|
|
大大，每次断电后再开机就启动失败了，换了很多U盘都这样
Jun 17 23:03:16 syslogd started: BusyBox v1.24.2
Jun 17 23:03:16 RT-AC54U: firmware version: 3.4.3.9-099_7-06-17
Jun 17 23:03:16 kernel: klogd started: BusyBox v1.24.2 (2017-06-17 12:38:56 CST)
Jun 17 23:03:16 kernel: Linux version 3.4.113 (padavan@hms) (gcc version 4.4.7 (GCC) ) #2 Sat Jun 17 16:37:00 CST 2017
Jun 17 23:03:16 kernel: MediaTek SoC: MT7620A, RevID: 0206, RAM: DDR2, XTAL: 20MHz
Jun 17 23:03:16 kernel: CPU/OCP/SYS frequency: 580/193/193 MHz
Jun 17 23:03:16 kernel: CPU revision is: 00019650 (MIPS 24KEc)
Jun 17 23:03:16 kernel: Determined physical RAM map:
Jun 17 23:03:16 kernel: memory: 08000000 @ 00000000 (usable)
Jun 17 23:03:16 kernel: Zone PFN ranges:
Jun 17 23:03:16 kernel: Normal 0x00000000 -> 0x00008000
Jun 17 23:03:16 kernel: Movable zone start PFN for each node
Jun 17 23:03:16 kernel: Early memory PFN ranges
Jun 17 23:03:16 kernel: 0: 0x00000000 -> 0x00008000
Jun 17 23:03:16 kernel: On node 0 totalpages: 32768
Jun 17 23:03:16 kernel: free_area_init_node: node 0, pgdat 8034c990, node_mem_map 81000000
Jun 17 23:03:16 kernel: Normal zone: 256 pages used for memmap
Jun 17 23:03:16 kernel: Normal zone: 0 pages reserved
Jun 17 23:03:16 kernel: Normal zone: 32512 pages, LIFO batch:7
Jun 17 23:03:16 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jun 17 23:03:16 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jun 17 23:03:16 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jun 17 23:03:16 kernel: pcpu-alloc: [0] 0
Jun 17 23:03:16 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Jun 17 23:03:16 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Jun 17 23:03:16 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Jun 17 23:03:16 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jun 17 23:03:16 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jun 17 23:03:16 kernel: Writing ErrCtl register=0003861e
Jun 17 23:03:16 kernel: Readback ErrCtl register=0003861e
Jun 17 23:03:16 kernel: Memory: 126240k/131072k available (2844k kernel code, 4832k reserved, 536k data, 200k init, 0k highmem)
Jun 17 23:03:16 kernel: NR_IRQS:40
Jun 17 23:03:16 kernel: console [ttyS0] enabled
Jun 17 23:03:16 kernel: Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
Jun 17 23:03:16 kernel: pid_max: default: 32768 minimum: 301
Jun 17 23:03:16 kernel: Mount-cache hash table entries: 512
Jun 17 23:03:16 kernel: NET: Registered protocol family 16
Jun 17 23:03:16 kernel: bio: create slab <bio-0> at 0
Jun 17 23:03:16 kernel: SCSI subsystem initialized
Jun 17 23:03:16 kernel: usbcore: registered new interface driver usbfs
Jun 17 23:03:16 kernel: usbcore: registered new interface driver hub
Jun 17 23:03:16 kernel: usbcore: registered new device driver usb
Jun 17 23:03:16 kernel: PCI host bridge to bus 0000:00
Jun 17 23:03:16 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Jun 17 23:03:16 kernel: pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff]
Jun 17 23:03:16 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Jun 17 23:03:16 kernel: pci 0000:00:00.0: supports D1
Jun 17 23:03:16 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Jun 17 23:03:16 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jun 17 23:03:16 kernel: pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Jun 17 23:03:16 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Jun 17 23:03:16 kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jun 17 23:03:16 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jun 17 23:03:16 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
Jun 17 23:03:16 kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
Jun 17 23:03:16 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
Jun 17 23:03:16 kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
Jun 17 23:03:16 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
Jun 17 23:03:16 kernel: pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
Jun 17 23:03:16 kernel: pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
