|
|
内核日志
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.10.36 (karlzheng@mzt17) (gcc version 4.8.3 20140401 (prerelease) (Buildroot 2014.08-00004-g242ea7b) ) #4 SMP Mon Mar 2 17:28:37 CST 2015
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: MZ-R10, model: BCM4708
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] map io
[ 0.000000] MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
[ 0.000000] BUG: mapping for 0x19020000 at 0xff100000 out of vmalloc space
[ 0.000000] mpcore_map_io periphbase ff100000
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c8212000 s6528 r8192 d13952 u32768
[ 0.000000] pcpu-alloc: s6528 r8192 d13952 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=ubi
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 128MB 128MB = 256MB total
[ 0.000000] Memory: 255648k/255648k available, 6496k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0353de4 (3376 kB)
[ 0.000000] .init : 0xc0354000 - 0xc038c980 ( 227 kB)
[ 0.000000] .data : 0xc038e000 - 0xc03af448 ( 134 kB)
[ 0.000000] .bss : 0xc03af448 - 0xc0401594 ( 329 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:256
[ 0.000000] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 8589ms
[ 0.000265] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[ 0.060042] pid_max: default: 32768 minimum: 301
[ 0.060200] Mount-cache hash table entries: 512
[ 0.060923] CPU: Testing write buffer coherency: ok
[ 0.061213] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.061247] 2 cores has been found
[ 0.061320] Setting up static identity map for 0xc0011100 - 0xc0011134
[ 0.062679] brcm_boot_secondary
[ 0.063137] CPU1: Booted secondary processor
[ 0.063142] brcm_secondary_init
[ 0.121279] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.121416] Brought up 2 CPUs
[ 0.121441] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
[ 0.127967] NET: Registered protocol family 16
[ 0.128553] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.130305] L310 cache controller enabled
[ 0.130323] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a130000, Cache size: 262144 B
[ 0.135478] bio: create slab <bio-0> at 0
[ 0.137582] Switching to clocksource arm_global_timer
[ 0.139377] NET: Registered protocol family 2
[ 0.139809] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.139851] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.139884] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.139931] TCP: reno registered
[ 0.139946] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.139975] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.140177] NET: Registered protocol family 1
[ 0.140211] PCI: CLS 0 bytes, default 32
[ 0.140397] PCI: no core
[ 0.140406] PCI: no core
[ 0.140442] PCI: scanning bus 0
[ 0.140702] PCI host bridge to bus 0000:00
[ 0.140724] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.140735] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.140747] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.140781] pci 0000:00:00.0: [14e4:0800] type 00 class 0x050100
[ 0.140805] pci 0000:00:00.0: reg 10: [mem 0x18000000-0x18000fff]
[ 0.140830] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.141057] pci 0000:00:01.0: [14e4:050b] type 00 class 0xffffff
[ 0.141080] pci 0000:00:01.0: reg 10: [mem 0x18001000-0x18001fff]
[ 0.141093] pci 0000:00:01.0: reg 14: [mem 0x18002000-0x18002fff]
[ 0.141115] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.141341] pci 0000:00:02.0: [14e4:0502] type 00 class 0xffffff
[ 0.141363] pci 0000:00:02.0: reg 10: [mem 0x1802c000-0x1802cfff]
[ 0.141388] pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.141584] pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
[ 0.141604] pci 0000:00:03.0: reg 10: [mem 0x18024000-0x18024fff]
[ 0.141629] pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.141801] pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
[ 0.141820] pci 0000:00:04.0: reg 10: [mem 0x18025000-0x18025fff]
[ 0.141844] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.142021] pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
[ 0.142041] pci 0000:00:05.0: reg 10: [mem 0x18026000-0x18026fff]
[ 0.142065] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.142226] pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
[ 0.142244] pci 0000:00:06.0: reg 10: [mem 0x18027000-0x18027fff]
