刷好了老毛子，怎么进入breed啊？

lz_hui

搞了半天没弄明白，捅reset后插电一直闪的是黄灯。顺便问下我这个有坏块吗？

1. Jan  1 00:00:04 syslogd started: BusyBox v1.24.2
   
2. Jan  1 00:00:04 RM2100: firmware version: 3.4.3.9-099_20200527
   
3. Jan  1 00:00:04 kernel: klogd started: BusyBox v1.24.2 (2020-05-12 14:39:09 UTC)
   
4. Jan  1 00:00:04 kernel: Linux version 3.4.113 (padavan@hms) (gcc version 7.4.0 (crosstool-NG 1.24.0) ) #104 SMP Wed May 27 02:36:33 UTC 2020
   
5. Jan  1 00:00:04 kernel: MediaTek SoC: MT7621A, RevID: 0103, RAM: DDR3, XTAL: 40MHz
   
6. Jan  1 00:00:04 kernel: CPU/OCP/SYS frequency: 880/293/220 MHz
   
7. Jan  1 00:00:04 kernel: prom memory:128MB
   
8. Jan  1 00:00:04 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
   
9. Jan  1 00:00:04 kernel: Determined physical RAM map:
   
10. Jan  1 00:00:04 kernel:  memory: 08000000 [url=home.php?mod=space&uid=162986]@[/url] 00000000 (usable)
    
11. Jan  1 00:00:04 kernel: Zone PFN ranges:
    
12. Jan  1 00:00:04 kernel:   Normal   0x00000000 -> 0x00008000
    
13. Jan  1 00:00:04 kernel: Movable zone start PFN for each node
    
14. Jan  1 00:00:04 kernel: Early memory PFN ranges
    
15. Jan  1 00:00:04 kernel:     0: 0x00000000 -> 0x00008000
    
16. Jan  1 00:00:04 kernel: On node 0 totalpages: 32768
    
17. Jan  1 00:00:04 kernel: free_area_init_node: node 0, pgdat 80331560, node_mem_map 81000000
    
18. Jan  1 00:00:04 kernel:   Normal zone: 256 pages used for memmap
    
19. Jan  1 00:00:04 kernel:   Normal zone: 0 pages reserved
    
20. Jan  1 00:00:04 kernel:   Normal zone: 32512 pages, LIFO batch:7
    
21. Jan  1 00:00:04 kernel: Detected 3 available secondary CPU(s)
    
22. Jan  1 00:00:04 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
    
23. Jan  1 00:00:04 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    
24. Jan  1 00:00:04 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    
25. Jan  1 00:00:04 kernel: PERCPU: Embedded 7 pages/cpu @81103000 s5952 r8192 d14528 u32768
    
26. Jan  1 00:00:04 kernel: pcpu-alloc: s5952 r8192 d14528 u32768 alloc=8*4096
    
27. Jan  1 00:00:04 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    
28. Jan  1 00:00:04 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
    
29. Jan  1 00:00:04 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
    
30. Jan  1 00:00:04 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
    
31. Jan  1 00:00:04 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    
32. Jan  1 00:00:04 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    
33. Jan  1 00:00:04 kernel: Writing ErrCtl register=00004008
    
34. Jan  1 00:00:04 kernel: Readback ErrCtl register=00004008
    
35. Jan  1 00:00:04 kernel: Memory: 126180k/131072k available (2737k kernel code, 4892k reserved, 529k data, 248k init, 0k highmem)
    
36. Jan  1 00:00:04 kernel: Hierarchical RCU implementation.
    
37. Jan  1 00:00:04 kernel: NR_IRQS:72
    
38. Jan  1 00:00:04 kernel: MIPS GIC RevID: 3.0
    
39. Jan  1 00:00:04 kernel: Setting up vectored interrupts
    
40. Jan  1 00:00:04 kernel: console [ttyS0] enabled
    
41. Jan  1 00:00:04 kernel: Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
    
42. Jan  1 00:00:04 kernel: pid_max: default: 32768 minimum: 301
    
43. Jan  1 00:00:04 kernel: Mount-cache hash table entries: 512
    
44. Jan  1 00:00:04 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
    
45. Jan  1 00:00:04 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    
46. Jan  1 00:00:04 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    
47. Jan  1 00:00:04 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
    
48. Jan  1 00:00:04 kernel: Synchronize counters for CPU 1: done.
    
49. Jan  1 00:00:04 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
    
50. Jan  1 00:00:04 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    
51. Jan  1 00:00:04 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    
52. Jan  1 00:00:04 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
    
53. Jan  1 00:00:04 kernel: Synchronize counters for CPU 2: done.
    
54. Jan  1 00:00:04 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
    
55. Jan  1 00:00:04 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    
56. Jan  1 00:00:04 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    
57. Jan  1 00:00:04 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
    
58. Jan  1 00:00:04 kernel: Synchronize counters for CPU 3: done.
    
59. Jan  1 00:00:04 kernel: Brought up 4 CPUs
    
60. Jan  1 00:00:04 kernel: NET: Registered protocol family 16
    
61. Jan  1 00:00:04 kernel: FPU Affinity set after 4664 emulations
    
62. Jan  1 00:00:04 kernel: bio: create slab <bio-0> at 0
    
63. Jan  1 00:00:04 kernel: PCI host bridge to bus 0000:00
    
64. Jan  1 00:00:04 kernel: pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
    
65. Jan  1 00:00:04 kernel: pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
    
66. Jan  1 00:00:04 kernel: pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
    
67. Jan  1 00:00:04 kernel: pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
    
68. Jan  1 00:00:04 kernel: pci 0000:00:00.0: supports D1
    
69. Jan  1 00:00:04 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
    
70. Jan  1 00:00:04 kernel: pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
    
71. Jan  1 00:00:04 kernel: pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
    
72. Jan  1 00:00:04 kernel: pci 0000:00:01.0: supports D1
    
73. Jan  1 00:00:04 kernel: pci 0000:00:01.0: PME# supported from D0 D1 D3hot
    
74. Jan  1 00:00:04 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    
75. Jan  1 00:00:04 kernel: pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    
76. Jan  1 00:00:04 kernel: pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
    
