|
|
本帖最后由 65656543 于 2021-4-19 11:02 编辑
下载地址：1ba0https://wwr.lanzous.com/i1J9go9n9te
更新日志：
386.2_2 (13-Apr-2021)
- FIXED: IPv6 pings were blocked if sent below the rate limit
instead of above (issue introduced in 42095)
- FIXED: kernel debuging log entry (was removed) (RT-AC86U)
- FIXED: Field that accepted a float value would reject
values equal to the allowed minimum (for example
the QoS bandwidth limits)
- FIXED: QoS Bandwidth settings were hidden on
non-HND models when accessing the QoS page.
- CHANGED: Tweaks to the Firmware Upgrade page display.
- CHANGED: Enabling DOS protection will now also rate limit
ICMPV6 echo (type 128) packets, like with IPv4.
386.2 (2-Apr-2021)
- NOTE: due to changes in how custom device icons are handled,
first time you boot with 386.2 you need to either
shift-reload the main index page, or clear your
browser cache.
- NEW: Added support for the GT-AX11000. Note that virtual** Fusion,
as well as the ROG-specific features such as the custom
UI are not supported.
- NEW: Added support for the RT-AX68U.
- NEW: Added jitterentropy-rngd daemon to HND routers. This will
ensure sufficient entropy is generated early on at
boot time, reducing boot stalls caused by insufficient
entropy for the kernel's random number generator,
and also generally improves security related to
crypto operations by the router.
- NEW: Added Cake QoS for HND routers. Note that just like
Traditional QoS, this is not compatible with hardware
acceleration, and therefore might not be usable on
connections faster than around 350 Mbps (may vary based
on router models).
- UPDATED: Merged GPL 386_42095.
- UPDATED: Openssl to 1.1.1k.
- UPDATED: Openvirtual** to 2.5.1.
- UPDATED: iproute2 to 5.11.0 (HND models).
- UPDATED: root certificate bundle to March 9th 2021.
- CHANGED: qos-start "init" user script now runs in blocking
mode to ensure it's able to complete any changes
it may apply to qos configs before these
configs get applied.
- FIXED: Router could get stuck at boot time after the user
migrated from stock firmware, or just erased his
JFFS partition, requiring a factory default reset.
- FIXED: ATM checkbox could not be enabled on QOS page.
- FIXED: DST not getting applied to some timezones (snauton)
- FIXED: Traditional QoS was broken in 386.1 (dave14305)
- FIXED: Connected IPSEC clients weren't shown on the virtual** Status
page.
- FIXED: Userspace conntrack tool was no longer working
- FIXED: Traffic Monitor spikes for HND models. (Asus backport)
- FIXED: webui incorrectly complaining about mismatched timezone
between browser and webui for some timezones (dave14305)
- REMOVED: SSH Brute Force Protection option (already handled
by Asuswrt's protect service daemon)
386.1_2 (12-Feb-2021)
- NEW: Added snmp support to the RT-AX86U.
- UPDATED: inadyn to 2.8.1.
- UPDATED: nano to 5.5.
- CHANGED: Use local OUI database instead of remote one hosted
on Asus's server (allows queries to work even when
accessing webui over https)
- CHANGED: If dropbear cannot create keys in /jffs then
create temporary ones in /etc so SSH can work even
without a working JFFS partition.
- FIXED: Missing Game Mode on RT-AC88U
- FIXED: Non-working 160 MHz settings for RT-AC88U region/versions
that should support it
- FIXED: Missing Instant Guard to RT-AX56U and RT-AC88U.
- FIXED: IPv6 ending with "::" were considered invalid on the
webui (was breaking the Prefix field on the 6in4 tunnel
page for instance).
- FIXED: OUI lookups on site survey page not working
(for non-HND models)
- FIXED: Wifi Radar missing on GT-AC2900
- FIXED: Netools-enabled pages not used by GT-AC2900 and
RT-AX86U
- FIXED: GeForce NOW UPNP not working
- FIXED: Erasing the JFFS partition would often require a second
reboot since the operation failed when encountering
a bad block. These are now properly skipped.
- FIXED: Parental Control's time scheduler not working properly.
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2021-4-19 10:56
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