设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备软件相关板块 › OPENWRT专版 › 求教我的如意云1 wifi为什么不稳定
广告投放联系QQ68610888
返回列表 发新帖
查看: 4088|回复: 3

求教我的如意云1 wifi为什么不稳定

[复制链接]
发表于 2015-8-25 18:31 | 显示全部楼层 |阅读模式
机子 刚开机没5分钟把   之前就是不稳定了才重新开的机
  1. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  2. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  3. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  4. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  5. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  6. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  7. Tue Aug 25 00:39:29 2015 kern.info kernel: [   31.150000] eth0: port 5 link up (10Mbps/Half duplex)
  8. Tue Aug 25 00:39:29 2015 kern.info kernel: [   31.170000] eth0: port 5 link down
  9. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  10. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  11. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  12. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  13. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=100 DUPLEX=0
  14. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  15. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  16. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  17. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  18. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  19. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  20. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  21. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  22. Tue Aug 25 00:39:29 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  23. Tue Aug 25 00:39:30 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  24. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.600000] PandoraBox RT2860v2 Smart Channel Sniffer started.
  25. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.600000] ===============================================================
  26. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.610000] Scanned BSSID list:
  27. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.610000]         ch1 bssid:ec:88:8f:77:bb:42
  28. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.620000]         ch1 bssid:78:eb:14:8c:19:d2
  29. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.620000]         ch1 bssid:c8:e7:d8:07:18:5e
  30. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.620000]         ch6 bssid:08:10:76:0d:1e:80
  31. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.630000]         ch6 bssid:be:b7:0d:21:ab:bc
  32. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.630000]         ch6 bssid:14:75:90:8c:79:b2
  33. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.640000]         ch6 bssid:08:10:79:96:49:02
  34. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.640000]         ch6 bssid:bc:d1:77:51:22:ae
  35. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.640000]         ch6 bssid:e4:d3:32:8b:09:ba
  36. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.650000]         ch6 bssid:50:bd:5f:16:e7:b0
  37. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.650000]         ch11 bssid:d8:fe:e3:ca:10:d1
  38. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.660000]         ch11 bssid:fc:d7:33:69:9b:08
  39. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.660000]         ch11 bssid:78:a1:06:3c:60:28
  40. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.660000]         ch11 bssid:80:89:17:53:b1:da
  41. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.670000] Channel status:
  42. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.670000]         CH1  Dirty:210 CCA:204  Time:0 Skip:NO
  43. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.680000]         CH2  Dirty:236 CCA:61  Time:0 Skip:NO
  44. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.680000]         CH3  Dirty:252 CCA:99  Time:0 Skip:NO
  45. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.690000]         CH4  Dirty:268 CCA:167  Time:0 Skip:NO
  46. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.690000]         CH5  Dirty:284 CCA:419  Time:0 Skip:NO
  47. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.700000]         CH6  Dirty:490 CCA:442  Time:0 Skip:NO
  48. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.700000]         CH7  Dirty:304 CCA:156  Time:0 Skip:NO
  49. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.710000]         CH8  Dirty:292 CCA:321  Time:0 Skip:NO
  50. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.710000]         CH9  Dirty:280 CCA:132  Time:0 Skip:NO
  51. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.720000]         CH10  Dirty:268 CCA:124  Time:0 Skip:NO
  52. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.720000]         CH11  Dirty:280 CCA:818  Time:0 Skip:NO
  53. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.730000] Channel Analysis:
  54. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.730000] Rule 1 CCA value : Min Dirtiness ==> Select Channel 1
  55. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.740000] Min Dirty = 210
  56. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.740000] ExChannel = 5 , 0
  57. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.740000] BW        = 40
  58. Tue Aug 25 00:39:30 2015 kern.alert kernel: [   31.740000] ===============================================================
  59. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  60. Tue Aug 25 00:39:31 2015 daemon.notice netifd: ra0 (1667): sh: 1: unknown operand
  61. Tue Aug 25 00:39:31 2015 daemon.notice netifd: ra0 (1667): sh: 1: unknown operand
  62. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  63. Tue Aug 25 00:39:31 2015 daemon.notice netifd: ra0 (1667): Ralink_AP:Manually bridge interface ra0 into br-lan
  64. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  65. Tue Aug 25 00:39:31 2015 daemon.notice netifd: Network device 'ra0' link is up
  66. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  67. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  68. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  69. Tue Aug 25 00:39:31 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  70. Tue Aug 25 00:39:31 2015 kern.alert kernel: [   32.020000] RT2860v2 Fast Mode init.
  71. Tue Aug 25 00:39:31 2015 kern.info kernel: [   32.260000] device ra0 entered promiscuous mode
  72. Tue Aug 25 00:39:31 2015 kern.info kernel: [   32.270000] br-lan: port 2(ra0) entered forwarding state
  73. Tue Aug 25 00:39:31 2015 kern.info kernel: [   32.270000] br-lan: port 2(ra0) entered forwarding state
  74. Tue Aug 25 00:39:31 2015 kern.info kernel: [   32.550000] eth0: port 5 link up (10Mbps/Half duplex)
  75. Tue Aug 25 00:39:31 2015 kern.info kernel: [   32.570000] eth0: port 5 link down
  76. Tue Aug 25 00:39:32 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  77. Tue Aug 25 00:39:32 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  78. Tue Aug 25 00:39:32 2015 kern.info kernel: [   34.270000] br-lan: port 2(ra0) entered forwarding state
  79. Tue Aug 25 00:39:32 2015 user.emerg syslog: uci: Invalid argument
  80. Tue Aug 25 00:39:33 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  81. Tue Aug 25 00:39:33 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  82. Tue Aug 25 00:39:33 2015 cron.info crond[2444]: crond: crond (busybox 1.22.1) started, log level 5
