【成功驱动N1无线】N1 OpenWRT wifi 无线芯片CYW43455 有人驱动起来不？

橙子***

chenk77889 发表于 2019-5-25 07:22
我可以告诉你！n1无线开启后！做主路由wifi是不能用的！！我可以保证

你这样好奇怪，说的自己用过一样，既然这样，能否提供一个可用的固件给我们对比一下。

hc***

树莓派编译过了，只有img，么么哒不会了，还是用armv8试试看看，不过这个无线真的很小，只能玩玩，正道还是发挥飞檐走壁的功能

橙子***

hcyme 发表于 2019-5-25 08:31
树莓派编译过了，只有img，么么哒不会了，还是用armv8试试看看，不过这个无线真的很小，只能玩玩，正道还是 ...

如果自己真能驱动，买根天线，打个洞换个接盒子上就可以了。

橙子***

yj496538874 发表于 2019-5-25 01:32
已关注这个帖子，N1的wifi能解决的话   K3都可以退休了

谢谢支持，有结果会及时告诉大家。

夜未***

祝你成功，期待很久了

hc***

肯定成功，只不过是瞎猫还没碰上死耗斯

jsh***

WhereToTearDown 发表于 2019-5-24 12:08
把内核日志发来看看

拿自己编译的 Lede BCM2710 的 rootfs 混了 Armbian_5.77_Aml-s905_Ubuntu_bionic_default_5.0.2_20190401.img，启动后没无线，内核日志如下：

1. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
   
2. [    0.000000] Linux version 5.0.2-aml-s905 (root@vbox) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #5.77 SMP PREEMPT Mon Apr 1 17:23:16 MSK 2019
   
3. [    0.000000] Machine model: Phicomm N1
   
4. [    0.000000] Reserved memory: created CMA memory pool at 0x000000003b400000, size 896 MiB
   
5. [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
   
6. [    0.000000] On node 0 totalpages: 486144
   
7. [    0.000000]   DMA32 zone: 7616 pages used for memmap
   
8. [    0.000000]   DMA32 zone: 0 pages reserved
   
9. [    0.000000]   DMA32 zone: 486144 pages, LIFO batch:63
   
10. [    0.000000] psci: probing for conduit method from DT.
    
11. [    0.000000] psci: PSCIv0.2 detected in firmware.
    
12. [    0.000000] psci: Using standard PSCI v0.2 function IDs
    
13. [    0.000000] psci: Trusted OS migration not required
    
14. [    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x400 with crng_init=0
    
15. [    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55448 r8192 d30568 u94208
    
16. [    0.000000] pcpu-alloc: s55448 r8192 d30568 u94208 alloc=23*4096
    
17. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    
18. [    0.000000] Detected VIPT I-cache on CPU0
    
19. [    0.000000] CPU features: detected: ARM erratum 845719
    
20. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 478528
    
21. [    0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
    
22. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    
23. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    
24. [    0.000000] Memory: 956008K/1944576K available (13502K kernel code, 1124K rwdata, 4396K rodata, 576K init, 790K bss, 71064K reserved, 917504K cma-reserved)
    
25. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    
26. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
    
27. [    0.000000] rcu:         RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    
28. [    0.000000]         Tasks RCU enabled.
    
29. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
    
30. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    
31. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
    
32. [    0.000000] GIC: Using split EOI/Deactivate mode
    
33. [    0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
    
34. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
    
35. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
    
36. [    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
    
37. [    0.000363] Console: colour dummy device 80x25
    
38. [    0.000634] printk: console [tty0] enabled
    
39. [    0.000668] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
    
40. [    0.000687] pid_max: default: 32768 minimum: 301
    
41. [    0.000766] LSM: Security Framework initializing
    
42. [    0.000780] SELinux:  Disabled at boot.
    
43. [    0.000789] AppArmor: AppArmor disabled by boot time parameter
    
44. [    0.000851] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    
45. [    0.000871] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    
46. [    0.024010] ASID allocator initialised with 32768 entries
    
47. [    0.031996] rcu: Hierarchical SRCU implementation.
    