[ 0.142268] pci 0000:00:06.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.142425] pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
[ 0.142444] pci 0000:00:07.0: reg 10: [mem 0x18012000-0x18012fff]
[ 0.142468] pci 0000:00:07.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.142648] pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
[ 0.142669] pci 0000:00:08.0: reg 10: [mem 0x18013000-0x18013fff]
[ 0.142693] pci 0000:00:08.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.142855] pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
[ 0.142874] pci 0000:00:09.0: reg 10: [mem 0x18014000-0x18014fff]
[ 0.142899] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.143072] pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
[ 0.143092] pci 0000:00:0a.0: reg 10: [mem 0x1800b000-0x1800bfff]
[ 0.143105] pci 0000:00:0a.0: reg 14: [mem 0x1800c000-0x1800cfff]
[ 0.143126] pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.143287] pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
[ 0.143305] pci 0000:00:0b.0: reg 10: [mem 0x18022000-0x18022fff]
[ 0.143330] pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.143494] pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
[ 0.143514] pci 0000:00:0b.1: reg 10: [mem 0x18021000-0x18021fff]
[ 0.143538] pci 0000:00:0b.1: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.143711] pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
[ 0.143729] pci 0000:00:0c.0: reg 10: [mem 0x18023000-0x18023fff]
[ 0.143753] pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.143922] pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
[ 0.143941] pci 0000:00:0d.0: reg 10: [mem 0x18020000-0x18020fff]
[ 0.143966] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.144133] pci 0000:00:0e.0: [14e4:4711] type 00 class 0x040100
[ 0.144152] pci 0000:00:0e.0: reg 10: [mem 0x1802a000-0x1802afff]
[ 0.144177] pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.144342] pci 0000:00:0f.0: [14e4:0506] type 00 class 0xffffff
[ 0.144363] pci 0000:00:0f.0: reg 10: [mem 0x18210000-0x1821ffff]
[ 0.144388] pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.144557] pci 0000:00:10.0: [14e4:0507] type 00 class 0xffffff
[ 0.144576] pci 0000:00:10.0: reg 10: [mem 0x18010000-0x18010fff]
[ 0.144600] pci 0000:00:10.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.144762] pci 0000:00:11.0: [14e4:0508] type 00 class 0xffffff
[ 0.144794] pci 0000:00:11.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.144965] pci 0000:00:12.0: [14e4:0509] type 00 class 0xffffff
[ 0.144985] pci 0000:00:12.0: reg 10: [mem 0x18028000-0x18028fff]
[ 0.145009] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.145177] pci 0000:00:13.0: [14e4:050a] type 00 class 0xffffff
[ 0.145196] pci 0000:00:13.0: reg 10: [mem 0x18029000-0x18029fff]
[ 0.145221] pci 0000:00:13.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.145381] PCI: Fixing up bus 0
[ 0.145493] Found a AMD NAND flash:
[ 0.145499] Total size: 128MB
[ 0.145505] Block size: 128KB
[ 0.145510] Page Size: 2048B
[ 0.145515] OOB Size: 64B
[ 0.145519] Sector size: 512B
[ 0.145523] Spare size: 16B
[ 0.145529] ECC level: 8 (8-bit)
[ 0.145536] Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
[ 0.420979] PCIE1 link=1
[ 0.421186] PCIE1 switching to GEN2
[ 0.670811] PCIE1 link=1
[ 0.671037] PCI host bridge to bus 0001:00
[ 0.671058] pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 0.671069] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.671099] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[ 0.671143] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.671343] PCI: Fixing up bus 0
[ 0.671357] PCI: bus0: Fast back to back transfers disabled
[ 0.671530] pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
[ 0.671559] pci 0001:01:00.0: reg 10: [mem 0x08000000-0x08007fff 64bit]
[ 0.671631] pci 0001:01:00.0: supports D1 D2
[ 0.671799] PCI: Fixing up bus 1
[ 0.671815] PCI: bus1: Fast back to back transfers disabled
[ 0.671829] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.671842] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.671916] pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
[ 0.671930] pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
[ 0.671947] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.671958] pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
[ 0.921949] PCIE2 link=1
[ 0.922197] PCIE2 switching to GEN2
[ 1.172082] PCIE2 link=1