Jun 17 23:03:16 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Jun 17 23:03:16 kernel: Switching to clocksource MIPS
Jun 17 23:03:16 kernel: NET: Registered protocol family 2
Jun 17 23:03:16 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun 17 23:03:16 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jun 17 23:03:16 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jun 17 23:03:16 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jun 17 23:03:16 kernel: TCP: reno registered
Jun 17 23:03:16 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Jun 17 23:03:16 kernel: NET: Registered protocol family 1
Jun 17 23:03:16 kernel: PCI: CLS 32 bytes, default 32
Jun 17 23:03:16 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jun 17 23:03:16 kernel: msgmni has been set to 246
Jun 17 23:03:16 kernel: io scheduler noop registered
Jun 17 23:03:16 kernel: io scheduler bfq registered (default)
Jun 17 23:03:16 kernel: BFQ I/O-scheduler version: v7r7
Jun 17 23:03:16 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jun 17 23:03:16 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
Jun 17 23:03:16 kernel: Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 0058171D
Jun 17 23:03:16 kernel: loop: module loaded
Jun 17 23:03:16 kernel: Ralink SPI flash driver, SPI clock: 48MHz
Jun 17 23:03:16 kernel: SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Jun 17 23:03:16 kernel: Creating 7 MTD partitions on "raspi":
Jun 17 23:03:16 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Jun 17 23:03:16 kernel: 0x000000030000-0x000000040000 : "Config"
Jun 17 23:03:16 kernel: 0x000000040000-0x000000050000 : "Factory"
Jun 17 23:03:16 kernel: 0x000000050000-0x000000186600 : "Kernel"
Jun 17 23:03:16 kernel: 0x000000186600-0x000000f00000 : "RootFS"
Jun 17 23:03:16 kernel: 0x000000f00000-0x000001000000 : "Storage"
Jun 17 23:03:16 kernel: 0x000000050000-0x000000f00000 : "Firmware_Stub"
Jun 17 23:03:16 kernel: tun: Universal TUN/TAP device driver, 1.6
Jun 17 23:03:16 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jun 17 23:03:16 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
Jun 17 23:03:16 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
Jun 17 23:03:16 kernel: raeth: NAPI support, weight 32
Jun 17 23:03:16 kernel: raeth: Byte Queue Limits (BQL) support
Jun 17 23:03:16 kernel: PPP generic driver version 2.4.2
Jun 17 23:03:16 kernel: PPP MPPE Compression module registered
Jun 17 23:03:16 kernel: NET: Registered protocol family 24
Jun 17 23:03:16 kernel: p p t p driver version 0.8.5
Jun 17 23:03:16 kernel: usbcore: registered new interface driver libusual
Jun 17 23:03:16 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
Jun 17 23:03:16 kernel: xt_time: kernel timezone is -0000
Jun 17 23:03:16 kernel: Bridge firewalling registered
Jun 17 23:03:16 kernel: gre: GRE over IPv4 demultiplexor driver
Jun 17 23:03:16 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 17 23:03:16 kernel: TCP: cubic registered
Jun 17 23:03:16 kernel: NET: Registered protocol family 10
Jun 17 23:03:16 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 17 23:03:16 kernel: IPv6 over IPv4 tunneling driver
Jun 17 23:03:16 kernel: NET: Registered protocol family 17
Jun 17 23:03:16 kernel: L2TP core driver, V2.0
Jun 17 23:03:16 kernel: PPPoL2TP kernel driver, V2.0
Jun 17 23:03:16 kernel: 8021q: 802.1Q VLAN Support v1.8
Jun 17 23:03:16 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Jun 17 23:03:16 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Jun 17 23:03:16 kernel: Freeing unused kernel memory: 200k freed
Jun 17 23:03:16 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jun 17 23:03:16 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
Jun 17 23:03:16 kernel: APSoC AP Driver version: 2.7.2.0
Jun 17 23:03:16 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Jun 17 23:03:16 kernel: MT76x2 AP Driver version: 3.0.5.0
Jun 17 23:03:16 kernel: usbcore: registered new interface driver usblp
Jun 17 23:03:16 kernel: Initializing USB Mass Storage driver...