48. [    0.048048] smp: Bringing up secondary CPUs ...
    
49. [    0.080244] Detected VIPT I-cache on CPU1
    
50. [    0.080291] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
    
51. [    0.112285] Detected VIPT I-cache on CPU2
    
52. [    0.112322] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
    
53. [    0.144335] Detected VIPT I-cache on CPU3
    
54. [    0.144373] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
    
55. [    0.144437] smp: Brought up 1 node, 4 CPUs
    
56. [    0.144500] SMP: Total of 4 processors activated.
    
57. [    0.144512] CPU features: detected: 32-bit EL0 Support
    
58. [    0.144523] CPU features: detected: CRC32 instructions
    
59. [    0.144798] CPU: All CPU(s) started at EL2
    
60. [    0.144820] alternatives: patching kernel code
    
61. [    0.145522] devtmpfs: initialized
    
62. [    0.149737] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    
63. [    0.149772] futex hash table entries: 1024 (order: 4, 65536 bytes)
    
64. [    0.172948] xor: measuring software checksum speed
    
65. [    0.212350]    8regs     :  2303.000 MB/sec
    
66. [    0.252378]    32regs    :  2831.000 MB/sec
    
67. [    0.292408]    arm64_neon:  2459.000 MB/sec
    
68. [    0.292417] xor: using function: 32regs (2831.000 MB/sec)
    
69. [    0.292472] pinctrl core: initialized pinctrl subsystem
    
70. [    0.293289] NET: Registered protocol family 16
    
71. [    0.293700] audit: initializing netlink subsys (disabled)
    
72. [    0.293857] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1
    
73. [    0.294447] cpuidle: using governor menu
    
74. [    0.294772] vdso: 2 pages (1 code [url=home.php?mod=space&uid=162986]@[/url] (____ptrval____), 1 data @ (____ptrval____))
    
75. [    0.294792] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
    
76. [    0.297220] DMA: preallocated 256 KiB pool for atomic allocations
    
77. [    0.297864] Serial: AMBA PL011 UART driver
    
78. [    0.308850] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
    
79. [    0.308874] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
    
80. [    0.308887] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
    
81. [    0.308899] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
    
82. [    0.309301] cryptd: max_cpu_qlen set to 1000
    
83. [    0.309627] raid6: using algorithm neonx8 gen() 0 MB/s
    
84. [    0.309646] raid6: .... xor() 0 MB/s, rmw enabled
    
85. [    0.309656] raid6: using neon recovery algorithm
    
86. [    0.309780] fbcon: Taking over console
    
87. [    0.311108] SCSI subsystem initialized
    
88. [    0.311274] usbcore: registered new interface driver usbfs
    
89. [    0.311310] usbcore: registered new interface driver hub
    
90. [    0.311376] usbcore: registered new device driver usb
    
91. [    0.311710] pps_core: LinuxPPS API ver. 1 registered
    
92. [    0.311721] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    
93. [    0.311744] PTP clock support registered
    
94. [    0.311847] EDAC MC: Ver: 3.0.0
    
95. [    0.312320] Advanced Linux Sound Architecture Driver Initialized.
    
96. [    0.312749] NetLabel: Initializing
    
97. [    0.312767] NetLabel:  domain hash size = 128
    
98. [    0.312775] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
    
99. [    0.312831] NetLabel:  unlabeled traffic allowed by default
    
100. [    0.313213] clocksource: Switched to clocksource arch_sys_counter
     
101. [    0.313379] VFS: Disk quotas dquot_6.6.0
     
102. [    0.313433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
     
103. [    0.313528] FS-Cache: Loaded
     
104. [    0.317958] NET: Registered protocol family 2
     
105. [    0.318397] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
     
106. [    0.318439] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
     
107. [    0.318555] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
     
108. [    0.318776] TCP: Hash tables configured (established 16384 bind 16384)
     
109. [    0.318901] UDP hash table entries: 1024 (order: 3, 32768 bytes)
     
110. [    0.318953] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
     
111. [    0.319133] NET: Registered protocol family 1
     
112. [    0.319529] RPC: Registered named UNIX socket transport module.
     
