全新H218N——————————————刷机方法不同于RG200E-CA

jia***

这个和墓碑也差不多

dth***

不喜欢圆不流丢的外形，还是墓碑好看，都延用几千年的造型了，符合人类审美观。

mikes***

中兴H218N BCM5358

myfai***

还是墓碑好 有开关 直接关无线

shuq***

早知淘这款了，RG200E-CA样子像座墓碑，想换个外壳都不容易
SC518 发表于 2011-12-22 02:01

bingh***

CPU配置很给力的啊 怕热量的问题严重不严重//

push***

RG-200E最可恨的就是没有jtag接口,我的变砖了,正琢磨买编程器呢

liu***

楼上要是自己往返邮,我帮你吹下来,写上

SC***

还是墓碑好 有开关 直接关无线
myfaint007 发表于 2011-12-23 08:24

刷了TT后无线开关没用了吧 ，我一般都在定时任务里设定关无线

ego***

可以刷官方TT吗?

qy***

木有wan口 怎么搞？

axis***

价格是淘宝118块包邮（全新）硬件配置同RG200E-CA

上个卖家链接,我不是托啊,不要喷我
http://item.taobao.com/item.htm?id=14781232421

优点:板上有JTAG孔可以焊上(这样不怕刷死),RG200E-CA没有JTAG

做工 ...
liujun 发表于 2011-12-22 22:01

这贴已经被那个卖家完全复制了
貌似我是第一个吃他家螃蟹的，便宜不少

silver***

请问下我H218N刷成功了，但有线不通，只能无线连接，基本设置中，网络设置里面只有三个大标题，其他全空白，我要如何设置呢？

Decompressing...done


CFE version 5.60.120.9  based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 2011骞05鏈04鏃鏄熸湡涓15:32:36 CST (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found a 16MB ST compatible serial flash
[CFE][boot][ST Serial flash offset 00000000 size 128KB]
[CFE][trx][ST Serial flash offset 00020000 size 1KB]
[CFE][os][ST Serial flash offset 0002001C size 16224KB]
[CFE][nvram][ST Serial flash offset 00FF8000 size 32KB]
[CFE][boot][ST Serial flash offset 00000000 size 128KB]
[CFE][trx0][ST Serial flash offset 00020000 size 1KB]
[CFE][os0][ST Serial flash offset 0002001C size 8832KB]
[CFE][trx1][ST Serial flash offset 008C0000 size 1KB]
[CFE][os1][ST Serial flash offset 008C001C size 7392KB]
[CFE][nvram][ST Serial flash offset 00FF8000 size 32KB]
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.9
CPU type 0x19749: 500MHz
Tot mem: 65536 KBytes

CFE mem:    0x80700000 - 0x8079A7D0 (632784)
Data:       0x807306D0 - 0x80733850 (12672)
BSS:        0x80733850 - 0x807347D0 (3968)
Heap:       0x807347D0 - 0x807987D0 (409600)
Stack:      0x807987D0 - 0x8079A7D0 (8192)
Text:       0x80700000 - 0x807306C8 (198344)

Device eth0:  hwaddr 00-90-4C-01-60-01, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
cur=
buf=go;
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
Boot from big image !!
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #1 Wed Nov 23 04:56:55 CST 2011
CPU revision is: 00019749
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal          0 ->    16384
  HighMem     16384 ->    16384
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Built 1 zonelists.  Total pages: 16384
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5357 rev 1 pkg 9 at 500 MHz
Using 250.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61336k/65536k available (33k kernel code, 4144k reserved, 2701k data, 124k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: no core
PCI: no core
PCI: Fixing up bus 0
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.18.3
PPTP driver version 0.8.5
pflash: found no supported devices
Creating 5 MTD partitions on "sflash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x00ff0000 : "linux"
0x00106800-0x006a0000 : "rootfs"
0x006a0000-0x00ff0000 : "jffs2"
0x00ff0000-0x01000000 : "nvram"
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.eu.org/~quaker/ipt_account/
net/ipv4/netfilter/tomato_ct.c [Nov 23 2011 04:55:51]
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 124k freed


Hit ENTER for console...

emf: module license 'Proprietary' taints kernel.
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9
wl_module_init: passivemode set to 0x0
eth1: Broadcom BCM4347 802.11 Wireless Controller 5.100.138.9
/ # lo: File exists

/ #

3838***

现在可以买烽火HG320，一样的配置，价格比这个便宜
自从能刷TT后，淘宝奸商们价格见风就涨

gw1***

这价格没优势