Jun 17 23:03:16 kernel: usbcore: registered new interface driver usb-storage
Jun 17 23:03:16 kernel: USB Mass Storage support registered.
Jun 17 23:03:16 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun 17 23:03:16 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller
Jun 17 23:03:16 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jun 17 23:03:16 kernel: ehci-platform ehci-platform: irq 26, io mem 0x101c0000
Jun 17 23:03:16 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Jun 17 23:03:16 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jun 17 23:03:16 kernel: usb usb1: Product: Generic Platform EHCI Controller
Jun 17 23:03:16 kernel: usb usb1: Manufacturer: Linux 3.4.113 ehci_hcd
Jun 17 23:03:16 kernel: usb usb1: SerialNumber: ehci-platform
Jun 17 23:03:16 kernel: hub 1-0:1.0: USB hub found
Jun 17 23:03:16 kernel: hub 1-0:1.0: 1 port detected
Jun 17 23:03:16 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 17 23:03:16 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller
Jun 17 23:03:16 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Jun 17 23:03:16 kernel: ohci-platform ohci-platform: irq 26, io mem 0x101c1000
Jun 17 23:03:16 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jun 17 23:03:16 kernel: usb usb2: Product: Generic Platform OHCI Controller
Jun 17 23:03:16 kernel: usb usb2: Manufacturer: Linux 3.4.113 ohci_hcd
Jun 17 23:03:16 kernel: usb usb2: SerialNumber: ohci-platform
Jun 17 23:03:16 kernel: hub 2-0:1.0: USB hub found
Jun 17 23:03:16 kernel: hub 2-0:1.0: 1 port detected
Jun 17 23:03:16 kernel: usb 1-1: new high-speed USB device number 2 using ehci-platform
Jun 17 23:03:16 kernel: usb 1-1: New USB device found, idVendor=058f, idProduct=6387
Jun 17 23:03:16 kernel: usb 1-1: Product: Mass Storage
Jun 17 23:03:16 kernel: usb 1-1: Manufacturer: Generic
Jun 17 23:03:16 kernel: usb 1-1: SerialNumber: 25991BAA
Jun 17 23:03:16 kernel: scsi0 : usb-storage 1-1:1.0
Jun 17 23:03:16 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Jun 17 23:03:16 kernel: raeth: HW VLAN TX offload enabled
Jun 17 23:03:16 kernel: raeth: HW Scatter/Gather TX offload enabled
Jun 17 23:03:16 kernel: mtk_esw - hw bridge: W|LLLL
Jun 17 23:03:16 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Jun 17 23:03:16 kernel: device eth2.1 entered promiscuous mode
Jun 17 23:03:16 kernel: device eth2 entered promiscuous mode
Jun 17 23:03:17 kernel: mtk_esw: Link Status Changed - Port WAN Link Up
Jun 17 23:03:19 kernel: scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
Jun 17 23:03:19 kernel: sd 0:0:0:0: [sda] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
Jun 17 23:03:19 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 17 23:03:19 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 17 23:03:19 kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Jun 17 23:03:19 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jun 17 23:03:19 kernel: sda: sda1
Jun 17 23:03:19 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jun 17 23:03:19 usb_modeswitch: no rule for device 058f:6387
Jun 17 23:03:19 automount: /sbin/automount.sh sda1 AiDisk_a1
Jun 17 23:03:19 automount: mount device /dev/sda1 (ntfs) to /media/UDISK @@@@@ /media/AiDisk_a1