113. [    0.319549] RPC: Registered udp transport module.
     
114. [    0.319558] RPC: Registered tcp transport module.
     
115. [    0.319567] RPC: Registered tcp NFSv4.1 backchannel transport module.
     
116. [    0.319583] NET: Registered protocol family 44
     
117. [    0.319732] Trying to unpack rootfs image as initramfs...
     
118. [    0.657571] Freeing initrd memory: 8452K
     
119. [    0.658248] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
     
120. [    0.658528] kvm [1]: 8-bit VMID
     
121. [    0.658539] kvm [1]: IPA Size Limit: 40bits
     
122. [    0.659046] kvm [1]: vgic interrupt IRQ1
     
123. [    0.659136] kvm [1]: Hyp mode initialized successfully
     
124. [    0.795552] Initialise system trusted keyrings
     
125. [    0.795718] workingset: timestamp_bits=46 max_order=19 bucket_order=0
     
126. [    0.799630] zbud: loaded
     
127. [    0.800834] squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
128. [    0.801052] FS-Cache: Netfs 'nfs' registered for caching
     
129. [    0.801554] NFS: Registering the id_resolver key type
     
130. [    0.801587] Key type id_resolver registered
     
131. [    0.801596] Key type id_legacy registered
     
132. [    0.801610] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
     
133. [    0.801622] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
     
134. [    0.802345] FS-Cache: Netfs 'cifs' registered for caching
     
135. [    0.802594] Key type cifs.spnego registered
     
136. [    0.802615] Key type cifs.idmap registered
     
137. [    0.802634] ntfs: driver 2.1.32 [Flags: R/W].
     
138. [    0.803108] JFS: nTxBlock = 8192, nTxLock = 65536
     
139. [    0.806849] SGI XFS with ACLs, security attributes, realtime, no debug enabled
     
140. [    0.808239] ocfs2: Registered cluster interface o2cb
     
141. [    0.808417] OCFS2 User DLM kernel interface loaded
     
142. [    0.809891] gfs2: GFS2 installed
     
143. [    0.949246] Key type asymmetric registered
     
144. [    0.949269] Asymmetric key parser 'x509' registered
     
145. [    0.949331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
     
146. [    0.949502] io scheduler mq-deadline registered
     
147. [    0.949516] io scheduler kyber registered
     
148. [    0.949660] io scheduler bfq registered
     
149. [    0.960907] meson_vid_pll_div_recalc_rate: Invalid config value for vid_pll_div
     
150. [    0.963293] soc soc0: Amlogic Meson GXL (Unknown) Revision 21:d (4:2) Detected
     
151. [    0.966003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
     
152. [    0.967164] Serial: AMBA driver
     
153. [    0.967471] c11084c0.serial: ttyAML1 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart
     
154. [    0.967589] serial serial0: tty port ttyAML1 registered
     
155. [    0.967772] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 13, base_baud = 1500000) is a meson_uart
     