  83. Tue Aug 25 00:39:33 2015 kern.alert kernel: [   35.250000] PandoraBox IP bandwidth unload.
  84. Tue Aug 25 00:39:33 2015 kern.alert kernel: [   35.260000] PandoraBox IP Bandwidth load.
  85. Tue Aug 25 00:39:34 2015 daemon.err rmmod: module is not loaded
  86. Tue Aug 25 00:39:34 2015 user.emerg syslog: setting up led wifi
  87. Tue Aug 25 00:39:34 2015 user.emerg syslog: setting up led USB
  88. Tue Aug 25 00:39:34 2015 daemon.info procd: - init complete -
  89. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq[2512]: started, version 2.71 cachesize 150
  90. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq[2512]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth DNSSEC
  91. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq-dhcp[2512]: DHCP, IP range 192.168.1.2 -- 192.168.1.16, lease time 12h
  92. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq[2512]: using local addresses only for domain lan
  93. Tue Aug 25 00:39:37 2015 daemon.warn dnsmasq[2512]: no servers found in /tmp/resolv.conf.auto, will retry
  94. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq[2512]: read /etc/hosts - 1 addresses
  95. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq[2512]: read /tmp/hosts/dhcp - 1 addresses
  96. Tue Aug 25 00:39:37 2015 daemon.info dnsmasq-dhcp[2512]: read /etc/ethers - 0 addresses
  97. Tue Aug 25 00:39:37 2015 user.notice upnp daemon: external interface not found, not starting
  98. Tue Aug 25 00:39:39 2015 kern.info kernel: [   40.850000] device eth0.2 entered promiscuous mode
  99. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan1' is enabled
  100. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Network device 'macvlan1' link is up
  101. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan1' has link connectivity
  102. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan1' is setting up now
  103. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan2' is enabled
  104. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Network device 'macvlan2' link is up
  105. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan2' has link connectivity
  106. Tue Aug 25 00:39:39 2015 daemon.notice netifd: Interface 'vwan2' is setting up now
  107. Tue Aug 25 00:39:39 2015 user.notice root: 1 processes have arrived, waiting for the left 1
  108. Tue Aug 25 00:39:39 2015 user.notice root: Processes sync succeed.
  109. Tue Aug 25 00:39:39 2015 user.notice root: 2 processes have arrived, waiting for the left 0
  110. Tue Aug 25 00:39:39 2015 user.notice root: Processes sync succeed.
  111. Tue Aug 25 00:39:40 2015 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
  112. Tue Aug 25 00:39:40 2015 daemon.info pppd[2785]: Plugin rp-pppoe.so loaded.
  113. Tue Aug 25 00:39:40 2015 daemon.info pppd[2785]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
  114. Tue Aug 25 00:39:40 2015 daemon.notice pppd[2785]: pppd 2.4.7 started by root, uid 0
  115. Tue Aug 25 00:39:40 2015 daemon.info pppd[2782]: Plugin rp-pppoe.so loaded.
  116. Tue Aug 25 00:39:40 2015 daemon.info pppd[2782]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
  117. Tue Aug 25 00:39:40 2015 daemon.notice pppd[2782]: pppd 2.4.7 started by root, uid 0
  118. Tue Aug 25 00:39:41 2015 kern.info kernel: [   43.360000] eth0: port 5 link up (10Mbps/Half duplex)
  119. Tue Aug 25 00:39:41 2015 kern.info kernel: [   43.370000] eth0: port 5 link down
  120. Tue Aug 25 00:39:41 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  121. Tue Aug 25 00:39:41 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  122. Tue Aug 25 00:39:45 2015 daemon.info pppd[2785]: PPP session is 583
  123. Tue Aug 25 00:39:45 2015 daemon.warn pppd[2785]: Connected to 00:00:5e:00:01:01 via interface macvlan2
  124. Tue Aug 25 00:39:45 2015 daemon.info pppd[2782]: PPP session is 19507
  125. Tue Aug 25 00:39:45 2015 daemon.warn pppd[2782]: Connected to 00:00:5e:00:01:01 via interface macvlan1
  126. Tue Aug 25 00:39:45 2015 daemon.info pppd[2785]: Using interface pppoe-vwan2
  127. Tue Aug 25 00:39:45 2015 daemon.notice pppd[2785]: Connect: pppoe-vwan2 <--> macvlan2
  128. Tue Aug 25 00:39:45 2015 daemon.info pppd[2782]: Using interface pppoe-vwan1
  129. Tue Aug 25 00:39:45 2015 daemon.notice pppd[2782]: Connect: pppoe-vwan1 <--> macvlan1
  130. Tue Aug 25 00:39:48 2015 daemon.info pppd[2785]: 1 pppd have arrived, waiting for the left 1
  131. Tue Aug 25 00:39:48 2015 daemon.info pppd[2782]: 2 pppd have arrived, waiting for the left 0
  132. Tue Aug 25 00:39:48 2015 daemon.info pppd[2785]: syncppp sync succeeded
  133. Tue Aug 25 00:39:48 2015 daemon.info pppd[2782]: syncppp sync succeeded
  134. Tue Aug 25 00:39:48 2015 daemon.info pppd[2785]: Remote message: Authentication success,Welcome!
  135. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: PAP authentication succeeded
  136. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: peer from calling number 00:00:5E:00:01:01 authorized
