【源码】发一个老毛子的源码Wive-NG-mt，看有没有人研究。

ivyswen

http://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/ 内置MTK的驱动，作者明确指出仅供个人使用！

WN-MT MT7620N / H
Wive-NG-MT is a further development of embedded software for the routers for the new budget chip from Ralink / Mediatek MT7620. All the information on the pages of RT305h and RT3883 (Wive-NG-RTNL) as relevant for Wive-NG-MT.

Wive-NG-MT is a commercial open embedded operating system (distribution) developed by order of NAG. Wive free and free for personal use only. Commercial use of non-GPL code base components (separate programs, including scripts and kernel modules, for which the code explicitly specified binary only license or a license is no indication at all) or the resulting images Wive-NG-MT is prohibited without the coordination with us and the customer.

Commercial use is meant the formation of images to preset from the factory to the device than the officially supported (listed below). This is due to (at least) with the additional burdens of agreement (oral or written) with our factories and chipmeykerom providing binary only code components under license.

All the GPL (and the code under other licenses viral) can be used (and used) in any other projects do not violate the terms of individual agreements. In git contains source code needed to build completely similar images published by me in binary form. Also available all the changes and corrections.

We do not guarantee correct work on devices other than those produced by our customers. Just do not take any responsibility for damage to your equipment. Remember that after pouring Wive on the side of the device you will lose the individual calibration data, as well as that of possible configurations MT7620 regarding radio there are dozens and under each option requires correctly configure the kernel and calibrate radio modules, otherwise you can expect any problems up to the failure of the hardware. Unfortunately implement Autodetect presence / absence of the same PA / LNA is not possible as well as to take into account the individual features of an instance without calibration.

The new branch is synchronized with the 5.0.0.0 version of the original SDK. Based on 3.4 LTS branch core (plus a lot of backports of more recent kernels). It includes all of the latest patches, and current drivers. Just ported all modes of optimization and offloada available RTNL branch.

Currently Wive-NG-MT has the status of a stable release.

Officially supports only SNR-CPE-W4N revM and dual-band version of the SNR-CPE-MD1.

SNR-CPE-W4N revM configuration MT7620N / H rev206 8Mb FLASH 64MB DDR1 RAM without USB. available in the shop. Dual-band version (MT7620A / H rev206 + MT7610NE 8Mb FLASH 64MB DDR2 RAM) is running in production and is available for pre-order.

Discussion devices SNR by MT762x (including tests, bug reports, the development and operation) http://forum.nag.ru
Description from the manufacturer http://shop.nag.ru
Availability of devices in stock, as well as price mozho clarify at http://shop.nag.ru
For all matters related to the acquisition devices SNR-CPE-W4N-MT, please contact sales@nag.ru
Support issues (bug reports, queries and other functionality) - support@nag.ru
Questions customization and other non-technical side, or sales - prov@nag.ru

When ordering the devices you support a series of firmware Wive-NG. It allows customers to invest in the further development of projects, but I do not get distracted and continue to work on improving the software.

Currently Wive-NG-MT supports the entire set (or even more) options that were Wive-NG-RTNL. Suitable for use with L2TP / PPTP / PPPOE / IPOE / KABINET AUTH option is available in the network, on any of the protocols used speed is limited only by the speed of the Ethernet ports on the switch 100Mbps FDX wire. In limited wifi 802.11N 2T2R 40MHz SGI in the 2.4GHz (for MT7620) and 802.11AC 1T1R SGI 80MHz (for MT7610NE) modes (in a relatively pure air with the appropriate customer that 2.4GHz 5GHz that are achievable within the speed 130-140Mbit / c total RX + TX for each range).

Also added support for IPV6 (while only DHPCv6 + RA uplink or 6to4, including options over the virtual**, the other options would be added at the request of the organization after the test stand).

Plans for further development, as well as many other information you always find on the forum.

If there is willing to help in rewriting WebUI - welcome. If you need some kind of functional and you definitely can technically correct to describe what you need and how it should work - you are always welcome in support@nag.ru

The current assembly.
The initial text.

Sections

ivyswen

占个2楼备用