我把我的8230-4 升级内存,2片64M的,HYNIX HY5DU121622CTP-J ,DDR333的,在升级好128M内存后,在TTL线下已经是64M,并可以启动.但是刷了论坛上下的300N V1的CFE后不能启动,在TTL线可以看到如下,清了NVRAM也一样,最讨厌的是居然网关还是192.168.2.1,还可以进原先8230-4的界面,只是BOOT这行有原先的2.01.08,变成CFE开头的数字

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Jun  1 10:37:58 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.

No DPN
This is a Parallel Flash
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 003F7FFF  (3899364)
nvram   #03   003F8000 -> 003FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 003F7FFF  (3899392)
nvram   #02   003F8000 -> 003FFFFF  (32768)
adm_attach: got 2 as adm_eecsadm_attach: got 3 as adm_eeskadm_attach: got 4 as adm_eediet0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.80.17.0
adm_attach: got 2 as adm_eecsadm_attach: got 3 as adm_eeskadm_attach: got 4 as adm_eediet1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.80.17.0
CPU type 0x29006: 264MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80300000 - 0x803A5880 (678016)
Initialized Data:          0x8033AE80 - 0x8033DBE0 (11616)
BSS Area:                  0x8033DBE0 - 0x8033F880 (7328)
Local Heap:                0x8033F880 - 0x803A3880 (409600)
Stack Area:                0x803A3880 - 0x803A5880 (8192)
Text (code) segment:       0x80300000 - 0x8033AE80 (241280)
Boot area (physical):      0x003A6000 - 0x003E6000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v3.9
The boot is CFE

mac_init(): Find mac [00:18:39:B2:4D:B6] in location 0
Nothing...

No eou key find
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0:  hwaddr 00-18-39-B2-4D-B6, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x2F2000     (3088384)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x9BC54      (638036)        (0xBC0DBC54)
  Offset2: 0x0  (0)     (0xBC040000)
  Header CRC:    0xD84AAFC6
  Calculate CRC: 0xD84AAFC6
Image 1 is OK
Try to load image 1.
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: ..... 1490944 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (richard@compile-server) (gcc version 3.2.3 with Broadcom modifications) #31 Mon Jan 10 14:35:41 CST 2005
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4704 rev 8 at 264 MHz
Calibrating delay loop... 263.78 BogoMIPS
Memory: 63144k/65536k available (1266k kernel code, 2392k reserved, 108k data, 64k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Enabling CardBus
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 879
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x003c0000 : "linux"
0x000dbc54-0x003c0000 : "rootfs"
0x003c0000-0x003e0000 : "profile"
0x003e0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
upgrade_wireless_nvram(): This firmware support Airgo card
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/led/led.o
Using /lib/modules/2.4.20/kernel/drivers/net/askey/airgo/ccd.o
Using /lib/modules/2.4.20/kernel/drivers/net/askey/airgo/wns_mod.o
Using /lib/modules/2.4.20/kernel/drivers/net/askey/airgo/pol_nosdram.o
insmod: init_module: pol_nosdram: No such device
Hit enter to continue...eth2: No such device
wlconf: No such file or directory
eth2: No such device
killall: iappd: no process killed
iappd: No such file or directory
find_pid_by_name(): 0
start_lan(): pid_count(0), pid(268493472) ,name(ani8021x_aa)
start_lan(): The first time to execute wsm and ani8021x_aa
Applied commit-all global settings
nas: No such file or directory
info, Moreton Bay DHCP Server (v0.9.5) started
===wan_ifname=eth1, ifname=eth1
killall: upnp: no process killed
Hit enter to continue...info, Moreton Bay DHCP Client (v0.9.5) started
nas: No such file or directory
Hit enter to continue...info, sending OFFER of 192.168.2.2
info, sending ACK to 192.168.2.2
parentC_interface: Failed to connect to parentC socket