  137. Tue Aug 25 00:39:48 2015 daemon.info pppd[2782]: Remote message: Authentication success,Welcome!
  138. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: PAP authentication succeeded
  139. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: peer from calling number 00:00:5E:00:01:01 authorized
  140. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: local  IP address 10.4.98.152
  141. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: remote IP address 10.4.0.1
  142. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: primary   DNS address 218.201.17.2
  143. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2782]: secondary DNS address 218.201.4.3
  144. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: local  IP address 10.4.8.145
  145. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: remote IP address 10.4.0.1
  146. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: primary   DNS address 218.201.17.2
  147. Tue Aug 25 00:39:48 2015 daemon.notice pppd[2785]: secondary DNS address 218.201.4.3
  148. Tue Aug 25 00:39:48 2015 daemon.notice netifd: Network device 'pppoe-vwan2' link is up
  149. Tue Aug 25 00:39:48 2015 daemon.notice netifd: Interface 'vwan2' is now up
  150. Tue Aug 25 00:39:48 2015 daemon.notice netifd: Network device 'pppoe-vwan1' link is up
  151. Tue Aug 25 00:39:48 2015 daemon.notice netifd: Interface 'vwan1' is now up
  152. Tue Aug 25 00:39:48 2015 user.notice mwan3: ifup interface vwan2 (pppoe-vwan2)
  153. Tue Aug 25 00:39:50 2015 user.notice firewall: Reloading firewall due to ifup of vwan2 (pppoe-vwan2)
  154. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: reading /tmp/resolv.conf.auto
  155. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: using local addresses only for domain lan
  156. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: using nameserver 218.201.17.2#53
  157. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: using nameserver 218.201.4.3#53
  158. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: using nameserver 218.201.17.2#53
  159. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: using nameserver 218.201.4.3#53
  160. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[2512]: exiting on receipt of SIGTERM
  161. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: started, version 2.71 cachesize 150
  162. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth DNSSEC
  163. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq-dhcp[3348]: DHCP, IP range 192.168.1.2 -- 192.168.1.16, lease time 12h
  164. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using local addresses only for domain lan
  165. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: reading /tmp/resolv.conf.auto
  166. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using local addresses only for domain lan
  167. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using nameserver 218.201.17.2#53
  168. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using nameserver 218.201.4.3#53
  169. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using nameserver 218.201.17.2#53
  170. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: using nameserver 218.201.4.3#53
  171. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: read /etc/hosts - 1 addresses
  172. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq[3348]: read /tmp/hosts/dhcp - 1 addresses
  173. Tue Aug 25 00:39:51 2015 daemon.info dnsmasq-dhcp[3348]: read /etc/ethers - 0 addresses
  174. Tue Aug 25 00:39:51 2015 user.notice mwan3: ifup interface vwan1 (pppoe-vwan1)
  175. Tue Aug 25 00:39:52 2015 user.notice firewall: Reloading firewall due to ifup of vwan1 (pppoe-vwan1)
  176. Tue Aug 25 00:39:54 2015 daemon.err miniupnpd[3637]: could not open lease file: /var/upnp.leases
  177. Tue Aug 25 00:39:54 2015 daemon.notice miniupnpd[3637]: HTTP listening on port 5000
  178. Tue Aug 25 00:39:54 2015 daemon.warn miniupnpd[3637]: no HTTP IPv6 address, disabling IPv6
  179. Tue Aug 25 00:39:54 2015 daemon.notice miniupnpd[3637]: Listening for NAT-PMP/PCP traffic on port 5351
  180. Tue Aug 25 00:40:06 2015 daemon.info dnsmasq-dhcp[3348]: DHCPREQUEST(br-lan) 192.168.1.12 bc:30:7e:24:56:59
  181. Tue Aug 25 00:40:06 2015 daemon.info dnsmasq-dhcp[3348]: DHCPACK(br-lan) 192.168.1.12 bc:30:7e:24:56:59 20150816-233356
  182. Tue Aug 25 00:40:06 2015 user.notice wifi: ACTION=CONNECT  MAC=bc:30:7e:24:56:59  SPEED=135 SIGNAL=-46
  183. Tue Aug 25 18:15:02 2015 cron.err crond[2444]: time disparity of 1055 minutes detected
  184. Tue Aug 25 18:15:02 2015 kern.info kernel: [  122.910000] eth0: port 5 link up (10Mbps/Half duplex)
  185. Tue Aug 25 18:15:02 2015 kern.info kernel: [  122.930000] eth0: port 5 link down
  186. Tue Aug 25 18:15:02 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  187. Tue Aug 25 18:15:03 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  188. Tue Aug 25 18:15:55 2015 kern.info kernel: [  175.250000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  189. Tue Aug 25 18:16:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPREQUEST(br-lan) 192.168.1.15 58:44:98:2e:f9:55
  190. Tue Aug 25 18:16:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPACK(br-lan) 192.168.1.15 58:44:98:2e:f9:55 RedmiNote2-hongmishouji
  191. Tue Aug 25 18:16:15 2015 user.notice wifi: ACTION=CONNECT  MAC=58:44:98:2e:f9:55  SPEED=135 SIGNAL=-50
  192. Tue Aug 25 18:16:27 2015 kern.info kernel: [  207.250000] eth0: port 5 link up (10Mbps/Half duplex)
  193. Tue Aug 25 18:16:27 2015 kern.info kernel: [  207.270000] eth0: port 5 link down
  194. Tue Aug 25 18:16:27 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  195. Tue Aug 25 18:16:27 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  196. Tue Aug 25 18:16:41 2015 kern.info kernel: [  221.880000] eth0: port 5 link up (10Mbps/Half duplex)
  197. Tue Aug 25 18:16:41 2015 kern.info kernel: [  221.890000] eth0: port 5 link down
  198. Tue Aug 25 18:16:41 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  199. Tue Aug 25 18:16:41 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
  200. Tue Aug 25 18:17:43 2015 daemon.info dnsmasq-dhcp[3348]: DHCPINFORM(br-lan) 192.168.1.12 bc:30:7e:24:56:59
  201. Tue Aug 25 18:17:43 2015 daemon.info dnsmasq-dhcp[3348]: DHCPACK(br-lan) 192.168.1.12 bc:30:7e:24:56:59 20150816-233356
  202. Tue Aug 25 18:20:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPDISCOVER(br-lan) 64:88:ff:34:01:19
  203. Tue Aug 25 18:20:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPOFFER(br-lan) 192.168.1.3 64:88:ff:34:01:19
  204. Tue Aug 25 18:20:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPREQUEST(br-lan) 192.168.1.3 64:88:ff:34:01:19
  205. Tue Aug 25 18:20:14 2015 daemon.info dnsmasq-dhcp[3348]: DHCPACK(br-lan) 192.168.1.3 64:88:ff:34:01:19 android-cb25a63d41e84ea4
  206. Tue Aug 25 18:20:21 2015 user.notice wifi: ACTION=CONNECT  MAC=64:88:ff:34:01:19  SPEED=108 SIGNAL=-46
  207. Tue Aug 25 18:20:22 2015 user.notice wifi: ACTION=CONNECT  MAC=64:88:ff:34:01:19  SPEED=121 SIGNAL=-39
  208. Tue Aug 25 18:22:02 2015 kern.info kernel: [  542.390000] eth0: port 5 link up (10Mbps/Half duplex)
  209. Tue Aug 25 18:22:02 2015 kern.info kernel: [  542.410000] eth0: port 5 link down
  210. Tue Aug 25 18:22:02 2015 user.notice switch: ACTION=UP  PORT=5  SPEED=10 DUPLEX=0
  211. Tue Aug 25 18:22:02 2015 user.notice switch: ACTION=DOWN  PORT=5  SPEED=0 DUPLEX=0
复制代码
刷的是http://downloads.openwrt.org.cn/ ... -r1024-20150608.bin
之前有个斐讯 300m 也是7620n的机子  wifi也不稳定   不知道是怎么回事   有大神知道吗。。
如意云logo

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？立即注册

×

相关帖子

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2015-8-25 18:33 | 显示全部楼层
内核日志
  1. [    0.000000] Linux version 3.14.44 (lintel@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 r969) ) #7 Mon Jun 8 22:23:15 CST 2015
  2. [    0.000000] Analog PMU set to hw control
  3. [    0.000000] Digital PMU set to hw control
  4. [    0.000000] PandoraBox CPUID Module for Ralink/MTK SoC v1.1.