77. Jan  1 00:00:04 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
    
78. Jan  1 00:00:04 kernel: pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
    
79. Jan  1 00:00:04 kernel: pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
    
80. Jan  1 00:00:04 kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    
81. Jan  1 00:00:04 kernel: pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
    
82. Jan  1 00:00:04 kernel: pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
    
83. Jan  1 00:00:04 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
    
84. Jan  1 00:00:04 kernel: pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
    
85. Jan  1 00:00:04 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
    
86. Jan  1 00:00:04 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
    
87. Jan  1 00:00:04 kernel: pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
    
88. Jan  1 00:00:04 kernel: pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff]
    
89. Jan  1 00:00:04 kernel: pci 0000:00:01.0: PCI bridge to [bus 02-02]
    
90. Jan  1 00:00:04 kernel: pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
    
91. Jan  1 00:00:04 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
    
92. Jan  1 00:00:04 kernel: PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
    
93. Jan  1 00:00:04 kernel: Switching to clocksource MIPS
    
94. Jan  1 00:00:04 kernel: NET: Registered protocol family 2
    
95. Jan  1 00:00:04 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    
96. Jan  1 00:00:04 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    
97. Jan  1 00:00:04 kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    
98. Jan  1 00:00:04 kernel: TCP: Hash tables configured (established 4096 bind 4096)
    
99. Jan  1 00:00:04 kernel: TCP: reno registered
    
100. Jan  1 00:00:04 kernel: UDP hash table entries: 128 (order: 0, 4096 bytes)
     
101. Jan  1 00:00:04 kernel: NET: Registered protocol family 1
     
102. Jan  1 00:00:04 kernel: PCI: CLS 32 bytes, default 32
     
103. Jan  1 00:00:04 kernel: 4 CPUs re-calibrate udelay (lpj = 1167360)
     
104. Jan  1 00:00:04 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
105. Jan  1 00:00:04 kernel: msgmni has been set to 246
     
106. Jan  1 00:00:04 kernel: io scheduler noop registered (default)
     
107. Jan  1 00:00:04 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
     
108. Jan  1 00:00:04 kernel: serial8250: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a 16550A
     
109. Jan  1 00:00:04 kernel: Ralink GPIO driver initialized. Number of GPIO: 64, GPIO mode: 000A05A8
     
110. Jan  1 00:00:04 kernel: loop: module loaded
     
111. Jan  1 00:00:04 kernel: MediaTek NAND driver init, version v2.1
     
112. Jan  1 00:00:04 kernel: MTK NFI: NAND ID [C8 D1, 80 95 40 7F]
     
113. Jan  1 00:00:04 kernel: MTK NFI: NAND chip found in MTK table: F59L1G81MB
     
114. Jan  1 00:00:04 kernel: NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (ESMT NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
     
