恩山无线论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 6290|回复: 9
打印 上一主题 下一主题

腾达AC15 华硕固件

[复制链接]
跳转到指定楼层
1#
发表于 2020-12-5 09:44 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 afeng11 于 2021-1-4 22:34 编辑

基于官方梅林代码编译,380.70版本,支持spi和nand,信号很好,也很稳定
miniweb刷入后清空nvram即可
链接:https://pan.baidu.com/s/1KgtG6F0n5Nsbzwcug7bPBg
提取码:
游客,如果您要查看本帖隐藏内容请回复








13 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
14 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
15 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
01 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
02 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
03 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
04 ---++++++++++++++++++++++++X++++++++++++++++++++++++------------
05 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-------
06 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
07 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
08 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++----
09 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
10 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
11 ------------++++++++++++++++++++++++++X++++++++++++++++++++++++-
12 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
13 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
14 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
15 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----
01 ----++++++++++++++++++++++++++++X++++++++++++++++++++++++++++---
02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++--
03 ---+++++++++++++++++++++++++++X+++++++++++++++++++++++++++------
04 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
05 ---+++++++++++++++++++++++++++X+++++++++++++++++++++++++++------
06 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
07 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
08 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
10 ------+++++++++++++++++++++++++++X++++++++++++++++++++++++++----
11 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
12 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
13 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
14 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
15 ---------+++++++++++++++++++++++++++X++++++++++++++++++++++++++-


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++X++++++++++++++++++++++--------------++++-
01 --+++++++++++++++++++++++X++++++++++++++++++++++--------------+-
02 ++++++++++++++++++++++++X++++++++++++++++++++++++------------++-
03 +++++++++++++++++++++++X++++++++++++++++++++++--------------+++-
04 ++++++++++++++++++++X++++++++++++++++++++--------------++++++++-
05 ++++++++++++++++++++++X++++++++++++++++++++++--------------++++-
06 ++++++++++++++++++++++X+++++++++++++++++++++------------+-+++++-
07 +++++++++++++++++++++++X+++++++++++++++++++++++-------------+++-
08 -++++++++++++++++++++++X++++++++++++++++++++++---------------++-
09 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
10 -++++++++++++++++++++++X+++++++++++++++++++++----------------++-
11 ----++++++++++++++++++++++X++++++++++++++++++++++---------------
12 -++++++++++++++++++++++X+++++++++++++++++++++---------------+++-
13 ----++++++++++++++++++++++X+++++++++++++++++++++----------------
14 --++++++++++++++++++++++X+++++++++++++++++++++----------------+-
15 ---+++++++++++++++++++++++X++++++++++++++++++++++---------------


WRDMW0 00000022
WRDMW0 00000024


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++S++++++++++X++++++++++++++++++++++++++++++++

Decompressing...done
Found a ST compatible (Winbond/NexFlash) serial flash with 256 64KB blocks; total size 16MB


CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Sat Aug 15 04:37:51 EDT 2015 (root@AirHost)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Can't find nandflash! ccrev = 42, chipst= 0
DDR Clock: 666 MHz
Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 800MHz
Tot mem: 131072 KBytes

CFE mem:    0x00F00000 - 0x017A81FC (9077244)
Data:       0x00F5F5B0 - 0x00F60C58 (5800)
BSS:        0x00F60C68 - 0x00FA61FC (284052)
Heap:       0x00FA61FC - 0x017A61FC (8388608)
Stack:      0x017A61FC - 0x017A81FC (8192)
Text:       0x00F00000 - 0x00F53798 (341912)
Boot:       0x017A9000 - 0x017E9000
Reloc:      I:00000000 - D:00000000

Mac:c8-3a-35-54-d3-90
Device eth0:  hwaddr C8-3A-35-54-D3-90, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .... 4018464 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: squash filesystem found at block 29
sflash size is too small to afford two images.
Creating 4 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000ff0000 : "linux"
0x0000001db264-0x000000ff0000 : "rootfs"
0x000000ff0000-0x000001000000 : "nvram"
nflash: found no supported devices
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
p p t p driver version 0.8.5
Mirror/redirect action on
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1963 buckets, 7852 max)
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Registering the dns_resolver key type
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
brcmnand: found no supported devices
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
devtmpfs: mounted
Freeing init memory: 212K
## mknod /dev/null: File exists
## mknod /dev/console: File exists
1: set_action 0


Hit ENTER for console...

firmware version: 3.0.0.4.380.70_0
[1 preinit:init_nvram +6] init_nvram for model(41)
num_of_mssid_support(0x0088): [mssid] support [3] mssid

