|
楼主 |
发表于 2022-1-19 23:10
|
显示全部楼层
??????z?<? p???8? ???x^? ?????????
???@??
F0: 102B 0000
FA: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [0000]
T0: 0000 013D [010F]
Jump to BL
NOTICE: BL2: v2.5(release):211125_xdr6020mv2_r5-dirty
NOTICE: BL2: Built : 12:34:27, Nov 16 2021
NOTICE: WDT: disabled
NOTICE: EMI: Using DDR3 settings
NOTICE: EMI: Detected DRAM size: 512MB
NOTICE: EMI: complex R/W mem test passed
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.5(release):211125_xdr6020mv2_r5-dirty
NOTICE: BL31: Built : 12:34:27, Nov 16 2021
U-Boot 2021.10-rc1 (Nov 16 2021 - 12:34:27 +0000)
CPU: MediaTek MT7986
Model: mt7986-rfb
DRAM: 512 MiB
WDT: Not found!
Loading Environment from SPIFlash... SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0xb0000, size 0xd0
SF: 208 bytes @ 0xb0000 Read: OK
verifying partition...
copy the full partition to ram ...
device 0 offset 0x80000, size 0x30000
SF: 196608 bytes @ 0x80000 Read: OK
ok
verifying partition...
copy the full partition to ram ...
device 0 offset 0xb0200, size 0xcffe00
SF: 13630976 bytes @ 0xb0200 Read: OK
ok
SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0xb0000, size 0x200
SF: 512 bytes @ 0xb0000 Read: OK
device 0 offset 0x80000, size 0x30000
SF: 196608 bytes @ 0x80000 Read: OK
boot image at 41000000
U-Boot 2021.10-rc1 (Nov 16 2021 - 12:34:27 +0000)
CPU: MediaTek MT7986
Model: mt7986-rfb
DRAM: 512 MiB
WDT: Not found!
Loading Environment from SPIFlash... SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0xb0000, size 0x200
SF: 512 bytes @ 0xb0000 Read: OK
SF: Detected en25qh128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Reading from 0xb0200 to 0x4007ff28, size 0x100 ... OK
Reading from 0xb0200 to 0x4007ff28, size 0x3b75f0 ... OK
## Loading kernel from FIT Image at 4007ff28 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-5.4.137
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x40080010
Data Size: 3875500 Bytes = 3.7 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x44080000
Entry Point: 0x44080000
Hash algo: crc32
Hash value: d97cb124
Hash algo: sha1
Hash value: 78ebb7a1ec5f5d530092d2f0b3a5eb1cab7164ac
## Loading fdt from FIT Image at 4007ff28 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt xdr6020mv2 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x404323f8
Data Size: 19436 Bytes = 19 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 7bf0c930
Hash algo: sha1
Hash value: 73fcf39964c3ad7ad34e2453515acfd4c26d6bc3
Booting using the fdt blob at 0x404323f8
Uncompressing Kernel Image
Loading Device Tree to 000000005fff8000, end 000000005ffffbeb ... OK
Starting kernel ...
- preinit -
- regular preinit -
switching to jffs2
- init -
Please press Enter to activate this console. mcbAlignFromPool(219). Fail to alloc 607200 bytes from mcb Generic, alloc from heap [<0x7fa9cba020>].
checkOrResetFactoryInfo(913). Factory Info verified
<ucconv> usrconfPathPrepare(37). /tmp/etc/config doesn't exit, Now create it.