115. Jan  1 00:00:04 kernel: Scanning device for bad blocks
     
116. Jan  1 00:00:04 kernel: MTK NFI: success load FACT_BBT from block 1023
     
117. Jan  1 00:00:04 kernel: Creating 9 MTD partitions on "MT7621-NAND":
     
118. Jan  1 00:00:04 kernel: 0x000000000000-0x000000080000 : "Bootloader"
     
119. Jan  1 00:00:04 kernel: 0x000000080000-0x000000100000 : "BootEnv"
     
120. Jan  1 00:00:04 kernel: 0x000000100000-0x000000600000 : "Factory"
     
121. Jan  1 00:00:04 kernel: 0x000000600000-0x000000740000 : "Kernel"
     
122. Jan  1 00:00:04 kernel: 0x000000740000-0x000003600000 : "RootFS"
     
123. Jan  1 00:00:04 kernel: 0x000003600000-0x000003700000 : "Config"
     
124. Jan  1 00:00:04 kernel: 0x000003700000-0x000003b00000 : "Storage"
     
125. Jan  1 00:00:04 kernel: 0x000003b00000-0x000007f80000 : "RWFS"
     
126. Jan  1 00:00:04 kernel: 0x000000600000-0x000003600000 : "Firmware_Stub"
     
127. Jan  1 00:00:04 kernel: tun: Universal TUN/TAP device driver, 1.6
     
128. Jan  1 00:00:04 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
     
129. Jan  1 00:00:04 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
     
130. Jan  1 00:00:04 kernel: raeth: PDMA RX ring 512, QDMA TX pool 1024. Max packet size 1536
     
131. Jan  1 00:00:04 kernel: raeth: NAPI & GRO support, weight 64
     
132. Jan  1 00:00:04 kernel: raeth: Byte Queue Limits (BQL) support
     
133. Jan  1 00:00:04 kernel: PPP generic driver version 2.4.2
     
134. Jan  1 00:00:04 kernel: PPP MPPE Compression module registered
     
135. Jan  1 00:00:04 kernel: NET: Registered protocol family 24
     
136. Jan  1 00:00:04 kernel: p p t p driver version 0.8.5
     
137. Jan  1 00:00:04 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
     
138. Jan  1 00:00:04 kernel: xt_time: kernel timezone is -0000
     
139. Jan  1 00:00:04 kernel: Bridge firewalling registered
     
140. Jan  1 00:00:04 kernel: gre: GRE over IPv4 demultiplexor driver
     
141. Jan  1 00:00:04 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
     
142. Jan  1 00:00:04 kernel: TCP: cubic registered
     
143. Jan  1 00:00:04 kernel: NET: Registered protocol family 10
     
144. Jan  1 00:00:04 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
     
145. Jan  1 00:00:04 kernel: IPv6 over IPv4 tunneling driver
     
146. Jan  1 00:00:04 kernel: NET: Registered protocol family 17
     
147. Jan  1 00:00:04 kernel: L2TP core driver, V2.0
     
148. Jan  1 00:00:04 kernel: PPPoL2TP kernel driver, V2.0
     
149. Jan  1 00:00:04 kernel: 8021q: 802.1Q VLAN Support v1.8
     
150. Jan  1 00:00:04 kernel: ASUS NVRAM, v0.08. Available space: 131072. Integrity: OK
     
151. Jan  1 00:00:04 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
     
152. Jan  1 00:00:04 kernel: Freeing unused kernel memory: 248k freed
     
153. Jan  1 00:00:04 kernel: Algorithmics/MIPS FPU Emulator v1.5
     
154. Jan  1 00:00:04 kernel: UBI: attaching mtd7 to ubi0
     
155. Jan  1 00:00:04 kernel: UBI: physical eraseblock size:   131072 bytes (128 KiB)
     
156. Jan  1 00:00:04 kernel: UBI: logical eraseblock size:    126976 bytes
     
157. Jan  1 00:00:04 kernel: UBI: smallest flash I/O unit:    2048
     
158. Jan  1 00:00:04 kernel: UBI: VID header offset:          2048 (aligned 2048)
     
159. Jan  1 00:00:04 kernel: UBI: data offset:                4096
     
160. Jan  1 00:00:04 kernel: UBI error: process_eb: bad image sequence number 532994327 in PEB 24, expected 1745267955
     
161. Jan  1 00:00:04 kernel: register mt_drv
     
162. Jan  1 00:00:04 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
     
163. Jan  1 00:00:04 kernel: == pAd = c0681000, size = 3314496, Status=0 ==
     
164. Jan  1 00:00:04 kernel: pAd->PciHif.CSRBaseAddress =0xc0580000, csr_addr=0xc0580000!
     
165. Jan  1 00:00:04 kernel: RTMPInitPCIeDevice():device_id=0x7615
     
166. Jan  1 00:00:04 kernel: mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
     
167. Jan  1 00:00:04 kernel: mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
     
168. Jan  1 00:00:04 kernel: AP Driver version-5.0.4.0
     
169. Jan  1 00:00:04 kernel: RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0
     
170. Jan  1 00:00:04 kernel: mt7615_init()-->
     
171. Jan  1 00:00:04 kernel: Use 1st iPAiLNA default bin.
     
172. Jan  1 00:00:04 kernel: Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin.
     
173. Jan  1 00:00:04 kernel: <--mt7615_init()
     
174. Jan  1 00:00:04 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
     