FA off.
ctf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0xce4
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth0 ACTION=add
hotplug net INTERFACE=eth0 ACTION=add
set_wltxpower_vtx(0x0a55): unit: 0, txpower: 100
set_wltxpower_vtx(0x0a56): unit: 1, txpower: 100
wl_module_init: passivemode set to 0x0
wl_module_init: igs set to 0x0
wl_module_init: txworkq set to 0x0
eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth1 ACTION=add
hotplug net INTERFACE=eth1 ACTION=add
eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth2 ACTION=add
hotplug net INTERFACE=eth2 ACTION=add
1: check_action 0
start_logger:
/ # _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
hotplug net INTERFACE=vlan1 ACTION=add
hotplug net INTERFACE=vlan1 ACTION=add
hotplug net INTERFACE=vlan2 ACTION=add
hotplug net INTERFACE=vlan2 ACTION=add
update_lan_state(lan_, 0, 0)
generate_wl_para(0x0acf): unit 0 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 3
generate_wl_para(0x0deb): obss_coex: 1
wlconf_pre(0x0f1a): set vhtmode 1
generate_wl_para(0x0acf): unit 1 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 7
generate_wl_para(0x0deb): obss_coex: 0
wlconf_pre(0x0f1a): set vhtmode 1
start_lan: setting up the bridge br0
hotplug net INTERFACE=br0 ACTION=add
hotplug net INTERFACE=br0 ACTION=add
vlan1: cmd=14: Operation not supported
_ifconfig: name=vlan1 flags=1243 IFUP addr=(null) netmask=(null)
start_lan: setting MAC of br0 bridge to C8:3A:35:543:90
_ifconfig: name=eth1 flags=1243 IFUP addr=(null) netmask=(null)
generate_wl_para(0x0acf): unit 0 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 3
generate_wl_para(0x0deb): obss_coex: 1
generate_wl_para(0x0acf): unit 0 subunit 1
generate_wl_para(0x0acf): unit 0 subunit 2
generate_wl_para(0x0acf): unit 0 subunit 3

_ifconfig: name=eth2 flags=1243 IFUP addr=(null) netmask=(null)
generate_wl_para(0x0acf): unit 1 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 7
generate_wl_para(0x0deb): obss_coex: 0
generate_wl_para(0x0acf): unit 1 subunit 1
generate_wl_para(0x0acf): unit 1 subunit 2
generate_wl_para(0x0acf): unit 1 subunit 3

_ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0
_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0
route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
update_lan_state(lan_, 2, 0)
nat_rule: stop_nat_rules 1.
stop_nat_rules: apply the redirect_rules!
start_lan 1956
# wanduck: Got LAN(-1) information:

