|
|
求助！以下是dmesg
太长不能发布，剩余一半放在1楼
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.55-flippy-74+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #142 SMP PREEMPT Sat Jul 16 02:15:09 CST 2022
[ 0.000000] Machine model: Amlogic Meson GXM (S912) Q201 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000063400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37720 r8192 d31912 u77824
[ 0.000000] pcpu-alloc: s37720 r8192 d31912 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=UUID=3edfda7b-e43d-45b1-b01b-1f2f96993e8f rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=68 B:54:5D8:42
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=68B:54:5D8:42", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack ff, heap allocff, heap freeff
[ 0.000000] Memory: 1580236K/1966080K available (15104K kernel code, 2720K rwdata, 5928K rodata, 1984K init, 886K bss, 123700K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000564] Console: colour dummy device 80x25
[ 0.000972] printk: console [tty0] enabled
[ 0.001040] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001066] pid_max: default: 32768 minimum: 301
[ 0.001301] LSM: Security Framework initializing
[ 0.001389] SELinux: Initializing.
[ 0.001645] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001672] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.004277] rcu: Hierarchical SRCU implementation.
[ 0.005500] EFI services will not be available.
[ 0.006150] smp: Bringing up secondary CPUs ...
[ 0.006914] Detected VIPT I-cache on CPU1
[ 0.006983] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007725] Detected VIPT I-cache on CPU2
[ 0.007778] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.008499] Detected VIPT I-cache on CPU3
[ 0.008549] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.009271] Detected VIPT I-cache on CPU4
[ 0.009341] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.010076] Detected VIPT I-cache on CPU5
[ 0.010108] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.010777] Detected VIPT I-cache on CPU6
[ 0.010808] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.011506] Detected VIPT I-cache on CPU7
[ 0.011537] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.011631] smp: Brought up 1 node, 8 CPUs
[ 0.011765] SMP: Total of 8 processors activated.
[ 0.011777] CPU features: detected: 32-bit EL0 Support
[ 0.011787] CPU features: detected: 32-bit EL1 Support
[ 0.011800] CPU features: detected: CRC32 instructions
[ 0.012889] CPU: All CPU(s) started at EL2
[ 0.012942] alternatives: patching kernel code
[ 0.015203] devtmpfs: initialized
[ 0.023330] Registered cp15_barrier emulation handler
[ 0.023369] Registered setend emulation handler
[ 0.023539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.023572] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.030053] prandom: seed boundary self test passed
[ 0.031263] prandom: 100 self tests passed
[ 0.054212] prandom32: self test passed (less than 6 bits correlated)
[ 0.054266] pinctrl core: initialized pinctrl subsystem
[ 0.054878] DMI not present or invalid.
[ 0.055366] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.057861] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.058322] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.058580] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.058673] audit: initializing netlink subsys (disabled)
[ 0.058941] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
[ 0.060014] thermal_sys: Registered thermal governor 'step_wise'
[ 0.060403] cpuidle: using governor ladder
[ 0.060610] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.060828] ASID allocator initialised with 65536 entries
[ 0.061010] Serial: AMBA PL011 UART driver
[ 0.079863] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.084438] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.084710] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.093625] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.093653] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.093668] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.093683] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.780158] cryptd: max_cpu_qlen set to 1000
[ 1.784185] "cryptomgr_test" (118) uses obsolete ecb(arc4) skcipher
[ 1.799519] alg: No test for 842 (842-generic)
[ 1.799678] alg: No test for 842 (842-scomp)
[ 1.908033] DRBG: Continuing without Jitter RNG
[ 1.996780] raid6: neonx8 gen() 2227 MB/s
[ 2.053532] raid6: neonx8 xor() 1605 MB/s
[ 2.110303] raid6: neonx4 gen() 2217 MB/s
[ 2.167063] raid6: neonx4 xor() 1539 MB/s
[ 2.223840] raid6: neonx2 gen() 2042 MB/s
[ 2.280594] raid6: neonx2 xor() 1439 MB/s
[ 2.337362] raid6: neonx1 gen() 1664 MB/s
[ 2.394144] raid6: neonx1 xor() 1177 MB/s
[ 2.450887] raid6: int64x8 gen() 1506 MB/s
[ 2.507644] raid6: int64x8 xor() 802 MB/s
[ 2.564416] raid6: int64x4 gen() 1559 MB/s
[ 2.621168] raid6: int64x4 xor() 823 MB/s
[ 2.677942] raid6: int64x2 gen() 1388 MB/s
[ 2.734694] raid6: int64x2 xor() 739 MB/s
[ 2.791467] raid6: int64x1 gen() 1169 MB/s
[ 2.848215] raid6: int64x1 xor() 582 MB/s
[ 2.848227] raid6: using algorithm neonx8 gen() 2227 MB/s
[ 2.848239] raid6: .... xor() 1605 MB/s, rmw enabled
[ 2.848250] raid6: using neon recovery algorithm
[ 2.848468] fbcon: Taking over console
[ 2.848506] ACPI: Interpreter disabled.