175. Jan  1 00:00:04 kernel: register mt7603_drv
     
176. Jan  1 00:00:04 kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
     
177. Jan  1 00:00:04 kernel: === pAd = c0c81000, size = 1111696 ===
     
178. Jan  1 00:00:04 kernel: <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
     
179. Jan  1 00:00:04 kernel: <-- RTMPAllocAdapterBlock, Status=0
     
180. Jan  1 00:00:04 kernel: pAd->CSRBaseAddress =0xc0b80000, csr_addr=0xc0b80000!
     
181. Jan  1 00:00:04 kernel: device_id =0x7603
     
182. Jan  1 00:00:04 kernel: MT7603 AP Driver version 4.1.2.0_20190222
     
183. Jan  1 00:00:04 kernel: mt7603_init()-->
     
184. Jan  1 00:00:04 kernel: mt_bcn_buf_init(224): Not support for HIF_MT yet!
     
185. Jan  1 00:00:04 kernel: <--mt7603_init()
     
186. Jan  1 00:00:04 kernel: load_dev_l1profile()-->
     
187. Jan  1 00:00:04 kernel: match_index_by_chipname() MT7603 found as INDEX0
     
188. Jan  1 00:00:04 kernel: l1set_profile_path() profile remain /etc/Wireless/RT2860/RT2860AP.dat
     
189. Jan  1 00:00:04 kernel: l1set_eeprom_offset() eeprom offset update from 0x40000 to 0x0
     
190. Jan  1 00:00:04 kernel: l1set_eeprom_size() eeprom size update from 0x200 to 0x400
     
191. Jan  1 00:00:04 kernel: l1set_ifname() ifname rename from ra0 to ra
     
192. Jan  1 00:00:04 kernel: l1set_ifname() ifname remain ra
     
193. Jan  1 00:00:04 kernel: l1set_ifname() ifname remain wds
     
194. Jan  1 00:00:04 kernel: l1set_ifname() ifname remain apcli
     
195. Jan  1 00:00:04 kernel: Netfilter messages via NETLINK v0.30.
     
196. Jan  1 00:00:04 kernel: ip_set: protocol 6
     
197. Jan  1 00:00:04 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
     
198. Jan  1 00:00:04 kernel: raeth: HW VLAN RX offload enabled
     
199. Jan  1 00:00:04 kernel: raeth: HW VLAN TX offload enabled
     
200. Jan  1 00:00:04 kernel: raeth: HW Scatter/Gather TX offload enabled
     
201. Jan  1 00:00:04 kernel: raeth: HW TCP segmentation offload (TSO) enabled
     
202. Jan  1 00:00:04 kernel: mtk_esw - hw bridge: W|LLLL
     
203. Jan  1 00:00:04 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
     
204. Jan  1 00:00:04 kernel: device eth2 entered promiscuous mode
     
205. Jan  1 00:00:04 kernel: rai0: ===> main_virtual_if_open
     
206. Jan  1 00:00:04 kernel: load l1profile succeed!
     
207. Jan  1 00:00:04 kernel: driver_own()::Try to Clear FW Own...
     
208. Jan  1 00:00:04 kernel: driver_own()::Success to clear FW Own
     
209. Jan  1 00:00:04 kernel: APWdsInitialize():WdsEntry Number=4
     
210. Jan  1 00:00:04 kernel: RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860/RT2860_5G.dat
     
211. Jan  1 00:00:04 kernel: Open file "/etc/Wireless/RT2860/RT2860_5G.dat" failed!
     
212. Jan  1 00:00:04 kernel: E2pAccessMode=2
     
213. Jan  1 00:00:04 kernel: SSID[0]=JiQiMao_5G, EdcaIdx=0
     
214. Jan  1 00:00:04 kernel: SSID[1]=RM2100_GUEST_5G_A6DB, EdcaIdx=0
     
215. Jan  1 00:00:04 kernel: BSS0 PhyMode=49
     
216. Jan  1 00:00:04 kernel: wmode_band_equal(): Band Equal!
     
217. Jan  1 00:00:04 kernel: BandSteering=0
     
218. Jan  1 00:00:04 kernel: [TxPower] BAND0: 100
     
219. Jan  1 00:00:04 kernel: CalCacheApply = 0
     
220. Jan  1 00:00:04 kernel: FragThreshold[0]=2346
     
221. Jan  1 00:00:04 kernel: I/F(ra0) NoForwardingMBCast=0
     
222. Jan  1 00:00:04 kernel: I/F(ra1) NoForwardingMBCast=1
     
223. Jan  1 00:00:04 kernel: read_etxbf: ETxBfEnCond = 0
     
224. Jan  1 00:00:04 kernel: read_etxbf: BSSID[0]
     
225. Jan  1 00:00:04 kernel: read_etxbf: MBSS[0] ETxBfEnCond = 0
     
226. Jan  1 00:00:04 kernel: read_etxbf: More BSSID[1]
     
227. Jan  1 00:00:04 kernel: read_etxbf: More MBSS[1] ETxBfEnCond = 0
     
228. Jan  1 00:00:04 kernel: ApCliAPSDCapable[0]=0
     
229. Jan  1 00:00:04 kernel: If/wds0 - PeerPhyOpMode=2
     
230. Jan  1 00:00:04 kernel: If/wds1 - PeerPhyOpMode=2
     
231. Jan  1 00:00:04 kernel: If/wds2 - PeerPhyOpMode=2
     
232. Jan  1 00:00:04 kernel: If/wds3 - PeerPhyOpMode=2
     
233. Jan  1 00:00:04 kernel: APWdsInitialize():WdsEntry Number=4
     
234. Jan  1 00:00:04 kernel: WDS-Enable mode=0
     
235. Jan  1 00:00:04 kernel: HT: WDEV[0] Ext Channel = ABOVE
     
236. Jan  1 00:00:04 kernel: RTMPSetProfileParameters: Mcast frame, i=0,  Mode=2!
     
237. Jan  1 00:00:04 kernel: RTMPSetProfileParameters: Mcast frame, i=0,  MCS=0!
     
238. Jan  1 00:00:04 kernel: WtcSetMaxStaNum: BssidNum:2, MaxStaNum:124 (WdsNum:4, ApcliNum:1, MaxNumChipRept:32), MinMcastWcid:125
     