  5. [    0.000000] MediaTek MT7620 pkg:QFN rev:2 eco:3 CPU:580MHz, Bus:193MHz Uart:40MHz
  6. [    0.000000] CPU running in Little Endian
  7. [    0.000000] Board VLAN:LLLLW
  8. [    0.000000] Flash:SPI Size: 16MB
  9. [    0.000000] DRAM: 64MB DDR 16 bits
  10. [    0.000000] Kernel Support [PCI] [USB]
  11. [    0.000000] prom memory:64MB
  12. [    0.000000]  PCIE: bypass PCIe DLL.
  13. [    0.000000]  PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
  14. [    0.000000]  disable all power about PCIe
  15. [    0.000000]  PCIE: PLL power down for MT7620N
  16. [    0.000000] bootconsole [early0] enabled
  17. [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
  18. [    0.000000] Software DMA cache coherency
  19. [    0.000000] Determined physical RAM map:
  20. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  21. [    0.000000] Initrd not found or empty - disabling initrd
  22. [    0.000000] Zone ranges:
  23. [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
  24. [    0.000000] Movable zone start for each node
  25. [    0.000000] Early memory node ranges
  26. [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
  27. [    0.000000] On node 0 totalpages: 16384
  28. [    0.000000] free_area_init_node: node 0, pgdat 8030ec40, node_mem_map 81000000
  29. [    0.000000]   Normal zone: 128 pages used for memmap
  30. [    0.000000]   Normal zone: 0 pages reserved
  31. [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
  32. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  33. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  34. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  35. [    0.000000] pcpu-alloc: [0] 0
  36. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  37. [    0.000000] Kernel command line: pause_on_oops=10 noresume  board=RY-1 console=ttyS1,115200 rootfstype=squashfs,jffs2
  38. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  39. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  40. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  41. [    0.000000] Writing ErrCtl register=0001f0d3
  42. [    0.000000] Readback ErrCtl register=0001f0d3
  43. [    0.000000] Memory: 61260K/65536K available (2570K kernel code, 136K rwdata, 520K rodata, 156K init, 257K bss, 4276K reserved)
  44. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  45. [    0.000000] NR_IRQS:256
  46. [    0.000000] console [ttyS1] enabled
  47. [    0.000000] bootconsole [early0] disabled
  48. [    0.010000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  49. [    0.070000] pid_max: default: 32768 minimum: 301
  50. [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  51. [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  52. [    0.090000] pinctrl core: initialized pinctrl subsystem
  53. [    0.090000] NET: Registered protocol family 16
  54. [    0.100000] Ralink/MTK BootROM maped.
  55. [    0.100000] Generic GPIO Driver for MediaTek MT7620 Board. (c) 2013-2015 PandoraBox Team
  56. [    0.110000] MT7620-GPIO0:registering 24 irq handlers
  57. [    0.110000] MT7620-GPIO1:registering 16 irq handlers
  58. [    0.120000] MT7620-GPIO2:registering 32 irq handlers
  59. [    0.120000] MT7620-GPIO3:registering 1 irq handlers
  60. [    0.130000] MIPS: machine is D-Team RY-1
  61. [    0.130000] ralink_register_flash:SPI Flash.
  62. [    0.130000] Ralink/MTK PinCtrl registered.
  63. [    0.140000] Generic PinCtrl Driver for MediaTek MT7620 Board. (c) 2013-2015 PandoraBox Team
  64. [    0.140000] PINCTRL:add 24 pins for MT7620-PINCTRL0.
  65. [    0.150000] PINCTRL:add 16 pins for MT7620-PINCTRL1.
  66. [    0.150000] PINCTRL:add 32 pins for MT7620-PINCTRL2.
  67. [    0.160000] PINCTRL:add 1 pins for MT7620-PINCTRL3.
  68. [    0.160000] GPIO_MODE_REG:0x5A371D
  69. [    0.170000] bio: create slab <bio-0> at 0
  70. [    0.180000] Switched to clocksource MIPS
  71. [    0.190000] NET: Registered protocol family 2
  72. [    0.190000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  73. [    0.200000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  74. [    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
  75. [    0.210000] TCP: reno registered
  76. [    0.210000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  77. [    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  78. [    0.230000] NET: Registered protocol family 1
  79. [    0.230000] PCI: CLS 0 bytes, default 32
  80. [    0.230000] Ralink SoC clocks api init.