[ 1.172326] PCI host bridge to bus 0002:00
[ 1.172344] pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
[ 1.172356] pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.172383] pci 0002:00:00.0: [14e4:8012] type 01 class 0x060400
[ 1.172428] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.172630] PCI: Fixing up bus 0
[ 1.172643] PCI: bus0: Fast back to back transfers disabled
[ 1.172822] pci 0002:02:00.0: [14e4:4360] type 00 class 0x028000
[ 1.172850] pci 0002:02:00.0: reg 10: [mem 0x40000000-0x40007fff 64bit]
[ 1.172922] pci 0002:02:00.0: supports D1 D2
[ 1.173109] PCI: Fixing up bus 2
[ 1.173124] PCI: bus2: Fast back to back transfers disabled
[ 1.173138] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.173152] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 02
[ 1.173234] pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
[ 1.173249] pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
[ 1.173266] pci 0002:00:00.0: PCI bridge to [bus 02]
[ 1.173276] pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
[ 1.423002] PCIE3 link=1
[ 1.423235] PCIE3 switching to GEN2
[ 1.672862] PCIE3 link=1
[ 1.673058] PCI host bridge to bus 0003:00
[ 1.673076] pci_bus 0003:00: root bus resource [mem 0x48000000-0x4fffffff]
[ 1.673086] pci_bus 0003:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.673112] pci 0003:00:00.0: [14e4:8012] type 01 class 0x060400
[ 1.673152] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.673343] PCI: Fixing up bus 0
[ 1.673356] PCI: bus0: Fast back to back transfers disabled
[ 1.673521] pci 0003:03:00.0: [1b21:0611] type 00 class 0x010185
[ 1.673546] pci 0003:03:00.0: reg 10: [io 0x0000-0x0007]
[ 1.673562] pci 0003:03:00.0: reg 14: [io 0x0000-0x0003]
[ 1.673577] pci 0003:03:00.0: reg 18: [io 0x0000-0x0007]
[ 1.673593] pci 0003:03:00.0: reg 1c: [io 0x0000-0x0003]
[ 1.673608] pci 0003:03:00.0: reg 20: [io 0x0000-0x000f]
[ 1.673625] pci 0003:03:00.0: reg 24: [mem 0x00000000-0x000001ff]
[ 1.673833] PCI: Fixing up bus 3
[ 1.673849] PCI: bus3: Fast back to back transfers disabled
[ 1.673863] pci_bus 0003:03: busn_res: [bus 03-ff] end is updated to 03
[ 1.673876] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 03
[ 1.673960] pci 0003:00:00.0: BAR 8: assigned [mem 0x48000000-0x480fffff]
[ 1.673975] pci 0003:03:00.0: BAR 5: assigned [mem 0x48000000-0x480001ff]
[ 1.673988] pci 0003:03:00.0: BAR 4: can't assign io (size 0x10)
[ 1.673999] pci 0003:03:00.0: BAR 0: can't assign io (size 0x8)
[ 1.674008] pci 0003:03:00.0: BAR 2: can't assign io (size 0x8)
[ 1.674017] pci 0003:03:00.0: BAR 1: can't assign io (size 0x4)
[ 1.674026] pci 0003:03:00.0: BAR 3: can't assign io (size 0x4)
[ 1.674036] pci 0003:00:00.0: PCI bridge to [bus 03]
[ 1.674047] pci 0003:00:00.0: bridge window [mem 0x48000000-0x480fffff]
[ 1.675173] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.675190] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.675348] msgmni has been set to 499
[ 1.675917] io scheduler noop registered
[ 1.675930] io scheduler deadline registered (default)
[ 1.676456] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.677071] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
[ 2.355221] console [ttyS0] enabled
[ 2.358967] of_serial: probe of 18000400.serial failed with error -28
[ 2.366620] bcmsflash: found no supported devices
[ 2.934214] Boot partition size = 524288(0x80000)
[ 2.938944] lookup_nflash_rootfs_offset: offset = 0x200000
[ 2.946230] nflash: squash filesystem with lzma found at block 25
[ 2.952346] Creating 5 MTD partitions on "nflash":
[ 2.957154] 0x000000000000-0x000000080000 : "boot"
[ 2.962713] 0x000000080000-0x000000200000 : "nvram"
[ 2.968326] 0x000000200000-0x000002000000 : "linux"
[ 2.973875] 0x00000033e400-0x000002000000 : "rootfs"
[ 2.979572] mtd: device 3 (rootfs) set to be root filesystem
[ 2.985251] 0x000002000000-0x000002080000 : "rdata"
[ 2.991090] bcm5301x_spi_probe: SPI controller found
[ 2.996276] bcm5301x-spi-master spi.2: master is unqueued, this is deprecated
[ 3.003830] bcm5301x_spi_probe: register SPI master success
[ 3.027651] i2c /dev entries driver
[ 3.031925] lm75 0-0048: hwmon0: sensor 'lm75'
[ 3.037419] bcma: bus0: Found chip with id 0xCF12, rev 0x00 and package 0x00