239. Jan  1 00:00:04 kernel: Top Init Done!
     
240. Jan  1 00:00:04 kernel: Use dev_alloc_skb
     
241. Jan  1 00:00:04 kernel: RX[0] DESC a6104000 size = 16384
     
242. Jan  1 00:00:04 kernel: RX[1] DESC a6dca000 size = 8192
     
243. Jan  1 00:00:04 kernel: cut_through_init(): ct sw token number = 4095
     
244. Jan  1 00:00:04 kernel: cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
     
245. Jan  1 00:00:04 kernel: cut_through_token_list_init(): 87d8ae88,87d8ae88
     
246. Jan  1 00:00:04 kernel: cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
     
247. Jan  1 00:00:04 kernel: cut_through_token_list_init(): 87d8ae98,87d8ae98
     
248. Jan  1 00:00:04 kernel: Hif Init Done!
     
249. Jan  1 00:00:04 kernel: ctl->txq = c09a4b6c
     
250. Jan  1 00:00:04 kernel: ctl->rxq = c09a4b78
     
251. Jan  1 00:00:04 kernel: ctl->ackq = c09a4b84
     
252. Jan  1 00:00:04 kernel: ctl->kickq = c09a4b90
     
253. Jan  1 00:00:04 kernel: ctl->tx_doneq = c09a4b9c
     
254. Jan  1 00:00:04 kernel: ctl->rx_doneq = c09a4ba8
     
255. Jan  1 00:00:04 kernel: Parsing patch header
     
256. Jan  1 00:00:04 kernel:         Built date: 20180518100604a
     
257. Jan  1 00:00:04 kernel:         Platform: ALPS
     
258. Jan  1 00:00:04 kernel:         HW/SW version: 0x8a108a10
     
259. Jan  1 00:00:04 kernel:         Patch version: 0x00000010
     
260. Jan  1 00:00:04 kernel:         Target address: 0x80000, length: 11072
     
261. Jan  1 00:00:04 kernel: patch is not ready && get semaphore success
     
262. Jan  1 00:00:04 kernel: EventGenericEventHandler: CMD Success
     
263. Jan  1 00:00:04 kernel: MtCmdPatchFinishReq
     
264. Jan  1 00:00:04 kernel: EventGenericEventHandler: CMD Success
     
265. Jan  1 00:00:04 kernel: release patch semaphore
     
266. Jan  1 00:00:04 kernel: Parsing CPU 0 fw tailer
     
267. Jan  1 00:00:04 kernel:         Chip ID: 0x04
     
268. Jan  1 00:00:04 kernel:         Eco version: 0x00
     
269. Jan  1 00:00:04 kernel:         Region number: 0x00
     
270. Jan  1 00:00:04 kernel:         Format version: 0x00
     
271. Jan  1 00:00:04 kernel:         Ram version: _reserved_
     
272. Jan  1 00:00:04 kernel:         Built date: 20190307015603
     
273. Jan  1 00:00:04 kernel:         Common crc: 0x0
     
274. Jan  1 00:00:04 kernel: Parsing tailer region 0
     
275. Jan  1 00:00:04 kernel:         Feature set: 0x01
     
276. Jan  1 00:00:04 kernel:         Target address: 0x84000, Download size: 409600
     
277. Jan  1 00:00:04 kernel: Parsing tailer region 1
     
278. Jan  1 00:00:04 kernel:         Feature set: 0x01
     
279. Jan  1 00:00:04 kernel:         Target address: 0x209c400, Download size: 43328
     
280. Jan  1 00:00:04 kernel: EventGenericEventHandler: CMD Success
     
281. Jan  1 00:00:05 kernel: EventGenericEventHandler: CMD Success
     
282. Jan  1 00:00:05 kernel: MtCmdFwStartReq: override = 0x1, address = 0x84000
     
283. Jan  1 00:00:05 kernel: EventGenericEventHandler: CMD Success
     
284. Jan  1 00:00:05 kernel: Parsing CPU 1 fw tailer
     
285. Jan  1 00:00:05 kernel:         Chip ID: 0x04
     
286. Jan  1 00:00:05 kernel:         Eco version: 0x00
     
287. Jan  1 00:00:05 kernel:         Region number: 0x00
     
288. Jan  1 00:00:05 kernel:         Format version: 0x00
     
289. Jan  1 00:00:05 kernel:         Ram version: _reserved_
     
290. Jan  1 00:00:05 kernel:         Built date: 20190415154149
     
291. Jan  1 00:00:05 kernel:         Common crc: 0x0
     
292. Jan  1 00:00:05 kernel: Parsing tailer region 0
     
293. Jan  1 00:00:05 kernel:         Feature set: 0x01
     
294. Jan  1 00:00:05 kernel:         Target address: 0x90000000, Download size: 122608
     
295. Jan  1 00:00:05 kernel: EventGenericEventHandler: CMD Success
     
296. Jan  1 00:00:05 kernel: MtCmdFwStartReq: override = 0x4, address = 0x0
     
297. Jan  1 00:00:05 kernel: EventGenericEventHandler: CMD Success
     
298. Jan  1 00:00:05 kernel: MCU Init Done!
     
299. Jan  1 00:00:05 kernel: efuse_probe: efuse = 10000212
     
300. Jan  1 00:00:05 kernel: RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
     
301. Jan  1 00:00:05 kernel: RtmpEepromGetDefault::e2p_dafault=1
     
302. Jan  1 00:00:05 kernel: RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
     
303. Jan  1 00:00:05 kernel: NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x8000]
     
304. Jan  1 00:00:05 kernel: ^[[34mNICReadEEPROMParameters: EEPROM 0x52 b300^[[m
     
305. Jan  1 00:00:12 kernel: Country Region from e2p = 101
     
306. Jan  1 00:00:12 kernel: mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
     
307. Jan  1 00:00:12 kernel: RcRadioInit(): DbdcMode=0, ConcurrentBand=1
     
308. Jan  1 00:00:12 kernel: RcRadioInit(): pRadioCtrl=86dc8a9c,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
     
309. Jan  1 00:00:12 kernel: MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
     
310. Jan  1 00:00:12 kernel: MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
     
311. Jan  1 00:00:12 kernel: EEPROM Init Done!
     
312. Jan  1 00:00:12 kernel: mt_mac_init()-->
     
313. Jan  1 00:00:12 kernel: mt7615_init_mac_cr()-->
     
314. Jan  1 00:00:12 kernel: mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
     
315. Jan  1 00:00:12 kernel: <--mt_mac_init()
     
316. Jan  1 00:00:12 kernel: CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
     
317. Jan  1 00:00:12 kernel: MAC Init Done!
     
318. Jan  1 00:00:12 kernel: MT7615BBPInit():BBP Initialization.....
     
319. Jan  1 00:00:12 kernel:         Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
     
320. Jan  1 00:00:12 kernel:         Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
     
321. Jan  1 00:00:12 kernel: MT7615BBPInit() todo
     
322. Jan  1 00:00:12 kernel: PHY Init Done!
     
323. Jan  1 00:00:12 kernel: MtCmdSetMacTxRx:(ret = 0)
     
324. Jan  1 00:00:12 kernel: WifiFwdSet::disabled=0
     
325. Jan  1 00:00:12 kernel: Main bssid = 00:00:00:00:00:00
     
326. Jan  1 00:00:12 kernel: MtCmdSetMacTxRx:(ret = 0)
     
327. Jan  1 00:00:12 kernel: <==== mt_wifi_init, Status=0
     
328. Jan  1 00:00:12 kernel: TxBfModuleEnCtrl:It's not DBDC mode
     
329. Jan  1 00:00:12 kernel: MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
     
330. Jan  1 00:00:12 kernel: The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
     
331. Jan  1 00:00:12 kernel: hc_radio_res_request(): wdev=2, hobj is not ready!
     
332. Jan  1 00:00:12 kernel: The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
     
333. Jan  1 00:00:12 kernel: hc_radio_res_request(): wdev=3, hobj is not ready!
     
334. Jan  1 00:00:12 kernel: The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
     
335. Jan  1 00:00:12 kernel: hc_radio_res_request(): wdev=4, hobj is not ready!
     
336. Jan  1 00:00:12 kernel: The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
     
337. Jan  1 00:00:12 kernel: hc_radio_res_request(): wdev=5, hobj is not ready!
     
338. Jan  1 00:00:12 kernel: Total allocated 4 WDS interfaces!
     
339. Jan  1 00:00:12 kernel: WtcSetMaxStaNum: BssidNum:2, MaxStaNum:124 (WdsNum:4, ApcliNum:1, MaxNumChipRept:32), MinMcastWcid:125
     