156. [    1.808183] printk: console [ttyAML0] enabled
     
157. [    1.815937] brd: module loaded
     
158. [    1.819854] loop: module loaded
     
159. [    1.821107] libphy: Fixed MDIO Bus: probed
     
160. [    1.823000] tun: Universal TUN/TAP device driver, 1.6
     
161. [    1.829284] meson8b-dwmac c9410000.ethernet: PTP uses main clock
     
162. [    1.833611] meson8b-dwmac c9410000.ethernet: no reset control found
     
163. [    1.840261] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
     
164. [    1.846895] meson8b-dwmac c9410000.ethernet:         DWMAC1000
     
165. [    1.852061] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
     
166. [    1.859477] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
     
167. [    1.866894] meson8b-dwmac c9410000.ethernet: COE Type 2
     
168. [    1.872067] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
     
169. [    1.879053] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
     
170. [    1.885465] meson8b-dwmac c9410000.ethernet: Normal descriptors
     
171. [    1.891303] meson8b-dwmac c9410000.ethernet: Ring mode enabled
     
172. [    1.897080] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
     
173. [    2.945242] libphy: stmmac: probed
     
174. [    2.946110] VFIO - User Level meta-driver version: 0.3
     
175. [    2.948867] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
     
176. [    2.955162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
177. [    2.960142] ehci-platform: EHCI generic platform driver
     
178. [    2.965423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
179. [    2.971411] ohci-platform: OHCI generic platform driver
     
180. [    2.977058] usbcore: registered new interface driver usb-storage
     
181. [    2.983671] mousedev: PS/2 mouse device common for all mice
     
182. [    2.988590] i2c /dev entries driver
     
183. [    2.993089] sdhci: Secure Digital Host Controller Interface driver
     
184. [    2.997638] sdhci: Copyright(c) Pierre Ossman
     
185. [    3.002050] Synopsys Designware Multimedia Card Interface Driver
     
186. [    3.008647] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
187. [    3.014745] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
188. [    3.021607] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
189. [    3.028111] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
190. [    3.035008] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.3
     
191. [    3.041515] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.2
     
192. [    3.048301] meson-gx-mmc d0072000.mmc: Got CD GPIO
     
193. [    3.079836] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.4
     
194. [    3.081131] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.2
     
195. [    3.087958] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
     
196. [    3.120408] sdhci-pltfm: SDHCI platform and OF driver helper
     
197. [    3.121232] ledtrig-cpu: registered to indicate activity on CPUs
     
198. [    3.126808] meson-sm: secure-monitor enabled
     
199. [    3.130853] hidraw: raw HID events driver (C) Jiri Kosina
     
200. [    3.136240] usbcore: registered new interface driver usbhid
     
201. [    3.141533] usbhid: USB HID core driver
     
202. [    3.145610] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
     
203. [    3.152756] meson-saradc c1108680.adc: Linked as a consumer to regulator.1
     
204. [    3.162666] NET: Registered protocol family 17
     
205. [    3.165450] Key type dns_resolver registered
     
206. [    3.170040] registered taskstats version 1
     
207. [    3.173493] Loading compiled-in X.509 certificates
     
208. [    3.178342] zswap: loaded using pool lzo/zbud
     
209. [    3.183467] Btrfs loaded, crc32c=crc32c-generic
     
210. [    3.195040] Key type encrypted registered
     
211. [    3.205405] meson-drm d0100000.vpu: Queued 2 outputs on vpu
     
212. [    3.205723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
     
213. [    3.211930] [drm] No driver support for vblank timestamp query.
     
214. [    3.217973] meson-drm d0100000.vpu: CVBS Output connector not available
     
215. [    3.224422] meson-dw-hdmi c883a000.hdmi-tx: Linked as a consumer to regulator.5
     
216. [    3.257265] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
     
217. [    3.262007] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
     
218. [    3.269961] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
     
219. [    3.277240] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
     
220. [    3.293624] mmc1: new HS200 MMC card at address 0001
     
221. [    3.294636] mmcblk1: mmc1:0001 8GME4R 7.28 GiB
     
222. [    3.298101] mmcblk1boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
     
223. [    3.303968] mmcblk1boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
     
224. [    3.309351] mmcblk1rpmb: mmc1:0001 8GME4R partition 3 512 KiB, chardev (241:0)
     
225. [    3.317338]  mmcblk1: p1 p2
     
226. [    3.391469] random: fast init done
     
227. [    4.154032] Console: switching to colour frame buffer device 240x67
     
228. [    4.212586] meson-drm d0100000.vpu: fb0: DRM emulated frame buffer device
     
