问一个关于无线网桥的问题 网桥下级设备MAC地址的问题

shb110119

最近在折腾无线中继，并且不想生成下面子网的方案，手上一个品胜的音乐路由方案和703N一样的，刷了几个固件，发现OP好像是无法实现的，然后试过DD-WRT和石像鬼固件，都存在一个问题，发现接到网桥下方的客户端，在上级路由里上报的都是网桥的MAC地址，这样理论上是对上级路由的ARP攻击啊，有时候也存在上级路由访问那个网桥地址有时候访问不了，很像ARP攻击的情况。。这个问题有没有人发现，或者怎么解决的？

fyi2000

建议安装石像鬼(Gargoyle)，Client mode默认支持relayd (ARP-NAT)

无线客户端模式 - 客户端桥接模式 (使用relayd) [Old OpenWrt Wiki]

客户端桥接模式引发的问题

Transparent client bridging or bridged client mode is not possible with vanilla OpenWrt on all platforms except brcm-2.4 with the proprietary Broadcom driver. It is possible to achieve this goal by using WDS, the background is explained below.

There are 3rd-party patches to implement ARP-NAT for platforms other than brcm-2.4 but those are not part of OpenWrt. The Kamikaze based Gargoyle firmware has support for it but is not officially supported by the OpenWrt developers.

Routed Client with relayd (Pseudobridge) [Old OpenWrt Wiki]
TP-Link TL-WR703N - how to configure it as a wirelesss client - OpenWrt Forum Archive