340. Jan  1 00:00:12 kernel: RedInit: set CR4/N9 RED Enable to 1.
     
341. Jan  1 00:00:12 kernel: RedInit: RED Initiailize Done.
     
342. Jan  1 00:00:12 kernel: cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
     
343. Jan  1 00:00:12 kernel: RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
     
344. Jan  1 00:00:12 kernel: wifi_sys_open(), wdev idx = 0
     
345. Jan  1 00:00:12 kernel: wdev_attr_update(): wdevId0 = 88:c3:97:4d:a6:dd
     
346. Jan  1 00:00:12 kernel: ^[[1;33m [RadarStateCheck] RD_NORMAL_MODE ^[[m
     
347. Jan  1 00:00:13 kernel: Caller: 0x85ccf438
     
348. Jan  1 00:00:13 kernel: phy_mode=49, ch=36, wdev_type=1
     
349. Jan  1 00:00:14 kernel: ht_cap->HtCapInfo: ldpc=0,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
     
350. Jan  1 00:00:14 kernel: ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
     
351. Jan  1 00:00:14 kernel: AP inf up for ra_0(func_idx) OmacIdx=0
     
352. Jan  1 00:00:14 kernel: AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
     
353. Jan  1 00:00:14 kernel: ApAutoChannelAtBootUp----------------->
     
354. Jan  1 00:00:14 kernel: ApAutoChannelAtBootUp: AutoChannelBootup = 0
     
355. Jan  1 00:00:14 kernel: ApAutoChannelAtBootUp<-----------------
     
356. Jan  1 00:00:14 kernel: ^[[41m ap_run_at_boot() : ACS is disable !!^[[m
     
357. Jan  1 00:00:14 kernel: [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
     
358. Jan  1 00:00:14 kernel: wifi_sys_linkup(), wdev idx = 0
     
359. Jan  1 00:00:14 kernel: wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
     
360. Jan  1 00:00:14 kernel:  LinkToOmacIdx = 0, LinkToWdevType = 1
     
361. Jan  1 00:00:14 kernel: bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8192
     
362. Jan  1 00:00:14 kernel: UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
     
363. Jan  1 00:00:14 kernel: APStartUpForMbss: BssIndex = 0 channel = 36
     
364. Jan  1 00:00:14 kernel: MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
     
365. Jan  1 00:00:14 kernel: apidx 0 for WscUUIDInit
     
366. Jan  1 00:00:14 kernel: Generate UUID for apidx(0)
     
367. Jan  1 00:00:14 kernel: device rai0 entered promiscuous mode
     
368. Jan  1 00:00:14 kernel: load_dev_l1profile()-->
     
369. Jan  1 00:00:14 kernel: l1set_profile_path() profile remain /etc/Wireless/RT2860/RT2860AP.dat
     
370. Jan  1 00:00:14 kernel: l1set_eeprom_offset() eeprom offset remain 0x0
     
371. Jan  1 00:00:14 kernel: l1set_eeprom_size() eeprom size remain 0x400
     
372. Jan  1 00:00:14 kernel: l1set_ifname() ifname rename from ra0 to ra
     
373. Jan  1 00:00:14 kernel: l1set_ifname() ifname remain ra
     
374. Jan  1 00:00:14 kernel: l1set_ifname() ifname remain wds
     
375. Jan  1 00:00:14 kernel: l1set_ifname() ifname remain apcli
     
376. Jan  1 00:00:14 kernel: TX_BCN DESC a6eab000 size = 320
     
377. Jan  1 00:00:14 kernel: RX[0] DESC a6ead000 size = 2048
     
378. Jan  1 00:00:14 kernel: RX[1] DESC a6eae000 size = 2048
     
379. Jan  1 00:00:14 kernel: E2pAccessMode=2
     
380. Jan  1 00:00:14 kernel: cfg_mode=7
     
381. Jan  1 00:00:14 kernel: wmode_band_equal(): Band Equal!
     
382. Jan  1 00:00:14 kernel: Key1Str is Invalid key length(0) or Type(0)
     
383. Jan  1 00:00:14 kernel: Key2Str is Invalid key length(0) or Type(0)
     
384. Jan  1 00:00:14 kernel: Key3Str is Invalid key length(0) or Type(0)
     
385. Jan  1 00:00:14 kernel: Key4Str is Invalid key length(0) or Type(0)
     
386. Jan  1 00:00:14 kernel: FW Version:CL173766_R
     
387. Jan  1 00:00:14 kernel: FW Build Date:20171110105932
     
388. Jan  1 00:00:14 kernel: CmdAddressLenReq:(ret = 0)
     
389. Jan  1 00:00:14 kernel: CmdFwStartReq: override = 1, address = 1048576
     
390. Jan  1 00:00:14 kernel: CmdStartDLRsp: WiFI FW Download Success
     
391. Jan  1 00:00:14 kernel: AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
     
392. Jan  1 00:00:14 kernel: efuse_probe: efuse = 10000002
     
393. Jan  1 00:00:14 kernel: RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
     
394. Jan  1 00:00:14 kernel: RtmpEepromGetDefault::e2p_dafault=1
     
