求助:Mercury MW300r Ver6.0 MT7620n硬改16闪64内 卡在breed

逐雪的风

Mercury MW300r Ver6.0,MT7620n 硬改16闪64内
Breed版本 Ver1.0 r833 2016-01-23
固件试过明月永在Openwrt 极路由极壹S HC5661 爱快ikuai小白
一次改了十多个,就三个相同问题,Breed页面下正常,16闪64内均已识别,固件刷新页面也无报错.
始终自动进入breed不引导固件.
TTL日志:
Boot and Recovery Environment for Embedded Devices
Copyright (C) 2016 HackPascal <hackpascal@gmail.com>
Build date 2016-01-23 [git-0053995]
Version 1.0 (r833)

DRAM: 64MB
Platform: MediaTek MT7620N ver 2, eco 3
Board: Reference design
Clocks: CPU: 600MHz, Bus: 200MHz
Flash: Winbond W25Q128 (16MB) on rt2880-spi
rt2880-eth: Using MAC address 00:0c:43:76:20:77
eth0: MediaTek MT7620N built-in 5-port 10/100M switch

Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0   

Trying to boot firmware from 0x00050000 in flash bank 0 ...
Reading data into memory ...
U-Boot firmware image header detected.
    Image Name:   HC5661
    Data Size:    1082509 Bytes
    Load Address: 80000000
    Entry Point:  80000000
Uncompressing data (LZMA) ... ERROR: LzmaDecode.c, 534


Decoding error = 1

Starting breed built-in shell

breed>

?☕

v6这机器 除了用海蜘蛛固件。其他固件都有各种自重启自死机的状况。硬改了超过10个，全在吃灰。

maorong1234

我刷的华硕固件，比较正常啊，现在一直裸奔使用。

bojipc

换个内存芯片试试