Jun 17 23:03:19 kernel: ufsd: driver (8.6, Jun 17 2017 10:47:20, LBD=ON, delalloc, ioctl, bdi) loaded at 86b80000
Jun 17 23:03:19 kernel: NTFS (with native replay) support included
Jun 17 23:03:19 kernel: optimized: speed
Jun 17 23:03:19 kernel: Built_for__Asus_n65u_2012-03-29
Jun 17 23:03:20 kernel: ufsd: use builtin utf8 instead of kernel utf8
Jun 17 23:03:20 kernel: ufsd: sda1 without journal
Jun 17 23:03:20 opt-mount.sh: started [/dev/sda1 /media/UDISK]
Jun 17 23:03:21 kernel: ch1 bssid=34:bd:f9:56:2a:2d
Jun 17 23:03:22 kernel: ch1 bssid=28:f3:66:ba:f2:88
Jun 17 23:03:22 kernel: ch1 bssid=0c:72:2c:64:d3:2c
Jun 17 23:03:22 kernel: ch1 bssid=f6:6a:92:2e:aa:c0
Jun 17 23:03:22 kernel: ch1 bssid=c8:3a:35:11:29:e8
Jun 17 23:03:22 kernel: ch2 bssid=74:c3:30:d4:27:22
Jun 17 23:03:22 kernel: ch2 bssid=d8:c8:e9:99:b5:b0
Jun 17 23:03:22 kernel: ch2 bssid=a4:56:02:04:6d:3d
Jun 17 23:03:22 kernel: ch6 bssid=14:75:90:cc:f1:d0
Jun 17 23:03:22 kernel: ch6 bssid=bc:d1:77:ca:0c:b2
Jun 17 23:03:22 kernel: ch6 bssid=34:96:72:af:20:b3
Jun 17 23:03:22 kernel: ch6 bssid=20:dc:e6:8f:91:c0
Jun 17 23:03:22 kernel: ch6 bssid=20:dc:e6:b7:e3:f6
Jun 17 23:03:22 kernel: ch6 bssid=08:10:79:bc:9d:46
Jun 17 23:03:22 kernel: ch6 bssid=24:69:68:ae:f3:a0
Jun 17 23:03:22 kernel: ch8 bssid=c8:3a:35:22:a5:08
Jun 17 23:03:22 kernel: ch8 bssid=90:94:e4:3b:02:9c
Jun 17 23:03:22 kernel: ch11 bssid=d8:15:0d:ef:4d:5a
Jun 17 23:03:22 kernel: ch11 bssid=e4:d3:32:0a:b5:08
Jun 17 23:03:22 kernel: ch11 bssid=f4:83:cd:e7:77:c6
Jun 17 23:03:22 kernel: ch11 bssid=d8:15:0d:54:52:0e
Jun 17 23:03:22 kernel: ch11 bssid=8c:a6:df:7d:86:6f
Jun 17 23:03:22 kernel: ch11 bssid=dc:ef:09:07:63:e8
Jun 17 23:03:22 kernel: ch11 bssid=f4:83:cd:a2:ad:f7
Jun 17 23:03:22 kernel: ch11 bssid=50:bd:5f:e9:1a:5e
Jun 17 23:03:22 kernel: ch11 bssid=78:a1:06:95:80:3e
Jun 17 23:03:22 kernel: ch13 bssid=f0:b4:29:7d:8c:4f
Jun 17 23:03:22 kernel: =====================================================
Jun 17 23:03:22 kernel: Channel 1 : Dirty = 446, False CCA = 233, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 2 : Dirty = 510, False CCA = 182, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 3 : Dirty = 404, False CCA = 15, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 4 : Dirty = 440, False CCA = 93, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 5 : Dirty = 444, False CCA = 113, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 6 : Dirty = 606, False CCA = 140, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 7 : Dirty = 468, False CCA = 86, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 8 : Dirty = 552, False CCA = 99, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 9 : Dirty = 504, False CCA = 578, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 10 : Dirty = 508, False CCA = 67, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 11 : Dirty = 706, False CCA = 108, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:22 kernel: Channel 12 : Dirty = 360, False CCA = 500, Busy Time = 0, Skip Channel = TRUE
Jun 17 23:03:22 kernel: Channel 13 : Dirty = 322, False CCA = 53, Busy Time = 0, Skip Channel = TRUE