229. [    4.219721] libphy: mdio_mux: probed
     
230. [    4.225816] libphy: mdio_mux: probed
     
231. [    4.231534] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
     
232. [    4.231826] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
     
233. [    4.240748] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
     
234. [    4.248780] xhci-hcd xhci-hcd.0.auto: irq 37, io mem 0xc9000000
     
235. [    4.254852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
     
236. [    4.262791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
237. [    4.269941] usb usb1: Product: xHCI Host Controller
     
238. [    4.274770] usb usb1: Manufacturer: Linux 5.0.2-aml-s905 xhci-hcd
     
239. [    4.280806] usb usb1: SerialNumber: xhci-hcd.0.auto
     
240. [    4.286057] hub 1-0:1.0: USB hub found
     
241. [    4.289376] hub 1-0:1.0: 2 ports detected
     
242. [    4.293570] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
     
243. [    4.298759] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
     
244. [    4.306348] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
     
245. [    4.312933] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
     
246. [    4.320992] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
     
247. [    4.329111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
     
248. [    4.336268] usb usb2: Product: xHCI Host Controller
     
249. [    4.341095] usb usb2: Manufacturer: Linux 5.0.2-aml-s905 xhci-hcd
     
250. [    4.347134] usb usb2: SerialNumber: xhci-hcd.0.auto
     
251. [    4.352325] hub 2-0:1.0: USB hub found
     
252. [    4.355697] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
     
253. [    4.363822] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
254. [    4.369618] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
255. [    4.376480] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
256. [    4.382969] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
257. [    4.390083] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
     
258. [    4.405992] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
259. [    4.407401] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
260. [    4.414295] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
261. [    4.420779] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
262. [    4.429875] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
263. [    4.434160] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
264. [    4.441011] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
265. [    4.447509] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
266. [    4.454373] hctosys: unable to open rtc device (rtc0)
     
267. [    4.459331] VDDAO_3V3: disabling
     
268. [    4.462235] ALSA device list:
     
269. [    4.465149]   No soundcards found.
     
270. [    4.470876] Freeing unused kernel memory: 576K
     
271. [    4.485242] Run /init as init process
     
272. [    4.633281] usb 1-2: new high-speed USB device number 2 using xhci-hcd
     
273. [    4.786138] usb 1-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
     
274. [    4.793300] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
     
275. [    4.800365] usb 1-2: Product: Ultra
     
276. [    4.804916] usb 1-2: Manufacturer: SanDisk
     
277. [    4.809408] usb 1-2: SerialNumber: 4C531001330128100270
     
278. [    4.819551] usb-storage 1-2:1.0: USB Mass Storage device detected
     
279. [    4.826365] scsi host0: usb-storage 1-2:1.0
     
280. [    4.833000] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
281. [    4.838712] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
282. [    4.845540] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
283. [    4.852065] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
284. [    5.860279] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
     
285. [    5.929597] sd 0:0:0:0: [sda] 60751872 512-byte logical blocks: (31.1 GB/29.0 GiB)
     
286. [    5.931348] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.3
     
287. [    5.943153] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
     
288. [    5.943869] sd 0:0:0:0: [sda] Write Protect is off
     
289. [    5.949829] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
     
290. [    5.954451] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
     
291. [    5.961048] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.3
     
292. [    5.961364] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
     
293. [    5.980144]  sda: sda1 sda2
     
294. [    5.987372] sd 0:0:0:0: [sda] Attached SCSI removable disk
     
295. [    6.655052] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
     
296. [    6.836001] init: Console is alive
     
297. [    6.841402] init: - watchdog -
     
298. [   11.015368] random: crng init done
     
299. [   11.399558] kmodloader: loading kernel modules from /etc/modules-boot.d/*
     
300. [   11.435673] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
     
301. [   11.450903] init: - preinit -
     
302. [   11.666538] RTL8211F Gigabit Ethernet 0.2009087f:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.2009087f:00, irq=POLL)
     