  81. [    0.230000] mips hpt frequency:290000000HZ
  82. [    0.240000] Ralink/MTK APSoC GPIO Resource maped.
  83. [    0.240000] Load Kernel WDG Timer Module
  84. [    0.250000] Load Ralink Timer0 Module
  85. [    0.250000] MTK/Ralink EHCI/OHCI init.
  86. [    0.260000] futex hash table entries: 256 (order: -1, 3072 bytes)
  87. [    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  88. [    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  89. [    0.300000] msgmni has been set to 119
  90. [    0.300000] io scheduler noop registered
  91. [    0.310000] io scheduler deadline registered (default)
  92. [    0.310000] io scheduler cfq registered
  93. [    0.320000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  94. [    0.320000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 37, base_baud = 2500000) is a 16550A
  95. [    0.330000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12, base_baud = 2500000) is a 16550A
  96. [    0.340000] Enable Ralink GDMA Controller Module
  97. [    0.350000] GDMA IP Version=3
  98. [    0.360000] brd: module loaded
  99. [    0.370000] Ralink SPI flash Driver for PandoraBox.
  100. [    0.370000] device id : ef 40 18 0 0 (40180000)
  101. [    0.380000] Found WinBond Serial flash.
  102. [    0.380000] W25Q128BV(ef 40180000) (16384 Kbytes)
  103. [    0.390000] mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 65536
  104. [    0.400000] Creating 5 MTD partitions on "raspi":
  105. [    0.400000] 0x000000000000-0x000000030000 : "u-boot"
  106. [    0.410000] 0x000000030000-0x000000040000 : "u-boot-env"
  107. [    0.420000] 0x000000040000-0x000000050000 : "Factory"
  108. [    0.420000] 0x000000000000-0x000001000000 : "fullflash"
  109. [    0.430000] 0x000000050000-0x000001000000 : "firmware"
  110. [    0.450000] 3 uimage-fw partitions found on MTD device firmware
  111. [    0.460000] 0x000000050000-0x00000017313e : "kernel"
  112. [    0.470000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  113. [    0.480000] 0x00000017313e-0x000000fe0000 : "rootfs"
  114. [    0.490000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  115. [    0.500000] mtd: device 6 (rootfs) set to be root filesystem
  116. [    0.510000] 1 squashfs-split partitions found on MTD device rootfs
  117. [    0.510000] 0x000000750000-0x000000fe0000 : "rootfs_data"
  118. [    0.520000] 0x000000fe0000-0x000001000000 : "panic_oops"
  119. [    0.530000] mtdoops: ready 0, 1 (no erase)
  120. [    0.530000] mtdoops: Attached to MTD device 8
  121. [    0.540000] rdm_major = 252
  122. [    0.540000] raeth: embedded switch reset
  123. [    0.550000] EEPROM:Read from [Factory] offset 0x28,length 0x6.
  124. [    0.560000] mt762x-gsw switch driver registered
  125. [    0.560000] mt762x-gsw default vlans:wllll
  126. [    0.560000] Ralink APSoC Ethernet Driver v3.2.1 (raeth)
  127. [    0.570000] raeth: PDMA RX ring 512, PDMA TX ring 512. Max packet size 1536
  128. [    0.580000] raeth: NAPI & GRO support, weight 32
  129. [    0.580000] TCP: cubic registered
  130. [    0.590000] TCP: westwood registered
  131. [    0.590000] TCP: hybla registered
  132. [    0.590000] TCP: htcp registered
  133. [    0.600000] NET: Registered protocol family 17
  134. [    0.600000] Bridge firewalling registered
  135. [    0.610000] Ebtables v2.0 registered
  136. [    0.610000] 8021q: 802.1Q VLAN Support v1.8
  137. [    0.610000] PandoraBox Mass Storage accelerater v1.2
  138. [    0.620000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
  139. [    0.630000] Freeing unused kernel memory: 156K (80329000 - 80350000)
  140. [    1.830000] init: Console is alive
  141. [    4.400000] usbcore: registered new interface driver usbfs
  142. [    4.400000] usbcore: registered new interface driver hub
  143. [    4.410000] usbcore: registered new device driver usb
  144. [    4.420000] exFAT: Version 1.2.9
  145. [    4.460000] ufsd: module license 'Commercial product' taints kernel.