Jun 17 23:03:22 kernel: =====================================================
Jun 17 23:03:22 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 13
Jun 17 23:03:22 kernel: Min Dirty = 322
Jun 17 23:03:22 kernel: ExChannel = 9 , 0
Jun 17 23:03:22 kernel: BW = 40
Jun 17 23:03:22 kernel: device ra0 entered promiscuous mode
Jun 17 23:03:24 kernel: =====================================================
Jun 17 23:03:24 kernel: Channel 149 : Dirty = 0, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:24 kernel: Channel 153 : Dirty = 0, False CCA = 3, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:24 kernel: Channel 157 : Dirty = 0, False CCA = 209, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:24 kernel: Channel 161 : Dirty = 0, False CCA = 36, Busy Time = 0, Skip Channel = FALSE
Jun 17 23:03:24 kernel: Channel 165 : Dirty = 0, False CCA = 13, Busy Time = 0, Skip Channel = TRUE
Jun 17 23:03:24 kernel: =====================================================
Jun 17 23:03:24 kernel: Rule 3 CCA value : Randomly Select ==> Select Channel 149
Jun 17 23:03:24 kernel: device rai0 entered promiscuous mode
Jun 17 23:03:25 kernel: br0: port 3(rai0) entered forwarding state
Jun 17 23:03:25 kernel: br0: port 2(ra0) entered forwarding state
Jun 17 23:03:25 kernel: br0: port 1(eth2.1) entered forwarding state
Jun 17 23:03:25 kernel: mtk_esw - software IGMP/MLD snooping: 1
Jun 17 23:03:25 dnsmasq[484]: started, version 2.76 cachesize 1024
Jun 17 23:03:25 dnsmasq[484]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jun 17 23:03:25 dnsmasq-dhcp[484]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 1d
Jun 17 23:03:25 dnsmasq-dhcp[484]: DHCP, sockets bound exclusively to interface br0
Jun 17 23:03:25 dnsmasq[484]: read /etc/hosts - 3 addresses
Jun 17 23:03:25 dnsmasq[484]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun 17 23:03:25 dnsmasq-dhcp[484]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun 17 23:03:25 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Jun 17 23:03:25 RT-AC54U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Jun 17 23:03:25 RT-AC54U: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Jun 17 23:03:25 RT-AC54U: Hardware NAT/Routing: IPv6 routes offload - OFF
Jun 17 23:03:25 【WebUI】: 稍等后启动相关设置
Jun 17 23:03:26 【QOS】: QOS 没有开启或闪存不足缺模块
Jun 17 23:03:26 crond[581]: crond (busybox 1.24.2) started, log level 8
Jun 17 23:03:26 【防火墙规则】: 脚本完成
Jun 17 23:03:27 DHCP WAN Client: starting on eth2.2 ...
Jun 17 23:03:27 DHCP WAN Client: bound (eth2.2), IP: 192.168.100.5, GW: 192.168.100.1, lease time: 259200
Jun 17 23:03:27 RT-AC54U: WAN up (eth2.2)
Jun 17 23:03:27 dnsmasq[484]: read /etc/hosts - 3 addresses
Jun 17 23:03:27 dnsmasq[484]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun 17 23:03:27 dnsmasq-dhcp[484]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun 17 23:03:27 kernel: br0: port 3(rai0) entered forwarding state
Jun 17 23:03:27 kernel: br0: port 2(ra0) entered forwarding state
Jun 17 23:03:27 kernel: br0: port 1(eth2.1) entered forwarding state
Jun 17 23:03:27 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【eth2.2】, WAN IP:【192.168.100.5】
Jun 17 23:03:27 httpd[626]: Server listening port 80 (HTTP).
