n1跑不起来U盘

wydwangchen

本人小白一个，照教程n1盒子刷了yyf电视固件，现在想 刷个linux玩玩，U盘插上去上电还是进安卓，哪位大神帮忙指导下迷津。

cynizy

换个口，或者换个优盘

micyao

N1通病，无法识别u盘。方法按楼上。

stephonfan

换U盘。我给你推荐一款，闪迪2.0接口的酷刃CZ50

772787180

只要是闪迪就可以用

xchx

用读卡器插TF卡，比u盘稳100倍，还能用集线器

BarbieBarbara

装个软件，reboot

dragonxpl

昨天遇到了跟你一模一样的问题，几个优盘换来换去，重启都不能识别。后来在balena etcher制作u盘之前先恢复u盘到最初始状态（删除上次制作的所有分区），就能识别了。建议直接用diskpart命令。英文好可以参考这个网页：https://github.com/balena-io/etc ... ering-broken-drives
Windows

In Windows, we'll use diskpart, a command line utility tool that comes pre-installed in all modern Windows versions.

• Open cmd.exe from either the list of all installed applications, or from the "Run..." dialog usually accessible by pressing Ctrl+X.
• Type diskpart.exe and press "Enter". You'll be asked to provide administrator permissions, and a new prompt window will appear. The following commands should be run in the new window.
• Run list disk to list the available drives. Take note of the number id that identifies the drive you want to clean.
• Run select disk N, where N corresponds to the id from the previous step.
• Run clean. This command will completely clean your drive by erasing any existent filesystem.