# Enable direct rule
wanduck(1): SIM or modem is pulled off.
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1004 (4)
acsd: Adjusted channel spec: 0x1004 (4)
acsd: selected DFS-exit channel spec: 0x1004 (4)
acsd: selected channel spec: 0x1004 (4)
acsd: Adjusted channel spec: 0x1004 (4)
acsd: selected channel spec: 0x1004 (4)
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected DFS-exit channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
[1 preinit:start_dnsmasq +14] begin
[1 preinit:stop_dnsmasq +14] begin
[1 preinit:stop_dnsmasq +14] end
[1 preinit:start_dnsmasq +15] end
start_lan_port(0) 1
TZ watchdog
decomp: fname=/var/lib/misc/rstats-speed.gz
decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0
load: speed_count = 0
load: read source= save_path=
load_history: fname=/var/lib/misc/rstats-history.gz
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
load_history: load failed
vlan1: cmd=14: Operation not supported
start_wan: start_wan_if(0)!
[1 preinit:start_wan_if +15] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
update_wan_state(wan0_, 1, 0)
start_wan_if(0x077f): ifup:eth0
_ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)
start_wan_if(0x0795): start auth:0
start_auth:: done
start_wan_if(0x079e): start udhcpc:eth0, 0
start_wan_if(): End.
start_usb
no tune_bdflush
udhcpc_wan:: deconfig
_ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null)
wan_down(eth0)
wan_down(eth0): .
stop_auth:: done
route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0
update_wan_state(wan0_, 3, 0)
update_wan_state(wan0_, 4, 3)
udhcpc:: deconfig done
csw_retry 100
tfat: disagrees about version of symbol module_layout
tntfs: disagrees about version of symbol module_layout
thfsplus: disagrees about version of symbol module_layout
xhci_hcd 0000:00:0c.0: Failed to enable MSI-X
xhci_hcd 0000:00:0c.0: failed to allocate MSI entry
usb usb1: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
586: check_action 0
checking for user scripts: '.usbhotplug'
usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
598: check_action 0
checking for user scripts: '.usbhotplug'
usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
610: check_action 0
checking for user scripts: '.usbhotplug'
[1 preinit:init_main +18] recv signal 14 from pid [1:/sbin/preinit] (from user)
udhcpc_wan:: leasefail
CN<rc_service> [i:httpd] 427:notify_rc start_autodet[1 preinit:init_main +45] recv signal 10 from pid [427:httpd] (from user)
cmd[0]=start_autodet
[1 preinit:handle_notifications +45] running: 2 autodet
handle_notifications() end
[1 preinit:init_main +46] recv signal 14 from pid [1:/sbin/preinit] (from user)
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
[1 preinit:init_main +353] recv signal 14 from pid [0] (from kernel)
<rc_service> [i:httpd] 427:notify_rc start_autodet[1 preinit:init_main +359] recv signal 10 from pid [427:httpd] (from user)
cmd[0]=start_autodet
[1 preinit:handle_notifications +359] running: 2 autodet
handle_notifications() end
[1 preinit:init_main +360] recv signal 14 from pid [1:/sbin/preinit] (from user)
udhcpc_wan:: leasefail
update_variables: [apply] [saveNvram] [0]
value sw_mode=1
value wl1_ssid=TENDA_5G
validate_instance(0x0806): nvram set wl0_wpa_psk = xu1234678_xz
validate_instance(0x0806): nvram set wl1_wpa_psk = xu1234678_xz
validate_instance(0x0806): nvram set wl0_crypto = aes
validate_instance(0x0806): nvram set wl1_crypto = aes
validate_instance(0x0806): nvram set wl0_auth_mode_x = psk2
validate_instance(0x0806): nvram set wl1_auth_mode_x = psk2
value time_zone=CST-8
set time_zone=CST-8
value wan_unit=0
value http_username=admin
value http_passwd=xu1234678
set http_passwd=xu1234678
value x_Setting=1
set x_Setting=1
value w_Setting=1
set w_Setting=1
<rc_service> [i:httpd] 427:notify_rc chpass[1 preinit:init_main +378] recv signal 10 from pid [427:httpd] (from user)
cmd[0]=chpass
[1 preinit:handle_notifications +378] running: 0 chpass
handle_notifications() end
<rc_service> [i:httpd] 427:notify_rc restart_ftpsambarestart_ftpsamba 427: waiting after 9/10.
[1 preinit:init_main +379] recv signal 10 from pid [427:httpd] (from user)
cmd[0]=restart_ftpsamba
[1 preinit:handle_notifications +379] running: 3 ftpsamba
WARNING: rc notified of unrecognized event `ftpsamba'.
handle_notifications() end
update_variables: [apply] [restart_wireless;restart_time] [6]
value force_change=1
set force_change=1
value x_Setting=1
<rc_service> [i:httpd] 427:notify_rc restart_wireless;restart_time[1 preinit:init_main +382] recv signal 10 from pid [427:httpd] (from user)
cmd[0]=restart_wireless
[1 preinit:handle_notifications +382] running: 3 wireless
killall_tk: waiting name=networkmap n=9
killall_tk: waiting name=networkmap n=8
killall_tk: waiting name=networkmap n=7
killall_tk: waiting name=networkmap n=6
killall_tk: waiting name=networkmap n=5
killall_tk: waiting name=networkmap n=4
killall_tk: waiting name=networkmap n=3
killall_tk: waiting name=networkmap n=2
killall_tk: waiting name=networkmap n=1
killall_tk: waiting name=networkmap n=0
killall_tk: SIGKILL name=networkmap n=9
killall_tk: waiting name=wps_monitor n=9
killall_tk: waiting name=wps_monitor n=8
killall_tk: waiting name=wps_monitor n=7
killall_tk: waiting name=wps_monitor n=6
killall_tk: waiting name=wps_monitor n=5
killall_tk: waiting name=wps_monitor n=4
killall_tk: waiting name=nas n=9
killall_tk: waiting name=eapd n=9

<****>freeze the duck, 13s left!
vlan1: cmd=14: Operation not supported
_ifconfig: name=eth1 flags=0000  addr=(null) netmask=(null)
_ifconfig: name=eth2 flags=0000  addr=(null) netmask=(null)
catch_sig(0x0723): [watchdog] Handle WPS LED for WPS Stop
[1 preinit:init_nvram +385] init_nvram for model(41)
num_of_mssid_support(0x0088): [mssid] support [3] mssid
set_wltxpower_vtx(0x0a55): unit: 0, txpower: 100
set_wltxpower_vtx(0x0a56): unit: 1, txpower: 100
hotplug net INTERFACE=eth1 ACTION=remove
hotplug net INTERFACE=eth2 ACTION=remove
hotplug net INTERFACE=eth2 ACTION=remove
hotplug net INTERFACE=eth1 ACTION=remove
hotplug_net(): sent event 1
hotplug_net(): sent event 1
hotplug_net(): sent event 1
hotplug_net(): sent event 1
wl_module_init: passivemode set to 0x0
wl_module_init: igs set to 0x0
wl_module_init: txworkq set to 0x0
eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth1 ACTION=add
hotplug net INTERFACE=eth1 ACTION=add
eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth2 ACTION=add
hotplug net INTERFACE=eth2 ACTION=add
generate_wl_para(0x0acf): unit 0 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 3
generate_wl_para(0x0deb): obss_coex: 1
wlconf_pre(0x0f1a): set vhtmode 1
generate_wl_para(0x0acf): unit 1 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 7
generate_wl_para(0x0deb): obss_coex: 0
wlconf_pre(0x0f1a): set vhtmode 1
vlan1: cmd=14: Operation not supported
_ifconfig: name=vlan1 flags=1243 IFUP addr=(null) netmask=(null)
_ifconfig: name=eth1 flags=1243 IFUP addr=(null) netmask=(null)
generate_wl_para(0x0acf): unit 0 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 3
generate_wl_para(0x0deb): obss_coex: 1
generate_wl_para(0x0acf): unit 0 subunit 1
generate_wl_para(0x0acf): unit 0 subunit 2
generate_wl_para(0x0acf): unit 0 subunit 3