Jun 17 23:03:28 dropbear[630]: Running in background
Jun 17 23:03:28 miniupnpd[632]: version 2.0 starting UPnP-IGD ext if eth2.2 BOOTID=1497711808
Jun 17 23:03:28 miniupnpd[632]: HTTP listening on port 25428
Jun 17 23:03:28 kernel: Netfilter messages via NETLINK v0.30.
Jun 17 23:03:28 kernel: ip_set: protocol 6
Jun 17 23:03:28 【WebUI】: 稍等后启动相关设置
Jun 17 23:03:29 【QOS】: QOS 没有开启或闪存不足缺模块
Jun 17 23:03:29 crond[756]: crond (busybox 1.24.2) started, log level 8
Jun 17 23:03:29 【防火墙规则】: 脚本完成
Jun 17 23:03:35 Samba Server: daemon is started
Jun 17 23:03:35 opt-start.sh: call /opt/etc/init.d
Jun 17 23:03:37 NTP Client: Synchronizing time to ntp1.aliyun.com.
Jun 17 23:25:24 NTP Client: System time changed, offset: 1305.493310s
Jun 17 23:25:24 automount: /sbin/automount.sh sda1 AiDisk_a1
Jun 17 23:25:24 automount: mount device /dev/sda1 (ntfs) to /media/UDISK @@@@@ /media/AiDisk_a1
Jun 17 23:25:24 usb_modeswitch: no rule for device 058f:6387
Jun 17 23:25:29 Samba Server: daemon is started
Jun 17 23:25:34 Samba Server: daemon is started
Jun 17 23:25:39 【自定义脚本0】: 脚本完成
Jun 17 23:25:39 dnsmasq[484]: exiting on receipt of SIGTERM
Jun 17 23:25:39 dnsmasq[1490]: started, version 2.76 cachesize 1024
Jun 17 23:25:39 dnsmasq[1490]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jun 17 23:25:39 dnsmasq-dhcp[1490]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 1d
Jun 17 23:25:39 dnsmasq-dhcp[1490]: DHCP, sockets bound exclusively to interface br0
Jun 17 23:25:39 dnsmasq[1490]: read /etc/hosts - 3 addresses
Jun 17 23:25:39 dnsmasq[1490]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jun 17 23:25:39 dnsmasq-dhcp[1490]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jun 17 23:25:40 【网络检测】: 互联网状态:12, 经过时间:ts.
Jun 17 23:25:40 【连接 AP】: 12秒后, 自动搜寻 ap
Jun 17 23:25:43 【WebUI】: 稍等后启动相关设置
Jun 17 23:25:43 crond[1584]: crond (busybox 1.24.2) started, log level 8
Jun 17 23:25:52 【连接 AP】: 脚本完成
Jun 17 23:25:57 【script】: 脚本检查更新
Jun 17 23:25:59 【script】: 脚本已经最新
Jun 17 23:25:59 【opt】: opt 挂载正常：/media/UDISK
Jun 17 23:26:01 【libmd5_恢复】: 正在对比 /opt/lib/ 文件 md5
Jun 17 23:26:58 【libmd5_恢复】: md5对比，完成！
Jun 17 23:26:58 [LNMP]: start
Jun 17 23:26:58 【LNMP】: 初始化
Jun 17 23:26:58 【LNMP】: default路径：/opt/www/default 端口：81
Jun 17 23:26:58 【LNMP】: default ：192.168.123.1:81
Jun 17 23:26:58 【LNMP】: phpmyadmin路径：/opt/www/phpmyadmin 端口：85
Jun 17 23:26:58 【LNMP】: phpmyadmin ：192.168.123.1:85
Jun 17 23:26:58 【LNMP】: wifidog_server路径：/opt/www/wifidog_server 端口：84
Jun 17 23:26:58 【LNMP】: wifidog_server ：192.168.123.1:84
Jun 17 23:26:58 [LNMP-mysqld]: start
Jun 17 23:26:58 admin: Started mysqld from .