  146. [    4.470000] Disabling lock debugging due to kernel taint
  147. [    4.490000] ufsd: driver (8.6, Jun  8 2015 16:22:18, LBD=ON, delalloc, ioctl, bdi) loaded at c02bb000
  148. [    4.490000] NTFS (with native replay) support included
  149. [    4.490000] optimized: speed
  150. [    4.490000] Built for PandoraBox 2013-12-27
  151. [    4.490000]
  152. [    4.510000] PandoraBox Button Driver init
  153. [    4.520000] Button [reset] mapped to GPIO1 and IRQ65
  154. [    4.530000] SCSI subsystem initialized
  155. [    4.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  156. [    4.550000] ehci-platform: EHCI generic platform driver
  157. [    4.580000] ehci-platform ehci-platform: EHCI Host Controller
  158. [    4.580000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  159. [    4.590000] ehci-platform ehci-platform: irq 18, io mem 0x101c0000
  160. [    4.620000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  161. [    4.620000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  162. [    4.630000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  163. [    4.640000] usb usb1: Product: EHCI Host Controller
  164. [    4.640000] usb usb1: Manufacturer: Linux 3.14.44 ehci_hcd
  165. [    4.650000] usb usb1: SerialNumber: ehci-platform
  166. [    4.650000] hub 1-0:1.0: USB hub found
  167. [    4.660000] hub 1-0:1.0: 1 port detected
  168. [    4.660000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  169. [    4.670000] ohci-platform: OHCI generic platform driver
  170. [    4.700000] ohci-platform ohci-platform: Generic Platform OHCI controller
  171. [    4.700000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  172. [    4.710000] ohci-platform ohci-platform: irq 18, io mem 0x101c1000
  173. [    4.780000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  174. [    4.790000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  175. [    4.790000] usb usb2: Product: Generic Platform OHCI controller
  176. [    4.800000] usb usb2: Manufacturer: Linux 3.14.44 ohci_hcd
  177. [    4.810000] usb usb2: SerialNumber: ohci-platform
  178. [    4.810000] hub 2-0:1.0: USB hub found
  179. [    4.820000] hub 2-0:1.0: 1 port detected
  180. [    4.830000] mtk-sd: MediaTek MT76xx MSDC Driver
  181. [    4.850000] usbcore: registered new interface driver usb-storage
  182. [    4.870000] init: - preinit -
  183. [    5.020000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  184. [    5.300000] random: mktemp urandom read with 59 bits of entropy available
  185. [    5.350000] usb 1-1: New USB device found, idVendor=abcd, idProduct=1234
  186. [    5.350000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  187. [    5.360000] usb 1-1: Product: UDisk           
  188. [    5.360000] usb 1-1: Manufacturer: General
  189. [    5.370000] usb 1-1: SerialNumber: 1501242317080691867500
  190. [    5.380000] usb-storage 1-1:1.0: USB Mass Storage device detected
  191. [    5.380000] scsi0 : usb-storage 1-1:1.0
  192. [    8.520000] mount_root: loading kmods from internal overlay
  193. [    8.540000] scsi 0:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
  194. [    8.560000] sd 0:0:0:0: [sda] 18116472 512-byte logical blocks: (9.27 GB/8.63 GiB)
  195. [    8.580000] sd 0:0:0:0: [sda] Write Protect is off
  196. [    8.580000] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
  197. [    8.580000] sd 0:0:0:0: [sda] No Caching mode page found
  198. [    8.590000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  199. [    8.600000] sd 0:0:0:0: [sda] No Caching mode page found
  200. [    8.600000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  201. [    8.770000]  sda: sda4
  202. [    8.780000] sd 0:0:0:0: [sda] No Caching mode page found
  203. [    8.780000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  204. [    8.790000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  205. [    8.900000] random: nonblocking pool is initialized
  206. [    9.030000] jffs2: notice: (385) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 27 of xref (0 dead, 1 orphan) found.
  207. [    9.040000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  208. [    9.050000] block: unable to load configuration (fstab: Entry not found)
  209. [    9.060000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  210. [    9.070000] block: extroot: not configured
  211. [    9.120000] jffs2: notice: (375) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 27 of xref (0 dead, 1 orphan) found.
  212. [    9.140000] mount_root: loading kmods from internal overlay
  213. [    9.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  214. [    9.360000] block: unable to load configuration (fstab: Entry not found)
  215. [    9.370000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  216. [    9.370000] block: extroot: not configured
  217. [    9.380000] mount_root: switching to jffs2 overlay
  218. [    9.400000] procd: - early -
  219. [   10.310000] procd: - ubus -
  220. [   11.320000] procd: - init -
  221. [   12.700000] NET: Registered protocol family 10
  222. [   12.720000] NET: Registered protocol family 8
  223. [   12.730000] NET: Registered protocol family 20
  224. [   12.750000] tun: Universal TUN/TAP device driver, 1.6
  225. [   12.750000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  226. [   12.770000] l2tp_core: L2TP core driver, V2.0
  227. [   12.770000] l2tp_netlink: L2TP netlink interface
  228. [   12.780000] sit: IPv6 over IPv4 tunneling driver
  229. [   12.790000] gre: GRE over IPv4 demultiplexor driver
  230. [   12.800000] ip_gre: GRE over IPv4 tunneling driver
  231. [   12.810000] gpiodev: gpio device registered with major 251
  232. [   12.830000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
  233. [   12.840000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  234. [   12.860000] Netfilter messages via NETLINK v0.30.
  235. [   12.870000] ip_set: protocol 6
  236. [   12.910000] Ralink/MTK i2c driver load.
  237. [   12.920000] u32 classifier
  238. [   12.930000]     input device check on
  239. [   12.930000]     Actions configured
  240. [   12.940000] Mirror/redirect action on
  241. [   13.420000] PandoraBox RT2860v2 AP Driver version-3.0.3.2(Jun  8 2015 22:10:24).
  242. [   13.440000] PandoraBox IP Bandwidth load.
  243. [   13.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
  244. [   13.970000] usbcore: registered new interface driver usblp
  245. [   13.990000] usbcore: registered new interface driver usbserial
  246. [   14.000000] usbcore: registered new interface driver usbserial_generic
  247. [   14.000000] usbserial: USB Serial support registered for generic
  248. [   14.100000] xt_time: kernel timezone is -0000
  249. [   14.120000] usbcore: registered new interface driver ftdi_sio
  250. [   14.120000] usbserial: USB Serial support registered for FTDI USB Serial Device
  251. [   14.170000] usbcore: registered new interface driver pl2303
  252. [   14.170000] usbserial: USB Serial support registered for pl2303
  253. [   14.190000] PPP generic driver version 2.4.2
  254. [   14.200000] PPP MPPE Compression module registered
  255. [   14.220000] NET: Registered protocol family 24
  256. [   14.220000] PPTP driver version 0.8.5
  257. [   14.250000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  258. [   14.250000] usbcore: registered new interface driver option
  259. [   14.260000] usbserial: USB Serial support registered for GSM modem (1-port)
  260. [   14.280000] usbcore: registered new interface driver qcserial
  261. [   14.290000] usbserial: USB Serial support registered for Qualcomm USB modem
  262. [   16.530000] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
  263. [   16.570000] EXT4-fs (sda4): mounted filesystem without journal. Opts:
  264. [   24.230000] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  265. [   24.360000] PandoraBox RT2860v2 AP Driver version-3.0.3.2(Jun  8 2015 22:10:24).