395. Jan  1 00:00:14 kernel: RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
     
396. Jan  1 00:00:14 kernel: NVM is FLASH mode, flash_offset = 0x40000
     
397. Jan  1 00:00:14 kernel: 1. Phy Mode = 12
     
398. Jan  1 00:00:14 kernel: @@@  NICReadEEPROMParameters : pAd->FWLoad=0
     
399. Jan  1 00:00:15 kernel: Country Region from e2p = ffff
     
400. Jan  1 00:00:15 kernel: tssi_1_target_pwr_g_band = 12
     
401. Jan  1 00:00:15 kernel: 2. Phy Mode = 12
     
402. Jan  1 00:00:15 kernel: 3. Phy Mode = 12
     
403. Jan  1 00:00:15 kernel: NICInitPwrPinCfg(14): Not support for HIF_MT yet!
     
404. Jan  1 00:00:15 kernel: NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet!
     
405. Jan  1 00:00:15 kernel: mt_mac_init()-->
     
406. Jan  1 00:00:15 kernel: mt7603_init_mac_cr()-->
     
407. Jan  1 00:00:15 kernel: AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024!
     
408. Jan  1 00:00:15 kernel: <--mt_mac_init()
     
409. Jan  1 00:00:15 kernel:         WTBL Segment 1 info:
     
410. Jan  1 00:00:15 kernel:                 MemBaseAddr/FID:0x28000/0
     
411. Jan  1 00:00:15 kernel:                 EntrySize/Cnt:32/128
     
412. Jan  1 00:00:15 kernel:         WTBL Segment 2 info:
     
413. Jan  1 00:00:15 kernel:                 MemBaseAddr/FID:0x40000/0
     
414. Jan  1 00:00:15 kernel:                 EntrySize/Cnt:64/128
     
415. Jan  1 00:00:15 kernel:         WTBL Segment 3 info:
     
416. Jan  1 00:00:15 kernel:                 MemBaseAddr/FID:0x42000/64
     
417. Jan  1 00:00:15 kernel:                 EntrySize/Cnt:64/128
     
418. Jan  1 00:00:15 kernel:         WTBL Segment 4 info:
     
419. Jan  1 00:00:15 kernel:                 MemBaseAddr/FID:0x44000/128
     
420. Jan  1 00:00:15 kernel:                 EntrySize/Cnt:32/128
     
421. Jan  1 00:00:15 kernel: AntCfgInit(2689): Not support for HIF_MT yet!
     
422. Jan  1 00:00:15 kernel: RTMPSetPhyMode(): channel out of range, use first ch=0
     
423. Jan  1 00:00:15 kernel: MCS Set = ff ff 00 00 01
     
424. Jan  1 00:00:23 kernel: =====================================================
     
425. Jan  1 00:00:23 kernel: Channel 1 : Dirty = 488, False CCA = 0, Busy Time = 25060, Skip Channel = FALSE
     
426. Jan  1 00:00:23 kernel: Channel 2 : Dirty = 428, False CCA = 0, Busy Time = 45540, Skip Channel = FALSE
     
427. Jan  1 00:00:23 kernel: Channel 3 : Dirty = 448, False CCA = 0, Busy Time = 24890, Skip Channel = FALSE
     
428. Jan  1 00:00:23 kernel: Channel 4 : Dirty = 616, False CCA = 0, Busy Time = 13885, Skip Channel = FALSE
     
429. Jan  1 00:00:23 kernel: Channel 5 : Dirty = 608, False CCA = 0, Busy Time = 12183, Skip Channel = FALSE
     
430. Jan  1 00:00:23 kernel: Channel 6 : Dirty = 946, False CCA = 0, Busy Time = 14517, Skip Channel = FALSE
     
431. Jan  1 00:00:23 kernel: Channel 7 : Dirty = 692, False CCA = 0, Busy Time = 10775, Skip Channel = FALSE
     
432. Jan  1 00:00:23 kernel: Channel 8 : Dirty = 870, False CCA = 0, Busy Time = 16663, Skip Channel = FALSE
     
433. Jan  1 00:00:23 kernel: Channel 9 : Dirty = 824, False CCA = 0, Busy Time = 16607, Skip Channel = FALSE
     
434. Jan  1 00:00:23 kernel: Channel 10 : Dirty = 850, False CCA = 0, Busy Time = 14502, Skip Channel = FALSE
     
435. Jan  1 00:00:23 kernel: Channel 11 : Dirty = 752, False CCA = 0, Busy Time = 8547, Skip Channel = FALSE
     
436. Jan  1 00:00:23 kernel: Channel 12 : Dirty = 570, False CCA = 0, Busy Time = 7024, Skip Channel = FALSE
     
437. Jan  1 00:00:23 kernel: Channel 13 : Dirty = 564, False CCA = 0, Busy Time = 6339, Skip Channel = FALSE
     
438. Jan  1 00:00:23 kernel: =====================================================
     
439. Jan  1 00:00:23 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1
     
440. Jan  1 00:00:23 kernel: Min Dirty = 1096
     
441. Jan  1 00:00:23 kernel: ExChannel = 5 , 0
     
442. Jan  1 00:00:23 kernel: BW        = 40
     
443. Jan  1 00:00:23 kernel: AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet!
     
444. Jan  1 00:00:23 kernel: RTMPSetPiggyBack(943): Not support for HIF_MT yet!
     