Jun 17 23:26:58 [LNMP-php-fpm]: start
Jun 17 23:26:58 admin: Started php-fpm from .
Jun 17 23:26:59 [LNMP-nginx]: start
Jun 17 23:26:59 [shellinabox]: start
Jun 17 23:26:59 [shellinabox]: stop
Jun 17 23:26:59 admin: Started lcd4linux from .
Jun 17 23:26:59 【自定义脚本】: 脚本完成
Jun 17 23:26:59 【运行路由器启动后】: 脚本完成
Jun 17 23:26:59 bwmon[13263]: Rouzom-PC join your network: IP: 192.168.123.168, MAC: 00:e0:4c:61:32:1e!
Jun 17 23:26:59 bwmon[13263]: UNKNOW join your network: IP: 192.168.100.1, MAC: e0:97:96:d8:80:68!
Jun 17 23:27:00 【自定义脚本0】: 脚本完成
Jun 17 23:27:00 【WebUI】: UI 开关遍历状态监测
Jun 17 23:27:00 LCD4Linux[13247]: stat(/etc/storage/display_lcd4linux_script.sh) failed: No such file or directory
Jun 17 23:27:00 LCD4Linux[13247]: Error reading configuration. Exit!
Jun 17 23:27:00 【QOS】: QOS 没有开启或闪存不足缺模块
Jun 17 23:27:00 【防火墙规则】: 脚本完成
Jun 17 23:27:02 【opt】: opt 挂载正常：/media/UDISK
Jun 17 23:27:08 [LNMP-mysqld]: stop
Jun 17 23:27:08 [LNMP-php-fpm]: stop
Jun 17 23:27:09 [LNMP-nginx]: stop
Jun 17 23:27:09 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:09 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:09 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:09 【LNMP】: 运行 nginx+php+mysql 环境
Jun 17 23:27:09 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84
Jun 17 23:27:09 【LNMP】: wifidog_server:192.168.123.1:84
Jun 17 23:27:09 [LNMP]: start
Jun 17 23:27:09 【LNMP】: 初始化
Jun 17 23:27:09 【LNMP】: default路径：/opt/www/default 端口：81
Jun 17 23:27:09 【LNMP】: default ：192.168.123.1:81
Jun 17 23:27:10 【LNMP】: phpmyadmin路径：/opt/www/phpmyadmin 端口：85
Jun 17 23:27:10 【LNMP】: phpmyadmin ：192.168.123.1:85
Jun 17 23:27:10 【LNMP】: wifidog_server路径：/opt/www/wifidog_server 端口：84
Jun 17 23:27:10 【LNMP】: wifidog_server ：192.168.123.1:84
Jun 17 23:27:10 [LNMP-mysqld]: restart
Jun 17 23:27:10 admin: Started mysqld from .
Jun 17 23:27:10 [LNMP-php-fpm]: restart
Jun 17 23:27:10 admin: Started php-fpm from .