  266. [   24.710000] raeth: frame engine reset
  267. [   24.710000] GE1 found PHY_ID0:0xFF76,PHYID1:0xFE52
  268. [   24.720000] No PHY connected on GE2
  269. [   24.730000] raeth: HW VLAN TX offload enabled
  270. [   24.730000] raeth: HW IP/TCP/UDP checksum RX offload enabled
  271. [   24.750000] device eth0.1 entered promiscuous mode
  272. [   24.750000] device eth0 entered promiscuous mode
  273. [   24.760000] br-lan: port 1(eth0.1) entered forwarding state
  274. [   24.760000] br-lan: port 1(eth0.1) entered forwarding state
  275. [   24.770000] eth0: port 5 link up (10Mbps/Half duplex)
  276. [   24.780000] eth0: port 5 link down
  277. [   24.810000] eth0: port 5 link up (10Mbps/Half duplex)
  278. [   24.830000] eth0: port 5 link down
  279. [   24.840000] eth0: port 5 link up (10Mbps/Half duplex)
  280. [   24.860000] eth0: port 5 link down
  281. [   24.940000] eth0: port 5 link up (10Mbps/Half duplex)
  282. [   24.950000] eth0: port 5 link down
  283. [   24.990000] eth0: port 5 link up (10Mbps/Full duplex)
  284. [   25.020000] eth0: port 5 link down
  285. [   25.100000] eth0: port 5 link up (10Mbps/Half duplex)
  286. [   25.130000] eth0: port 5 link down
  287. [   25.170000] eth0: port 5 link up (10Mbps/Half duplex)
  288. [   25.190000] eth0: port 5 link down
  289. [   25.220000] eth0: port 5 link up (10Mbps/Half duplex)
  290. [   25.250000] eth0: port 5 link down
  291. [   25.270000] eth0: port 5 link up (10Mbps/Half duplex)
  292. [   25.280000] eth0: port 5 link down
  293. [   25.440000] eth0: port 5 link up (10Mbps/Half duplex)
  294. [   25.460000] eth0: port 5 link down
  295. [   25.490000] eth0: port 5 link up (10Mbps/Full duplex)
  296. [   25.520000] eth0: port 5 link down
  297. [   25.550000] eth0: port 5 link up (10Mbps/Half duplex)
  298. [   25.570000] eth0: port 5 link down
  299. [   25.600000] eth0: port 5 link up (10Mbps/Half duplex)
  300. [   25.630000] eth0: port 5 link down
  301. [   25.650000] eth0: port 5 link up (10Mbps/Full duplex)
  302. [   25.680000] eth0: port 5 link down
  303. [   25.770000] eth0: port 5 link up (10Mbps/Half duplex)
  304. [   25.790000] eth0: port 5 link down
  305. [   25.800000] eth0: port 5 link up (100Mbps/Full duplex)
  306. [   25.840000] eth0: port 5 link down
  307. [   25.850000] eth0: port 5 link up (10Mbps/Half duplex)
  308. [   25.900000] eth0: port 5 link down
  309. [   25.910000] eth0: port 5 link up (10Mbps/Half duplex)
  310. [   25.960000] eth0: port 5 link down
  311. [   26.060000] eth0: port 5 link up (10Mbps/Half duplex)
  312. [   26.070000] eth0: port 5 link down
  313. [   26.170000] eth0: port 5 link up (10Mbps/Half duplex)
  314. [   26.180000] eth0: port 5 link down
  315. [   26.240000] eth0: port 5 link up (10Mbps/Half duplex)
  316. [   26.260000] eth0: port 5 link down
  317. [   26.280000] eth0: port 5 link up (10Mbps/Half duplex)
  318. [   26.290000] eth0: port 5 link down
  319. [   26.480000] eth0: port 5 link up (10Mbps/Half duplex)
  320. [   26.500000] eth0: port 5 link down
  321. [   26.510000] eth0: port 5 link up (10Mbps/Half duplex)
  322. [   26.530000] eth0: port 5 link down
  323. [   26.560000] eth0: port 5 link up (10Mbps/Full duplex)
  324. [   26.590000] eth0: port 5 link down
  325. [   26.610000] eth0: port 5 link up (10Mbps/Half duplex)
  326. [   26.620000] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  327. [   26.630000] eth0: port 5 link down
  328. [   26.670000] eth0: port 5 link up (10Mbps/Half duplex)
  329. [   26.680000] eth0: port 5 link down
  330. [   26.760000] br-lan: port 1(eth0.1) entered forwarding state
  331. [   26.790000] eth0: port 5 link up (10Mbps/Half duplex)
  332. [   26.830000] eth0: port 5 link down
  333. [   26.920000] eth0: port 5 link up (10Mbps/Half duplex)
  334. [   26.940000] eth0: port 5 link down
  335. [   27.050000] PandoraBox RT2860v2 AP Driver version-3.0.3.2(Jun  8 2015 22:10:24).
  336. [   27.060000] eth0: port 5 link up (10Mbps/Half duplex)
  337. [   27.080000] eth0: port 5 link down
  338. [   27.140000] eth0: port 5 link up (10Mbps/Half duplex)
  339. [   27.170000] eth0: port 5 link down
  340. [   27.190000] eth0: port 5 link up (100Mbps/Half duplex)
  341. [   27.220000] eth0: port 5 link down
  342. [   27.270000] eth0: port 5 link up (10Mbps/Half duplex)
  343. [   27.280000] eth0: port 5 link down
  344. [   27.380000] eth0: port 5 link up (10Mbps/Half duplex)
  345. [   27.410000] eth0: port 5 link down
  346. [   27.460000] eth0: port 5 link up (10Mbps/Half duplex)
  347. [   27.470000] eth0: port 5 link down
  348. [   27.520000] eth0: port 5 link up (10Mbps/Half duplex)
  349. [   27.550000] eth0: port 5 link down
  350. [   27.660000] eth0: port 5 link up (10Mbps/Half duplex)
  351. [   27.670000] EEPROM:Read from [Factory] offset 0x0,length 0x200.