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
[wanPortDetectCheckAllLan:87] sysModeGetWorkMode: 4
deviceInfoInit(785). softver:1.0.9 Build 211229 Rel.23611n
[wireless]priv_cmd_table_get[205]invalid priv cmd table
[wireless]driver_if_init[286]error code is: -1
[wireless]driver_if_init[287]get iwpriv cmd table failed!
ioctl[iwpriv ra0 set setMacAddr=98:97:CC:62:7A:C1] failed Network is down
ioctl[iwpriv rax0 set setMacAddr=98:97:CC:62:7A:C3] failed No such device
br_scan_ifaces(47). Scanning bridge netif...
pair_allow_ext(1061). [mapd] allow RE with almac 98:97:cc:62:7a:c1 to access!
portManageTopoDbNotify(5585). add dev 98:97:cc:62:7a:c1
portManageTopoDbNotify(5588). self init not ready
event_sock_enable(1034). enabled netlink socket at 23 with own pid 1132
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
jsonObjectToFile(210). Trying to commit to flash...
evtPublish(405). Evt monitor publish event:29(0 bytes) to inetd failed:-1
portManageUpdateDevToMapd(2345). update dev 98:97:cc:62:7a:c1 port data
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
[mwanEnableVerify:4064] sysModeGetWorkMode: 4
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
[mwanEnableVerify:4064] sysModeGetWorkMode: 4
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
portManageLoadConfigToDevWithMode(4826). load config to dev 98:97:cc:62:7a:c1
loadIptvConfigToDev(3533). cap sub func 00
loadIptvConfigToDev(3536). cap doesn't support iptv
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
[portManageInit:6251] sysModeGetWorkMode: 4
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
sysModeTestWdsEnable(111). appsGetNetworkBackhaul 0 fail
lanv6LocalIpv6: fe80::9a97:ccff:fe62:7ac1
dnsProxyParamInit(187). priDnsStr = 223.6.6.6,223.6.6.6, sndDnsStr = 0.0.0.0,0.0.0.0
dnsProxyParamInit(187). priDnsStr = 223.6.6.6,223.6.6.6, sndDnsStr = 0.0.0.0,0.0.0.0
[lanDhcpcInit:340] sysModeGetWorkMode: 4
[dhcpsParamsUpdate:1214] sysModeGetWorkMode: 4
1
2
1
2
firewallCtxInit(550). /network/wan_status/wan_status
firewallCtxInit(550). /network/wan_status_2/wan_status_2
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_UPNP_WAN, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F INPUT_NOT_LAN_TO_WAN, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F INPUT_ICMP_TO_WAN, 256
updateChainInputIcmpToWanIf(200). enter icmp to wanif
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F INPUT_ICMP_TO_WAN_IF, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F INPUT_DHCP_V4, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_WAN_LOCAL_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_WAN_GLOBAL_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_WAN_LOCAL_IF_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_WAN_GLOBAL_IF_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_WAN_STATIC_IF_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_DHCP_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t filter -F INPUT_DHCP_STATIC_V6, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F PREROUTING_DHCP_BROAD, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F POSTROUTING_WAN_IF, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F POSTROUTING_SNAT_WAN, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F POSTROUTING_WAN_STATIC_IF, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t nat -F POSTROUTING_WAN_IF_V6, 256
iptables: No chain/target/match by that name.
<WARN> ipt cmd failed: iptables -t nat -F POSTROUTING_WAN_STATIC_IF_V6, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_DMZ, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F PREROUTING_DMZ, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_UPNP, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F PREROUTING_UPNP, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_UPNP_WAN, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F PREROUTING_VS, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_VS, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t filter -F FORWARD_DMZ, 256
ip6tables: No chain/target/match by that name.
<WARN> ipt cmd failed: ip6tables -t nat -F PREROUTING_DMZ, 256
[wanStartIndex:4265] sysModeGetWorkMode: 4
[wanPortDetectCheckAllLan:87] sysModeGetWorkMode: 4
[miniUPnPStart:682] sysModeGetWorkMode: 4
ioctl[iwpriv ra0 set SetAlmac=98:97:CC:62:7A:C1] failed Invalid argument
[wireless]ioctlCmdSetAlmac[816]Set almac 98:97:cc:62:7a:c1
ioctl[iwpriv rax0 set SetAlmac=98:97:CC:62:7A:C1] failed Invalid argument
[wireless]ioctlCmdSetAlmac[816]Set almac 98:97:cc:62:7a:c1
mesh_set_cap_info(113). set wan status 0, CAP AL MAC 00:00:00:00:00:00
netif_port_update_handle(850). all set 1905 enable
ps_app_init 1049 Path selection app init...