[ 3.044528] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 3.053102] bcma: bus0: Core 1 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[ 3.061055] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 3.069436] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 3.077820] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 3.086191] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 3.094574] bcma: bus0: Core 6 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 3.103128] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 3.111683] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 3.120241] bcma: bus0: Core 9 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 3.130188] bcma: bus0: Core 10 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[ 3.138570] bcma: bus0: Core 11 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[ 3.146947] bcma: bus0: Core 12 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 3.155152] bcma: bus0: Core 13 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[ 3.163189] bcma: bus0: Core 14 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 3.172527] bcma: bus0: Core 15 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 3.183260] bcma: bus0: Core 16 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[ 3.191291] bcma: bus0: Core 17 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 3.200891] bcma: bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 3.210416] bcma: bus0: Using fallback SPROM failed (err -2)
[ 3.216084] bcma: bus0: No SPROM available
[ 3.222317] bcma: bus0: GPIO driver not activated
[ 3.222448] bcma: bus0: Bus registered
[ 3.226550] TCP: cubic registered
[ 3.229923] NET: Registered protocol family 17
[ 3.234434] 8021q: 802.1Q VLAN Support v1.8
[ 3.250968] read security area off 0 len 256
[ 3.255258] rdata index 0 value R10WZOAN81D007D
[ 3.259818] dev_nvram_init nvram _et0macaddr not set
[ 3.264791] rdata index 1 missing
[ 3.268115] dev_nvram_init nvram _0:macaddr not set
[ 3.272999] rdata index 2 missing
[ 3.276316] dev_nvram_init nvram _1:macaddr not set
[ 3.281203] rdata index 3 missing
[ 3.286092] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[ 3.294899] NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[ 3.307390] Spare area=64 eccbytes 56, ecc bytes located at:
[ 3.313080] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[ 3.313080] Available 7 bytes at (off,len):
[ 3.331864] (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
[ 3.350618] Scanning device for bad blocks
[ 3.920902] Options: NO_SUBPAGE_WRITE,
[ 3.924679] Creating 1 MTD partitions on "brcmnand":
[ 3.929667] 0x000002080000-0x000008000000 : "ubi"
[ 3.935572] UBI: attaching mtd5 to ubi0
[ 4.565273] UBI: scanning is finished
[ 4.579596] UBI: attached mtd5 (name "ubi", size 95 MiB) to ubi0
[ 4.585626] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.592453] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.599190] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.606079] UBI: good PEBs: 764, bad PEBs: 0, corrupted PEBs: 0
[ 4.612022] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.619178] UBI: max/mean erase counter: 33/24, WL threshold: 4096, image sequence number: 140975024
[ 4.628341] UBI: available PEBs: 0, total reserved PEBs: 764, PEBs reserved for bad PEB handling: 20
[ 4.637500] UBI: background thread "ubi_bgt0d" started, PID 244
[ 4.648491] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 4.655740] Freeing unused kernel memory: 224K (c0354000 - c038c000)
[ 4.947121] External imprecise Data abort at addr=0xb6f8b008, fsr=0x1c06 ignored.
[ 6.356712] --using MAC: 38:bc:1a:4e:7b:51
[ 6.360909] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
[ 6.367824] bgmac bcma0:1: Support for Roboswitch not implemented
[ 6.374533] libphy: bgmac mii bus: probed
[ 6.379862] b53_common: found switch: BCM53012, rev 5
[ 6.385578] bgmac: Unsupported core_unit 1
[ 6.389725] bgmac: probe of bcma0:2 failed with error -524
[ 6.395232] bgmac: Unsupported core_unit 2
[ 6.399352] bgmac: probe of bcma0:3 failed with error -524
[ 6.404856] bgmac: Unsupported core_unit 3
[ 6.408968] bgmac: probe of bcma0:4 failed with error -524
[ 6.414613] bgmac: Broadcom 47xx GBit MAC driver loaded
[ 6.423928] usbcore: registered new interface driver usbfs
[ 6.429627] usbcore: registered new interface driver hub
[ 6.435112] usbcore: registered new device driver usb
[ 6.463597] SCSI subsystem initialized
[ 6.469870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.476974] ehci-platform: EHCI generic platform driver
[ 6.486388] libata version 3.00 loaded.