  352. [   27.680000] eth0: port 5 link down
  353. [   28.150000] eth0: port 5 link up (10Mbps/Half duplex)
  354. [   28.180000] eth0: port 5 link down
  355. [   28.490000] eth0: port 5 link up (10Mbps/Half duplex)
  356. [   28.510000] eth0: port 5 link down
  357. [   28.560000] eth0: port 5 link up (10Mbps/Half duplex)
  358. [   28.570000] eth0: port 5 link down
  359. [   28.650000] eth0: port 5 link up (10Mbps/Half duplex)
  360. [   28.670000] eth0: port 5 link down
  361. [   29.120000] eth0: port 5 link up (10Mbps/Half duplex)
  362. [   29.140000] eth0: port 5 link down
  363. [   29.330000] eth0: port 0 link up (100Mbps/Full duplex)
  364. [   30.850000] eth0: port 5 link up (10Mbps/Half duplex)
  365. [   30.870000] eth0: port 5 link down
  366. [   31.150000] eth0: port 5 link up (10Mbps/Half duplex)
  367. [   31.170000] eth0: port 5 link down
  368. [   31.600000] PandoraBox RT2860v2 Smart Channel Sniffer started.
  369. [   31.600000] ===============================================================
  370. [   31.610000] Scanned BSSID list:
  371. [   31.610000]         ch1 bssid:ec:88:8f:77:bb:42
  372. [   31.620000]         ch1 bssid:78:eb:14:8c:19:d2
  373. [   31.620000]         ch1 bssid:c8:e7:d8:07:18:5e
  374. [   31.620000]         ch6 bssid:08:10:76:0d:1e:80
  375. [   31.630000]         ch6 bssid:be:b7:0d:21:ab:bc
  376. [   31.630000]         ch6 bssid:14:75:90:8c:79:b2
  377. [   31.640000]         ch6 bssid:08:10:79:96:49:02
  378. [   31.640000]         ch6 bssid:bc:d1:77:51:22:ae
  379. [   31.640000]         ch6 bssid:e4:d3:32:8b:09:ba
  380. [   31.650000]         ch6 bssid:50:bd:5f:16:e7:b0
  381. [   31.650000]         ch11 bssid:d8:fe:e3:ca:10:d1
  382. [   31.660000]         ch11 bssid:fc:d7:33:69:9b:08
  383. [   31.660000]         ch11 bssid:78:a1:06:3c:60:28
  384. [   31.660000]         ch11 bssid:80:89:17:53:b1:da
  385. [   31.670000] Channel status:
  386. [   31.670000]         CH1  Dirty:210 CCA:204  Time:0 Skip:NO
  387. [   31.680000]         CH2  Dirty:236 CCA:61  Time:0 Skip:NO
  388. [   31.680000]         CH3  Dirty:252 CCA:99  Time:0 Skip:NO
  389. [   31.690000]         CH4  Dirty:268 CCA:167  Time:0 Skip:NO
  390. [   31.690000]         CH5  Dirty:284 CCA:419  Time:0 Skip:NO
  391. [   31.700000]         CH6  Dirty:490 CCA:442  Time:0 Skip:NO
  392. [   31.700000]         CH7  Dirty:304 CCA:156  Time:0 Skip:NO
  393. [   31.710000]         CH8  Dirty:292 CCA:321  Time:0 Skip:NO
  394. [   31.710000]         CH9  Dirty:280 CCA:132  Time:0 Skip:NO
  395. [   31.720000]         CH10  Dirty:268 CCA:124  Time:0 Skip:NO
  396. [   31.720000]         CH11  Dirty:280 CCA:818  Time:0 Skip:NO
  397. [   31.730000] Channel Analysis:
  398. [   31.730000] Rule 1 CCA value : Min Dirtiness ==> Select Channel 1
  399. [   31.740000] Min Dirty = 210
  400. [   31.740000] ExChannel = 5 , 0
  401. [   31.740000] BW        = 40
  402. [   31.740000] ===============================================================
  403. [   32.020000] RT2860v2 Fast Mode init.
  404. [   32.260000] device ra0 entered promiscuous mode
  405. [   32.270000] br-lan: port 2(ra0) entered forwarding state
  406. [   32.270000] br-lan: port 2(ra0) entered forwarding state
  407. [   32.550000] eth0: port 5 link up (10Mbps/Half duplex)
  408. [   32.570000] eth0: port 5 link down
  409. [   34.270000] br-lan: port 2(ra0) entered forwarding state
  410. [   35.250000] PandoraBox IP bandwidth unload.
  411. [   35.260000] PandoraBox IP Bandwidth load.
  412. [   40.850000] device eth0.2 entered promiscuous mode
  413. [   43.360000] eth0: port 5 link up (10Mbps/Half duplex)
  414. [   43.370000] eth0: port 5 link down
  415. [  122.910000] eth0: port 5 link up (10Mbps/Half duplex)
  416. [  122.930000] eth0: port 5 link down
  417. [  175.250000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  418. [  207.250000] eth0: port 5 link up (10Mbps/Half duplex)
  419. [  207.270000] eth0: port 5 link down
  420. [  221.880000] eth0: port 5 link up (10Mbps/Half duplex)
  421. [  221.890000] eth0: port 5 link down
  422. [  542.390000] eth0: port 5 link up (10Mbps/Half duplex)
  423. [  542.410000] eth0: port 5 link down
  424. [  688.060000] eth0: port 5 link up (10Mbps/Half duplex)
  425. [  688.080000] eth0: port 5 link down
  426. [  751.070000] eth0: port 5 link up (10Mbps/Half duplex)
  427. [  751.090000] eth0: port 5 link down
复制代码
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-8-25 18:37 | 显示全部楼层
刷个华硕的固件试试

点评

gfq524563577
华硕好像也不稳定 而且不能多播  详情 回复 发表于 2015-8-25 18:41
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2015-8-25 18:41 | 显示全部楼层
wonathan 发表于 2015-8-25 18:37
刷个华硕的固件试试

华硕好像也不稳定
而且不能多播
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-19 01:52

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com 举报电话：0519-86695797

快速回复 返回顶部 返回列表