445. Jan  1 00:00:23 kernel: AsicSetTxPreamble(4312): Not support for HIF_MT yet!
     
446. Jan  1 00:00:23 kernel: AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
     
447. Jan  1 00:00:23 kernel: Main bssid = 88:c3:97:4d:a6:dc
     
448. Jan  1 00:00:23 kernel: <==== rt28xx_init, Status=0
     
449. Jan  1 00:00:23 kernel: @@@ ed_monitor_exit : ===>
     
450. Jan  1 00:00:23 kernel: @@@ ed_monitor_exit : <===
     
451. Jan  1 00:00:23 kernel: mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0x8564267c, EDCCA_Status=0
     
452. Jan  1 00:00:23 kernel: WiFi Startup Cost (ra0): 9.524s
     
453. Jan  1 00:00:23 kernel: device ra0 entered promiscuous mode
     
454. Jan  1 00:00:24 kernel: br0: port 3(ra0) entered forwarding state
     
455. Jan  1 00:00:24 kernel: br0: port 2(rai0) entered forwarding state
     
456. Jan  1 00:00:24 kernel: br0: port 1(eth2) entered forwarding state
     
457. Jan  1 00:00:24 kernel: mtk_esw - software IGMP/MLD snooping: 1
     
458. Jan  1 00:00:24 dnsmasq[417]: started, version 2.80 cachesize 1024
     
459. Jan  1 00:00:24 dnsmasq[417]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify dumpfile
     
460. Jan  1 00:00:24 dnsmasq-dhcp[417]: DHCP, IP range 192.168.2.100 -- 192.168.2.244, lease time 1d
     
461. Jan  1 00:00:24 dnsmasq-dhcp[417]: DHCP, sockets bound exclusively to interface br0
     
462. Jan  1 00:00:24 dnsmasq[417]: read /etc/hosts - 3 addresses
     
463. Jan  1 00:00:24 dnsmasq[417]: read /etc/storage/dnsmasq/hosts - 0 addresses
     
464. Jan  1 00:00:24 dnsmasq-dhcp[417]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
     
465. Jan  1 00:00:25 kernel: eth3: ===> VirtualIF_open
     
466. Jan  1 00:00:25 RM2100: Hardware NAT/Routing: Disabled
     
467. Jan  1 00:00:25 DHCP WAN Client: starting on eth3 ...
     
468. Jan  1 00:00:25 httpd[451]: Server listening port 80 (HTTP).
     
469. Jan  1 00:00:26 sshd[456]: Server listening on :: port 22.
     
470. Jan  1 00:00:26 sshd[456]: Server listening on 0.0.0.0 port 22.
     
471. Jan  1 00:00:26 miniupnpd[460]: version 2.0 starting UPnP-IGD ext if eth3 BOOTID=1420041626
     
472. Jan  1 00:00:26 miniupnpd[460]: HTTP listening on port 59938
     
473. Jan  1 00:00:26 miniupnpd[460]: no HTTP IPv6 address, disabling IPv6
     
474. Jan  1 00:00:26 skipd[465]: Load count=0 maxPos=4
     
475. Jan  1 00:00:26 kernel: Load Ralink WDG Timer Module
     
476. Jan  1 00:00:26 自动启动: 正在检查路由是否已连接互联网！
     
477. Jan  1 00:00:26 kernel: br0: port 3(ra0) entered forwarding state
     
478. Jan  1 00:00:26 kernel: br0: port 2(rai0) entered forwarding state
     
479. Jan  1 00:00:26 kernel: br0: port 1(eth2) entered forwarding state
     

复制代码

zhenlou

坏块有教程查询的

qq122137748

闪灯的时候  192.168.2.1进入

lz_hui

qq122137748 发表于 2020-6-3 22:15
闪灯的时候  192.168.2.1进入

进不去，我按教程刷的，breed需要单独刷吗？

老默

看了下日志，没坏块，放心用吧！

我的海洋

应该是需要单独刷breed  我也没进去

老默

breed要刷入才能进，断电按复位键上电5秒后松开，192.168.1.1进

lz_hui

xingyuanbao 发表于 2020-6-3 22:36
breed要刷入才能进，断电按复位键上电5秒后松开，192.168.1.1进

老板，刷breed的教程有么？

老默

lz_hui 发表于 2020-6-3 22:37
老板，刷breed的教程有么？

https://www.right.com.cn/forum/thread-4023907-1-1.html 就这个好好理解

lz_hui

xingyuanbao 发表于 2020-6-3 22:27
看了下日志，没坏块，放心用吧！

谢谢了，字数补丁

lz_hui

xingyuanbao 发表于 2020-6-3 22:40
https://www.right.com.cn/forum/thread-4023907-1-1.html 就这个好好理解

r3g.bin kernel1这个命令是什么意思？另外一个教程里面的

老默

lz_hui 发表于 2020-6-3 22:48
r3g.bin kernel1这个命令是什么意思？另外一个教程里面的

你看的哪个教程啊？我发给你的教程里那一长串命令是从电脑下载breed文件再设置环境变量，最后mtd写入到bootload分区！

lz_hui

xingyuanbao 发表于 2020-6-4 00:07
你看的哪个教程啊？我发给你的教程里那一长串命令是从电脑下载breed文件再设置环境变量，最后mtd写入到bo ...

https://www.right.com.cn/forum/thread-4016985-1-1.html
这个教程，下面有一条命令
wget http://192.168.31.177:8081/r3g.bin&&nvram set uart_en=1&&nvram set bootdelay=5&&nvram set flag_try_sys1_failed=1&&nvram commit
mtd -r write r3g.bin kernel1
请问把r3g.bin写入kernel1有什么意义？这和bootloader有什么关系？谢谢

老默

lz_hui 发表于 2020-6-4 08:40
https://www.right.com.cn/forum/thread-4016985-1-1.html
这个教程，下面有一条命令
wget http://192. ...

这个很好理解呀！比如你的电脑C盘命名“系统”，装软件到C盘和到“系统”一样的道理！第一分区就是bootload分区！

lz_hui

xingyuanbao 发表于 2020-6-4 09:14
这个很好理解呀！比如你的电脑C盘命名“系统”，装软件到C盘和到“系统”一样的道理！第一分区就是bootlo ...

我就想知道这个r3g.bin写入kernel1和breed有什么关系