Jun 17 23:27:10 [LNMP-nginx]: restart
Jun 17 23:27:11 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:11 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:11 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:16 【LNMP】: 启动失败, 注意检查端口是否有冲突,程序是否下载完整,10 秒后自动尝试重新启动
Jun 17 23:27:26 [LNMP-mysqld]: stop
Jun 17 23:27:27 crond[15174]: crond (busybox 1.24.2) started, log level 8
Jun 17 23:27:27 [LNMP-php-fpm]: stop
Jun 17 23:27:28 [LNMP-nginx]: stop
Jun 17 23:27:28 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:28 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:28 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:28 【LNMP】: 运行 nginx+php+mysql 环境
Jun 17 23:27:28 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84
Jun 17 23:27:28 【LNMP】: wifidog_server:192.168.123.1:84
Jun 17 23:27:28 [LNMP]: start
Jun 17 23:27:28 【LNMP】: 初始化
Jun 17 23:27:28 【LNMP】: default路径：/opt/www/default 端口：81
Jun 17 23:27:28 【LNMP】: default ：192.168.123.1:81
Jun 17 23:27:28 【LNMP】: phpmyadmin路径：/opt/www/phpmyadmin 端口：85
Jun 17 23:27:28 【LNMP】: phpmyadmin ：192.168.123.1:85
Jun 17 23:27:28 【LNMP】: wifidog_server路径：/opt/www/wifidog_server 端口：84
Jun 17 23:27:28 【LNMP】: wifidog_server ：192.168.123.1:84
Jun 17 23:27:28 [LNMP-mysqld]: restart
Jun 17 23:27:28 admin: Started mysqld from .
Jun 17 23:27:28 [LNMP-php-fpm]: restart
Jun 17 23:27:29 admin: Started php-fpm from .
Jun 17 23:27:29 [LNMP-nginx]: restart
Jun 17 23:27:30 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:30 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:30 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:35 【LNMP】: 启动失败, 注意检查端口是否有冲突,程序是否下载完整,10 秒后自动尝试重新启动
Jun 17 23:27:45 [LNMP-mysqld]: stop
Jun 17 23:27:45 [LNMP-php-fpm]: stop
Jun 17 23:27:46 [LNMP-nginx]: stop
Jun 17 23:27:46 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:46 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:46 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:46 【LNMP】: 运行 nginx+php+mysql 环境
Jun 17 23:27:46 【LNMP】: wifidog_server 路径:/opt/www/wifidog_server 端口:84
Jun 17 23:27:47 【LNMP】: wifidog_server:192.168.123.1:84
Jun 17 23:27:47 [LNMP]: start
Jun 17 23:27:47 【LNMP】: 初始化
Jun 17 23:27:47 【LNMP】: default路径：/opt/www/default 端口：81
Jun 17 23:27:47 【LNMP】: default ：192.168.123.1:81
Jun 17 23:27:47 【LNMP】: phpmyadmin路径：/opt/www/phpmyadmin 端口：85
Jun 17 23:27:47 【LNMP】: phpmyadmin ：192.168.123.1:85
Jun 17 23:27:47 【LNMP】: wifidog_server路径：/opt/www/wifidog_server 端口：84
Jun 17 23:27:47 【LNMP】: wifidog_server ：192.168.123.1:84
Jun 17 23:27:47 [LNMP-mysqld]: restart
Jun 17 23:27:47 admin: Started mysqld from .
Jun 17 23:27:47 [LNMP-php-fpm]: restart
Jun 17 23:27:47 admin: Started php-fpm from .
Jun 17 23:27:47 [LNMP-nginx]: restart
Jun 17 23:27:48 【LNMP】: /opt 已用数据空间7%/100%
Jun 17 23:27:48 【LNMP】: /opt 已用节点空间0%/100%
Jun 17 23:27:48 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Jun 17 23:27:53 【LNMP】: 启动失败, 注意检查端口是否有冲突,程序是否下载完整,10 秒后自动尝试重新启动
Jun 17 23:28:03 【lnmp】: 多次尝试启动失败，等待【19分钟】后自动尝试重新启动
Jun 17 23:31:22 nmbd[1446]: [2017/06/17 23:31:22, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(392)
Jun 17 23:31:22 nmbd[1446]: Samba name server RT-AC54U is now a local master browser for workgroup WORKGROUP on subnet 192.168.123.1
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2017-3-18 20:22
显身卡