303. [   11.685898] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
     
304. [   11.692618] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
     
305. [   14.754769] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
     
306. [   14.879018] mount_root: mounting /dev/root
     
307. [   14.899791] EXT4-fs (sda2): re-mounted. Opts: (null)
     
308. [   14.904814] mount_root: loading kmods from internal overlay
     
309. [   15.108465] kmodloader: loading kernel modules from //etc/modules-boot.d/*
     
310. [   15.120623] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
     
311. [   15.317573] block: attempting to load /etc/config/fstab
     
312. [   15.327270] block: unable to load configuration (fstab: Entry not found)
     
313. [   15.335664] block: no usable configuration
     
314. [   15.342706] urandom-seed: Seed file not found (/etc/urandom.seed)
     
315. [   15.364005] meson8b-dwmac c9410000.ethernet eth0: Link is Down
     
316. [   15.377056] procd: - early -
     
317. [   15.382713] procd: - watchdog -
     
318. [   15.914371] procd: - watchdog -
     
319. [   15.987602] procd: - ubus -
     
320. [   16.053226] procd: - init -
     
321. [   16.336635] kmodloader: loading kernel modules from /etc/modules.d/*
     
322. [   16.394455] Initializing XFRM netlink socket
     
323. [   16.406238] NET: Registered protocol family 15
     
324. [   16.546470] NET: Registered protocol family 10
     
325. [   17.347040] Segment Routing with IPv6
     
326. [   17.427568] gre: GRE over IPv4 demultiplexor driver
     
327. [   17.442769] ip_gre: GRE over IPv4 tunneling driver
     
328. [   17.767204] u32 classifier
     
329. [   17.772259]     Performance counters on
     
330. [   17.777211]     input device check on
     
331. [   17.782083]     Actions configured
     
332. [   17.803593] Mirror/redirect action on
     
333. [   17.848524] fuse init (API version 7.28)
     
334. [   17.904632] usbcore: registered new interface driver usblp
     
335. [   17.922000] xt_time: kernel timezone is -0000
     
336. [   17.953995] cfg80211: Loading compiled-in X.509 certificates for regulatory database
     
337. [   18.361298] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
     
338. [   18.410375] PPP generic driver version 2.4.2
     
339. [   18.416435] PPP MPPE Compression module registered
     
340. [   18.422345] NET: Registered protocol family 24
     
341. [   18.466240] usbcore: registered new interface driver brcmfmac
     
342. [   18.484779] kmodloader: done loading kernel modules from /etc/modules.d/*
     
343. [   44.941028] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
     
344. [   44.964176] EXT4-fs (mmcblk1p2): recovery complete
     
345. [   44.969273] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts:
     
346. [   45.705598] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
     
347. [   45.732976] RTL8211F Gigabit Ethernet 0.2009087f:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.2009087f:00, irq=POLL)
     
348. [   45.757282] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
     
349. [   45.768034] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
     
350. [   45.776244] br-lan: port 1(eth0) entered blocking state
     
351. [   45.781761] br-lan: port 1(eth0) entered disabled state
     
352. [   45.787365] device eth0 entered promiscuous mode
     
353. [   47.841940] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
     
354. [   47.850289] br-lan: port 1(eth0) entered blocking state
     
355. [   47.855603] br-lan: port 1(eth0) entered forwarding state
     
356. [   47.861039] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
     

复制代码

hc***

呵呵，大佬聚首，指日可待，我早上用树莓派编译大雕的还是不行，模块已经加载，再加载也看不到

fish***

支持大神继续研究

jdw***

支持大神继续研究,我们只能 等待固件出现

熟悉***

支持大神继续研究,祝早日成功。

25***

支持大神继续研究,祝早日成功。

橙子***

2578 发表于 2019-5-26 01:20
支持大神继续研究,祝早日成功。

已成功

小***

希望早点出教程，造福大家

jeff4***

强大的楼主，坐等带无线固件