_ifconfig: name=eth2 flags=1243 IFUP addr=(null) netmask=(null)
generate_wl_para(0x0acf): unit 1 subunit -1
num_of_mssid_support(0x0088): [mssid] support [3] mssid
generate_wl_para(0x0de2): bw: 0
generate_wl_para(0x0de4): chanspec: 0
generate_wl_para(0x0de5): bw_cap: 7
generate_wl_para(0x0deb): obss_coex: 0
generate_wl_para(0x0acf): unit 1 subunit 1
generate_wl_para(0x0acf): unit 1 subunit 2
generate_wl_para(0x0acf): unit 1 subunit 3

acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...

<****>freeze the duck, 8s left!
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1009 (9)
acsd: Adjusted channel spec: 0x1009 (9)
acsd: selected DFS-exit channel spec: 0x1009 (9)
acsd: selected channel spec: 0x1009 (9)
acsd: Adjusted channel spec: 0x1009 (9)
acsd: selected channel spec: 0x1009 (9)
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected DFS-exit channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
acsd: Adjusted channel spec: 0xe09b (149/80)
acsd: selected channel spec: 0xe09b (149/80)
vlan1: cmd=14: Operation not supported
Not repeater mode, do not start_wlcconnect
goto again(1)...
cmd[0]=restart_time
[1 preinit:handle_notifications +394] running: 3 time
start_logger:
starting ntp...
writting prerouting eth0 0.0.0.0 eth0 0.0.0.0 br0 192.168.1.1
[1 preinit:filter_setting +394] write porttrigger
[1 preinit:filter_setting +394] write wl filter
[1 preinit:filter_setting +394] write url filter

<****>freeze the duck, 3s left!
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
handle_notifications() end
[1 preinit:init_main +394] recv signal 14 from pid [1:/sbin/preinit] (from user)
[1 preinit:init_main +394] recv signal 14 from pid [1:/sbin/preinit] (from user)
[1 preinit:init_main +396] recv signal 14 from pid [1:/sbin/preinit] (from user)
apply: change_wl_unit device-map/router.asp?time=1609491899
udhcpc_wan:: leasefail
apply: change_wl_unit device-map/router.asp?time=1609491908
apply: change_wl_unit device-map/router.asp?time=1609491912
apply: change_wl_unit device-map/router.asp?time=1609491914
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail


我的恩山、我的无线 The best wifi forum is right here.
2#
发表于 2020-12-5 15:13 | 只看该作者
支持楼主!!
来自安卓客户端来自安卓客户端
我的恩山、我的无线 The best wifi forum is right here.
3#
发表于 2020-12-7 08:35 | 只看该作者
支持楼主,等试用反馈
我的恩山、我的无线 The best wifi forum is right here.
4#
发表于 2020-12-27 11:29 | 只看该作者
谢谢楼主!!
我的恩山、我的无线 The best wifi forum is right here.
5#
发表于 2020-12-29 20:17 | 只看该作者

谢谢楼主!!
我的恩山、我的无线 The best wifi forum is right here.
6#
发表于 2021-1-4 20:28 | 只看该作者
腾达AC15 华硕固件
我的恩山、我的无线 The best wifi forum is right here.
7#
发表于 2021-1-4 20:29 | 只看该作者
链接掉了。。。
我的恩山、我的无线 The best wifi forum is right here.
8#
发表于 2021-1-11 11:46 | 只看该作者
hao............hao
我的恩山、我的无线 The best wifi forum is right here.
9#
发表于 2021-1-18 14:57 | 只看该作者
380.70版本,
我的恩山、我的无线 The best wifi forum is right here.
10#
发表于 2021-1-18 17:15 | 只看该作者
看看看看看看看看看看看看看看
我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )|网站地图

GMT+8, 2021-1-19 16:19

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表