找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 1657|回复: 10

贝尔金4301变砖,求恢复方法

[复制链接]
发表于 2018-12-3 17:53 | 显示全部楼层 |阅读模式
本帖最后由 topzyj1 于 2018-12-3 17:55 编辑

手里有个贝尔金4301,原来刷的tomato。最近想换dd试试所以在dd上下了,最新的dd-wrt.v24-37305_NEWD-2_K2.6_mega(8M)。用ttl,在cfe下tftp升级的。升级完后变砖。长按复位键也无反应。

现在的问题,网线插wan和lan电脑都显示未连接,路由器上电时按wps键可进入CFE。但是,不像正常时CFE启动时会显示加载的IP地址及掩码。类似路由器配置丢失了一样。

请问各位大师何解。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2018-12-3 18:06 | 显示全部楼层
长按WPS键后此时的地址依旧是192.168.2.1,tftp上传即可,或者记得将网卡地址改成192.168.2.2,通过浏览器可以访问的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 22:06 来自手机 | 显示全部楼层
longlo 发表于 2018-12-3 18:06
长按WPS键后此时的地址依旧是192.168.2.1,tftp上传即可,或者记得将网卡地址改成192.168.2.2,通过浏览器 ...

现在的问题是,路由器上所有网口插电脑,均显示未连接,电脑网卡打叉号。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-12-3 22:08 | 显示全部楼层
按住前面那个按钮后不要放开,插入电源,直到网卡链接,如果这样还是无效的话,只能拆下FLASH写或者JTAG了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 22:27 来自手机 | 显示全部楼层
longlo 发表于 2018-12-3 22:08
按住前面那个按钮后不要放开,插入电源,直到网卡链接,如果这样还是无效的话,只能拆下FLASH写或者JTAG了

好的,过会外试试
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2018-12-3 22:28 | 显示全部楼层
有TTL先连上看看喽,不行联系俺。

点评

\0Decompressing...done Decompressing...done Init Arena Init Devs. Boot partition size = 131072(0x20000) CPU type 0x19740: 453MHz Tot mem: 65536 KBytes CFE mem: 0x80700000 - 0x8079CD10 (642  详情 回复 发表于 2018-12-3 22:46
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 22:32 来自手机 | 显示全部楼层
longlo 发表于 2018-12-3 22:08
按住前面那个按钮后不要放开,插入电源,直到网卡链接,如果这样还是无效的话,只能拆下FLASH写或者JTAG了

请问jtag线买那种,能不能给个淘宝链接

点评

CFE> help Available commands: et Broadcom Ethernet utility. nvram NVRAM utility. reboot Reboot. flash Update a flash memory device go  详情 回复 发表于 2018-12-3 22:49
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 22:46 | 显示全部楼层
路由摧手 发表于 2018-12-3 22:28
有TTL先连上看看喽,不行联系俺。

\0Decompressing...done
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes

CFE mem:    0x80700000 - 0x8079CD10 (642320)
Data:       0x80733D40 - 0x80736100 (9152)
BSS:        0x80736100 - 0x80736D10 (3088)
Heap:       0x80736D10 - 0x8079AD10 (409600)
Stack:      0x8079AD10 - 0x8079CD10 (8192)
Text:       0x80700000 - 0x80733D40 (212288)


Copying boot params.....
DONE


Bootloader version 1.08e boot_version 1.08e
Press space bar to cancel startup...
Startup canceled
CFE>
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 22:49 | 显示全部楼层
本帖最后由 topzyj1 于 2018-12-3 22:57 编辑
topzyj1 发表于 2018-12-3 22:32
请问jtag线买那种,能不能给个淘宝链接

CFE> help
Available commands:

et                  Broadcom Ethernet utility.
nvram               NVRAM utility.
reboot              Reboot.
flash               Update a flash memory device
go                  Verify and boot OS image.
boot                Load an executable file into memory and execute it
load                Load an executable file into memory without executing it
save                Save a region of memory to a remote file via TFTP
param               Set router parameters.
ifconfig            Configure the Ethernet interface
help                Obtain help for CFE commands

For more information about a command, enter 'help command-name'
*** command status = 0
\0Decompressing...done
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes

CFE mem:    0x80700000 - 0x8079CD10 (642320)
Data:       0x80733D40 - 0x80736100 (9152)
BSS:        0x80736100 - 0x80736D10 (3088)
Heap:       0x80736D10 - 0x8079AD10 (409600)
Stack:      0x8079AD10 - 0x8079CD10 (8192)
Text:       0x80700000 - 0x80733D40 (212288)


