9新原壳 64M USB 双5DBI天线 7231－4(降价10％ 出掉收工)

test181818

不多废话，上图。


这个是很新的原装壳了，保守点说也有9新了。


改成64M内存，加了USB，7805用的是插接封装，安装大散热器，既保证输出，又保证散热。


7805和散热器


CPU上加装大型散热器，天线换成足5DB的。


军工品质自恢复型保险丝

另有标准版改64M USB的，用普通的7805和小型散热器的。


同样是原壳，小型散热器，不过成色稍差一点，有少许刮痕。


挂上TOSHIBA的20G移动硬盘，按317的GHOST版配置。


DD USB 317 GHOST包

TTL启动信息
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fr Feb 23 20:55:54 CET 2007 (funnel@cyriax)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
CPU type 0x29007: 200MHz
Total memory: 0x4000000 bytes (64MB)

Total memory used by CFE:  0x80300000 - 0x8043CE00 (1297920)
Initialized Data:          0x80335B20 - 0x80339630 (15120)
BSS Area:                  0x80339630 - 0x8033AE00 (6096)
Local Heap:                0x8033AE00 - 0x8043AE00 (1048576)
Stack Area:                0x8043AE00 - 0x8043CE00 (8192)
Text (code) segment:       0x80300000 - 0x80335B20 (219936)
Boot area (physical):      0x0043D000 - 0x0047D000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-01-E3-0E-95-C4, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3920 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00029007, options: 0x0000004d
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4026 Wed Jul 22 08:32:52 CEST 2009
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:02.0 to 64
PCI: Setting latency timer of device 00:01.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4320
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2b74be
partition size = 2872320
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x00122c00-0x003e0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x003e0000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
starting Architecture code for broadcom
Booting device: Siemens SE505 v2
boardflags are 0x0388
  Vendor: TOSHIBA   Model: MK2006GAL         Rev: 0811
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 39063024 512-byte hdwr sectors (20000 MB)
sh: can't create /proc/switch/eth1/reset: nonexistent directory
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
Unlocking ddwrt ...
sorry, your unit does not support resetbutton feature

eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
br0: Bad file descriptor
br0: Bad file descriptor
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
vlan1: Setting MAC address to  00 01 e3 0e 95 c5.
SIOCGIFFLAGS: No such device
Key is a RSA key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
Key is a DSS key
Wrote key to '/tmp/root/.ssh/ssh_host_dss_key'
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,1)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,2)

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
start lighttpd ......
Starting web server: lighttpd
start samba ......
Starting nmbd:
Starting smbd:
start rtorrent ......

RESET后恢复64M的命令

nvram set sdram_config=0x0033
nvram set sdram_refresh=0x8040
nvram set sdram_init=0x0008
nvram set sdram_ncdl=0x0000
nvram commit
reboot

最后是价格
加强版 200
普通版 180
未改造（4M,16M），但是器件配齐（22R×2 15K×2 USB插座×1 470uf 35V ×1 22uf 35V×1 7805×1 自恢复保险丝×1 C731位置的电容×1 32M内存×2）. 160
这个只是针对老鸟的，新手就不要来了。

三档价格，有需要的自己选择。一共3台。成色都不错
只做一个TB链接，买的时候联系我，我改成对应的价格。

TB: http://item.taobao.com/auction/i ... caef5&x_id=0db2

test181818

机器是欧版的，原装欧标小接口5V 2A电源接口，现已经改成标准接口，配原装LINKSYS 12V 1A电源，如果只是挂U盘或者不挂移动硬盘的话，5V 2A的电源就足够了。

i6p

不错不错~~~~~~~~

永不消失的电波

有更大的图片发上来么？

test181818

有更大的图片发上来么？
永不消失的电波 发表于 2009-8-6 17:48

你要看哪部分？

test181818

自己来顶一下。

yxh921

不错不错~~~~~~~~我也想啊，就是嫌贝尔金大了点

gggggg

原壳哓..HAHA>..希望三台都是原壳..

test181818

原壳哓..HAHA>..希望三台都是原壳..
gggggg 发表于 2009-8-8 09:31

三台都是原壳的,成色比TAOBAO上说的那些8新的要好的多,加强版的壳子基本上就是全新的了.

i6p

再降10%就冲冲冲了~~~

test181818

再降10%就冲冲冲了~~~
i6p 发表于 2009-8-8 19:44

这个价格说实话也已经不错了，机器还是很新的，拿来的时候上面还有德国 百思买 的标签，基本上都是没有销售过就拿到中国来了。所以机器里面是全新的，只是表面有点运输痕迹而已。

maning_lks

加强版与普通版的区别？

test181818

加强版与普通版的区别？
maning_lks 发表于 2009-8-9 11:56

加强了USB供电和整体散热，天线从2DB升级到了足5DB

i6p

耐心的等那10%~~~~~~~~

test181818

加强版和未改造版已经被秒掉了，现在剩最后一个标准版的了。