恩山无线论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
当贝投影
查看: 363|回复: 1

中兴ZXV10 B860v1.1破解问题

[复制链接]
发表于 2022-5-9 09:12 | 显示全部楼层 |阅读模式
出这个提示怎么办,TTL线已经连接好了



AC_ON
MIU0_DQS-OK
BIST0-▒▒▒
MIU0-1024_U
Start uboot

Relocation Offset is: 011d7000
[AT][MB][start ub][315]

U-Boot 2011.06-00132-gd30ae88-dirty (Aug 23 2019 - 19:33:20)


[MIU INFO] miu opencreate instance at 52ee9418 with private size 80 bytes at 52e                                                                                                             e9460
create instance at 52ee94b8 with private size 52 bytes at 52ee9500

uboot held at [52cddf60~54000000],size=013220a0
CPU  : Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:  832 MiB
Now running in RAM - U-Boot at: 53100000

eMMC: HS200 200MHz
eMMC 3.68 GB [75FFF8h]
In:    serial
Out:   serial
Err:   serial
Net:   zte_shutdow =false
No ethernet found.
Set MAC default
MAC:  0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize

[CPU INFO] cpu opencreate instance at 52ef99c0 with private size 44 bytes at 52e                                                                                                             f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[38]: MODULE_CPU

[AT][MBoot][Driver Init][414]
### main_loop entered: s is true

### main_loop entered: bootdelay=1


Starting logo
============= set bootargs ===============
[setup_com_controlenv] COMControlFlag=>   value[1]=, val=0
zte_mac=74:97:81:24:44:F7,ethaddr=74:97:81:24:44:F7
Hit any key to stop autoboot: 1@
step1 error...
abort=0                                                                       0
mxy: MAEKET_IS_SDLT=1,MarketCode=37, OperatorsCode=2
do_bootcheck called
MMC_CAPACITY_512 =7733240
current emmc size is =0x75fff8 (should by 512)
MMCusrdata_size =3901440

current userdata size =0x3b8800 (should by 512)
get_boot1_ver cmd_boot1=mmc read.boot 1 0x25000000 0x0 0x200000
set hdmi hdcp mode 0!
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
iTVStandard2Resolution = 2
value[29] = 240004000013334000007497812444F7
[setup_bootenv] COMControlFlag=>   value[30]=, val=0
ethaddr =74:97:81:24:44:F7
waldo msIR_GetIRKeyCode line:483 breturn false
fore uup IRKey [0xff]
waldo msIR_GetIRKeyCode line:483 breturn false
fore uup IRKey [0xff]
waldo msIR_GetIRKeyCode line:483 breturn false
fore uup IRKey [0xff]
[ztebsp] BootMode=0
[do_bootcheck,1204][ZTEWatchdog]PATCH FOR zte BEGIN
[do_bootcheck,1208][ZTEWatchdog] Watchdog_enable TRUE
[do_bootcheck,1214][ZTEWatchdog] Watchdog start, MAXTIME 120
resolution_index 2 !!!
create instance at 52ef9bb0 with private size 256 bytes at 52ef9bf8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:[MDrv_PNL_SetPanelType][613]
[_MDrv_PNL_Init_LPLL][323]pstPanelInitData->u16Width=1280, pstPanelInitData->u16                                                                                                             Height=720
[_MDrv_PNL_Init_LPLL][325]u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTot                                                                                                             al=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
[_MDrv_PNL_Init_Output_Dclk][369]pstPanelInitData->u16Width=1280, pstPanelInitDa                                                                                                             ta->u16Height=720
[_MDrv_PNL_Init_Output_Dclk][371]u16HTotal=1980,u16VTotal=750,pstPanelInitData->                                                                                                             u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
[MApi_XC_MLG_GetStatus, 1603]No instance existed, please get an instance by call                                                                                                             ing MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 52ef9d00 with private size 1720 bytes at 52ef9d48
[XC,Version]
no need to patchcreate instance at 52efa948 with private size 80 bytes at 52efa                                                                                                             990
Rx Support HDMI mode!
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready,                                                                                                              at 262
shift -8 pixels in PAL mode
Create Dolby single part name task failed!![Hal_VE_Set_PreHSD][1826] ERROR!!! HV                                                                                                             SD H input = 0, HVSD H output = 720
[Hal_VE_Set_PreVSD][2002] ERROR!!! HVSD V input = 0, HVSD V output = 576
[Hal_VE_EnableDI][2110] bEnable = 0, bIsDNR2VE = 0
lyndon Hal_VE_Set_PreVSD 1mmc change mount : tvcustomer
Size of file "/720.jpg" from mmc device 0 partition tvcustomer: 207694 bytes
Loading file "/720.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
207694 bytes read
create instance at 52efa9e8 with private size 304 bytes at 52efaa30
[AT][MB][JPD Decode][1425]

[UTOPIA INFO] close moduleNames[35]: MODULE_NJPEG_EX

create instance at 52efa9e8 with private size 132280 bytes at 52efaa30

[GOP INFO] gop opencreate instance at 52f1aef0 with private size 6908 bytes at 5                                                                                                             2f1af38
[AT][MB][Show Logo][1467]
mxy--> ir_recovery is 0
mxy: ir_recovery is 0...
## Booting kernel from Legacy Image at 25000800 ...
   Image Name:   MStar-linux
   Image Type:   ARM Linux Multi-File Image (uncompressed)
   Data Size:    5319491 Bytes = 5.1 MiB
   Load Address: 20208000
   Entry Point:  20208000
   Contents:
      Image 0: 4627784 Bytes = 4.4 MiB
      Image 1: 691695 Bytes = 675.5 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000800 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
   Loading Multi-File Image ... OK
[AT][MB][start kr][1729]

Starting kernel   ...

[PROTECT ERROR], not expected dram size: 0x0
#######################################################################
# [PROTECT WARNING], miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2196] ready init mutex

[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2197] after init mutex
RBQP_BASE = 51a04000
init: /init.clippers.rc: 458: ignored duplicate definition of service 'mdnsd'
init: /init.clippers.rc: 535: ignored duplicate definition of service 'softdetec                                                                                                             tor'
init: /zte_init.rc: 34: ignored duplicate definition of service 'IptvQosServ'
init: /zte_init.rc: 40: ignored duplicate definition of service 'xiriservice'
init: /zte_init.rc: 50: ignored duplicate definition of service 'softdetector'
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
init: read error /data/local/bootanimation.zip : lenth: 96
init: ## ProductID: strlen (32)!
healthd: No charger supplies found
init: cannot find '/system/bin/zteforad', disabling 'zteforad'
init: cannot find '/system/bin/xiriservice_ChinaMobile_SiChuan', disabling 'blue                                                                                                             toothd'
init: cannot find '/system/bin/bleservice', disabling 'bleservice'
init: cannot find '/system/bin/stratky.sh', disabling 'stratky'
init: cannot find '/system/bin/startsoftdetector.sh', disabling 'softdetector'
init: cannot find '/system/bin/amtprox', disabling 'amtprox'
init: cannot find '/system/bin/startstbagent.sh', disabling 'stbdetector'
init: cannot find '/system/bin/create_information_txt.sh', disabling 'create_txt

我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-5-10 09:48 | 显示全部楼层
如果进不去系统,可以考虑重新刷机,这个分4g与8g的版本的

我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )|网站地图

GMT+8, 2022-5-17 07:38

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表