Copying boot params.....
DONE


以下,正常加电启动

Bootloader version 1.08e boot_version 1.08e
Press space bar to cancel startup...
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3916 bytes read
Entry at 0x80001000
Starting program at 0x80001000
Linux version 2.6.24.111 (root@linux) (gcc version 4.1.2) #4253 Wed Oct 10 03:10:03 CEST 2018
CPU revision is: 00019740
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal          0 ->    16384
  HighMem     16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Built 1 zonelists in Zone order.  Total pages: 16384
Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM4716 rev 1 at 453 MHz
Using 226.500 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 58696k/65536k available (3485k kernel code, 6780k reserved, 1366k data, 188k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: no core
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
F7D4301v1 GPIO Init
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
et_module_init: passivemode set to 0x0
PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000cb
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 196608
nvram size: 32768
Physically mapped flash: Filesystem type: squashfs, size=0x609c1a
partition size = 6368256
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00030000 : "cfe"
0x00030000-0x007f0000 : "linux"
0x0018d400-0x007a0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x007a0000-0x007f0000 : "ddwrt"
Found a 0MB  serial flash
sflash: found no supported devices
Broadcom Watchdog Timer: 0.07 initialized.
u32 classifier
    Performance counters on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length    128 bytes
PF_RING: ring slots       4096
PF_RING: sample rate      1 [1=no sampling]
PF_RING: capture TX       No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
decode 1f02
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
start service
starting Architecture code for broadcom
cannot open /dev/nvram
cannot open /dev/nvram
cannot open /dev/nvram
done
get_wl_instance doesnt return the right value 0
No such device
Booting device: Belkin F7D4301 / F7D8301 v1
roboswitch: Probing device eth0: No such device
roboswitch: Probing device eth1: No such device
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
cannot open /proc/switch/eth0/reset
cannot open /proc/switch/eth0/enable_vlan
cannot open /proc/switch/eth0/vlan/0/ports
cannot open /proc/switch/eth0/vlan/1/ports
cannot open /proc/switch/eth0/vlan/2/ports
cannot open /proc/switch/eth0/vlan/3/ports
[USB] checking...
/bin/sh: 3: Invalid argument
cannot open /proc/sys/net/ipv4/ip_conntrack_max
/bin/sh: 3: Invalid argument
cannot open /proc/sys/net/ipv4/ip_conntrack_max
cannot open /proc/sys/net/bridge/bridge-nf-call-arptables
cannot open /proc/sys/net/bridge/bridge-nf-call-ip6tables
cannot open /proc/sys/net/bridge/bridge-nf-call-iptables
get_wl_instance doesnt return the right value 0
wl:-i  down ->wl driver adapter not found
Write wireless mac fail : : No such device
wl:-i  up ->wl driver adapter not found
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
/bin/sh: can't create /sys/devices/virtual/net/br0/bridge/multicast_snooping: nonexistent directory
device br0 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
get_wl_instance doesnt return the right value 0
wl:-i  vlan_mode 0 ->wl driver adapter not found
get_wl_instance doesnt return the right value 0
wl:-i  radio on ->wl driver adapter not found
get_wl_instance doesnt return the right value 0
wl:-i  down ->wl driver adapter not found
get_wl_instance doesnt return the right value 0
wl:-i  up ->wl driver adapter not found
nf_conntrack_h323: Unknown symbol ip6_route_output
get_wl_instance doesnt return the right value 0
No such device
nf_nat_h323: Unknown symbol nat_callforwarding_hook
nf_nat_h323: Unknown symbol nat_t120_hook
nf_nat_h323: Unknown symbol set_h225_addr_hook
nf_nat_h323: Unknown symbol set_ras_addr_hook
nf_nat_h323: Unknown symbol nat_q931_hook
nf_nat_h323: Unknown symbol nat_rtp_rtcp_hook
nf_nat_h323: Unknown symbol set_sig_addr_hook
nf_nat_h323: Unknown symbol get_h225_addr
nf_nat_h323: Unknown symbol nat_h245_hook
nf_nat_h323: Unknown symbol set_h245_addr_hook
cannot open /proc/net/arp_spoofing_enable
start firewall6
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack_ipv6: Unknown symbol nf_ip6_checksum
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.3.7: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
get_wl_instance doesnt return the right value 0
wl:-i  radio on ->wl driver adapter not found
get_wl_instance doesnt return the right value 0
get_wl_instance doesnt return the right value 0
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device
Radio: 0 currently turned off
/bin/sh: 3: Invalid argument
get_wl_instance doesnt return the right value 0
/bin/sh: 3: Invalid argument
/opt/etc/init.d/rcS: No such file or directory
/jffs/etc/init.d/rcS: No such file or directory
/mmc/etc/init.d/rcS: No such file or directory
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
/bin/sh: 3: Invalid argument
get_wl_instance doesnt return the right value 0
No such device
get_wl_instance doesnt return the right value 0
No such device

最后在 get_wl_instance doesnt return the right value 0 No such device不断重复

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-3 23:46 | 显示全部楼层
的顶顶顶顶顶顶顶顶顶顶顶顶顶顶的的顶顶顶顶顶顶顶顶顶顶顶顶顶顶
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2018-12-4 21:19 | 显示全部楼层
顶起来,请老手帮忙给看看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 10:10

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表