350N刷错DD版本变砖

hellolilianghon

TTL信息如下，忘高手指点一下。我按照https://www.right.com.cn/forum/v ... mp;highlight=ttl%2B的方法尝试N次不行。

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Oct 30 23:22:44 CST 2006 (root@linux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI: Initializing host
PCI: Enabling CardBus
SB PCI init done

0x3c = 0x00000100
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network, rev 0x02)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
PCI bus 1 slot 0/0: vendor 0x14e4 product 0x4785 (host bridge, rev 0x02)
Initializing Devices.

No DPN
This is a Parallel Flash
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: _pci_map_mem: attempt to map 64-bit region tag =0x800 @ addr=18010004
PCI bus 0 slot 1/0: _pci_map_mem: addr=0x18010004   pa=0x18010000   pci_mem_space_pci_base=0x40000000   pci_mem_space=0x8000000
  mcfg = 000810fe
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80300000 - 0x803A7AB0 (686768)
Initialized Data:          0x8033C900 - 0x8033FCB0 (13232)
BSS Area:                  0x8033FCB0 - 0x80341AB0 (7680)
Local Heap:                0x80341AB0 - 0x803A5AB0 (409600)
Stack Area:                0x803A5AB0 - 0x803A7AB0 (8192)
Text (code) segment:       0x80300000 - 0x8033C900 (248064)
Boot area (physical):      0x003A8000 - 0x003E8000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [00:1C:10:17:655] in location 0
Nothing...

eou_key_init(): Find key pair in location 4
The eou device id is same
The eou public key is same
The eou private key is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
bcm5700: no firmware rendevous
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-1C-10-17-65-D5, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x6F3000     (7286784)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x9A8        (2472)  (0xBC0409A8)
  Offset2: 0x14B400     (1356800)       (0xBC18B400)
  Header CRC:    0x8CA9297A
  Calculate CRC: 0x8CA9297A
Image 1 is OK
Try to load image 1.
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Starting program at 0x80001000

xgg54321

按CTRL+C中止CFE启动，再在CFE中刷入固件即可。。

hellolilianghon

按CTRL+C中止CFE启动，再在CFE中刷入固件即可。。
xgg54321 发表于 2010-4-11 22:21

2# xgg54321


折腾了下,尝试了TTL和JTAG，由于无法弄回 DD-WRT,最后试了下原厂固件刷成功了。现在想刷DD，用了原厂升级不成功。用TFTP的话，显示“invalid password!!”请问有啥解决方法吗？