Init User_Flush_Fcache
rmmod: can't unload 'br_guest_mark': unknown symbol in module, or unknown parameter
rmmod: can't unload 'br_guest_filter': unknown symbol in module, or unknown parameter
registerGuestFilter.55 gateway = 00000000
[wdsSetConfig:1354] sysModeGetWorkMode: 4
[wdsSetConfig:1354] sysModeGetWorkMode: 4
[wiredExtStart:600] sysModeGetWorkMode: 4
dataModuleFlushCache(822). Trying to commit to flash...
taskBootupPending(148). TASK 1272 finished pending and continue.
taskBootupPending(148). TASK 1144 finished pending and continue.
taskBootupPending(148). TASK 1146 finished pending and continue.
taskBootupPending(148). TASK 1145 finished pending and continue.
taskBootupPending(148). TASK 2199 finished pending and continue.
taskBootupPending(148). TASK 1150 finished pending and continue.
role_switch_handle_wan_detect_event(337). detect wan status 0, self_wan_status 0, cap_wan_status 0
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra1 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra1 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra2 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra2 in topology db
ioctl[iwpriv ra0 set Channel=0] failed Invalid argument
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra1 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra2 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find ra2 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax2 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax2 in topology db
ioctl[iwpriv rax0 set Channel=0] failed Invalid argument
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax0 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax2 in topology db
station_disassociate_all_event_callback(1740). <ERROR> cannot find rax2 in topology db
fsLoadFinishCallback(132). JFFS LOAD: Exec file migration.
ctrlLoadFinishCallback(957). Exec smp.sh.
br_scan_ifaces(47). Scanning bridge netif...
topology_update_local_iface(3583). == Iface eth0.1 already exist...
topology_update_local_iface(3583). == Iface eth0.2 already exist...
topology_update_local_iface(3583). == Iface eth0.3 already exist...
topology_update_local_iface(3583). == Iface eth0.4 already exist...
topology_update_local_iface(3583). == Iface eth0.5 already exist...
topology_update_local_iface(3587). ++ Iface bond0 add to self device...
topology_update_local_iface(3587). ++ Iface ra1 add to self device...
topology_update_local_iface(3587). ++ Iface rax0 add to self device...
topology_update_local_iface(3587). ++ Iface ra0 add to self device...
topology_update_local_iface(3577). ** Iface rax1 with zero mac ignored...
topology_update_local_iface(3587). ++ Iface rax2 add to self device...
topology_update_local_iface(3587). ++ Iface apcli0 add to self device...
topology_update_local_iface(3587). ++ Iface apclix0 add to self device...
topology_update_local_iface(3587). ++ Iface ra2 add to self device...
pair_allow_ext(1061). [mapd] allow RE with almac 98:97:cc:62:7a:c1 to access!
start wss module.
Start wlan smart steer as g_wss_topology_status 0 Standalone.
_wlan_ioctl_set_bs_enable enable ra0
_wlan_ioctl_set_bs_enable enable rax0
role_selection_wlan_ready_handle(478). [role selection] no need to scan better ap for RE/unpaired device, return
lan_business_handle_wan_detect_result(1851). [lan business] Get wan status: port[-1] internet[0] state[0]
role_switch_handle_wan_detect_event(337). detect wan status 0, self_wan_status 0, cap_wan_status 0
[ 30.691922] hwrng: no data available
[ 40.931922] hwrng: no data available
starting pid 1075, tty '/dev/ttyS0': '/bin/login'
(mt7986) login: [ 51.171923] hwrng: no data available
^@[ 61.411921] hwrng: no data available
[ 71.651919] hwrng: no data available
[ 81.891920] hwrng: no data available
|
|