[ 6.488307] ahci 0003:03:00.0: version 3.0
[ 6.488332] PCI: Enabling device 0003:03:00.0 (0140 -> 0142)
[ 6.494067] ahci: SSS flag set, parallel bus scan disabled
[ 6.499633] ahci 0003:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 6.507674] ahci 0003:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 6.517697] scsi0 : ahci
[ 6.520669] scsi1 : ahci
[ 6.523521] ata1: SATA max UDMA/133 abar m512@0x48000000 port 0x48000100 irq 175
[ 6.530961] ata2: SATA max UDMA/133 abar m512@0x48000000 port 0x48000180 irq 175
[ 6.887654] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.237646] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.244179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.250647] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 7.255917] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 7.263384] ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000
[ 7.332163] hub 1-0:1.0: USB hub found
[ 7.335936] hub 1-0:1.0: 2 ports detected
[ 7.342019] usbcore: registered new interface driver usb-storage
[ 9.184822] UBIFS: background thread "ubifs_bgt0_0" started, PID 336
[ 9.217759] UBIFS: recovery needed
[ 9.450789] UBIFS: recovery completed
[ 9.454546] UBIFS: mounted UBI device 0, volume 0, name "rootfs_data"
[ 9.461021] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.470181] UBIFS: FS size: 92565504 bytes (88 MiB, 729 LEBs), journal size 4698112 bytes (4 MiB, 37 LEBs)
[ 9.479863] UBIFS: reserved for root: 4372097 bytes (4269 KiB)
[ 9.485713] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6DAF28F2-BED3-4AD7-8452-1DECA65A3D17, small LPT model
[ 10.632164] NET: Registered protocol family 10
[ 10.648234] nf_conntrack version 0.5.0 (3998 buckets, 15992 max)
[ 10.657063] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.673088] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.680654] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.800780] usbcore: registered new interface driver usbhid
[ 10.806372] usbhid: USB HID core driver
[ 10.811383] usbcore: registered new interface driver usblp
[ 10.824275] xt_time: kernel timezone is -0000
[ 10.832205] PPP generic driver version 2.4.2
[ 10.837653] NET: Registered protocol family 24
[ 14.039289] emf: module license 'Proprietary' taints kernel.
[ 14.044967] Disabling lock debugging due to kernel taint
[ 14.900800] wl_module_init: passivemode set to 0x0
[ 14.905611] wl_module_init: txworkq set to 0x0
[ 14.942351] wl0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.106 (r487025)
[ 14.961899] wl1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.106 (r487025)
[ 61.878694] device eth0.1 entered promiscuous mode
[ 61.883501] device eth0 entered promiscuous mode
[ 61.889201] br-lan: port 1(eth0.1) entered forwarding state
[ 61.894812] br-lan: port 1(eth0.1) entered forwarding state
[ 63.887655] br-lan: port 1(eth0.1) entered forwarding state
[ 68.410031] device wl0 entered promiscuous mode
[ 68.414758] br-lan: port 2(wl0) entered forwarding state
[ 68.420193] br-lan: port 2(wl0) entered forwarding state
[ 68.595771] device wl0.1 entered promiscuous mode
[ 68.600716] br-lan: port 3(wl0.1) entered forwarding state
[ 68.606287] br-lan: port 3(wl0.1) entered forwarding state
[ 69.771866] device wl1 entered promiscuous mode
[ 69.776562] br-lan: port 4(wl1) entered forwarding state
[ 69.781991] br-lan: port 4(wl1) entered forwarding state
[ 69.984634] nas calls setitimer() with new_value NULL pointer. Misfeature support will be removed
[ 70.417660] br-lan: port 2(wl0) entered forwarding state
[ 70.597663] br-lan: port 3(wl0.1) entered forwarding state
[ 71.777668] br-lan: port 4(wl1) entered forwarding state
[ 103.710348] nf_conntrack: table full, dropping packet
[ 115.049029] nf_conntrack: table full, dropping packet
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2019-4-1 22:44
显身卡
密码你能进吗
1