[ 2.850737] iommu: Default domain type: Translated
[ 2.850767] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.851182] vgaarb: loaded
[ 2.851755] SCSI subsystem initialized
[ 2.851998] usbcore: registered new interface driver usbfs
[ 2.852059] usbcore: registered new interface driver hub
[ 2.852113] usbcore: registered new device driver usb
[ 2.852623] mc: Linux media interface: v0.10
[ 2.852657] videodev: Linux video capture interface: v2.00
[ 2.852957] EDAC MC: Ver: 3.0.0
[ 2.854047] Advanced Linux Sound Architecture Driver Initialized.
[ 2.855461] clocksource: Switched to clocksource arch_sys_counter
[ 2.855784] VFS: Disk quotas dquot_6.6.0
[ 2.855869] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.856042] FS-Cache: Loaded
[ 2.856562] pnp: PnP ACPI: disabled
[ 2.864204] NET: Registered PF_INET protocol family
[ 2.864414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.865738] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.865800] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.865880] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.866017] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.866251] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.866537] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.866636] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.866691] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.866934] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.866971] NET: Registered PF_XDP protocol family
[ 2.866994] PCI: CLS 0 bytes, default 64
[ 2.867319] Trying to unpack rootfs image as initramfs...
[ 2.880071] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.880607] kvm [1]: IPA Size Limit: 40 bits
[ 2.881700] kvm [1]: vgic interrupt IRQ9
[ 2.881961] kvm [1]: Hyp mode initialized successfully
[ 3.442922] Freeing initrd memory: 7888K
[ 3.669992] Initialise system trusted keyrings
[ 3.670259] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.677263] zbud: loaded
[ 3.679477] fuse: init (API version 7.34)
[ 3.680014] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.719253] NET: Registered PF_ALG protocol family
[ 3.779719] xor: measuring software checksum speed
[ 3.784543] 8regs : 2051 MB/sec
[ 3.787945] 32regs : 2908 MB/sec
[ 3.792537] arm64_neon : 2154 MB/sec
[ 3.792549] xor: using function: 32regs (2908 MB/sec)
[ 3.792567] Key type asymmetric registered
[ 3.792578] Asymmetric key parser 'x509' registered
[ 3.792721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.792897] io scheduler mq-deadline registered
[ 3.792912] io scheduler kyber registered
[ 3.793096] io scheduler bfq registered
[ 3.818833] soc soc0: Amlogic Meson GXM (S912) Revision 22:a (82:2) Detected
[ 3.821218] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.823342] Serial: AMBA driver
[ 3.823741] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[ 4.870895] printk: console [ttyAML0] enabled
[ 4.884831] brd: module loaded
[ 4.889390] loop: module loaded
[ 4.896490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.897413] ehci-pci: EHCI PCI platform driver
[ 4.901878] ehci-platform: EHCI generic platform driver
[ 4.907559] usbcore: registered new interface driver cdc_wdm
[ 4.912650] usbcore: registered new interface driver usb-storage
[ 4.919119] mousedev: PS/2 mouse device common for all mice
[ 4.925044] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.931332] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.935741] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.944316] i2c_dev: i2c /dev entries driver
[ 4.950336] Registered IR keymap rc-cec
[ 4.951864] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 4.960125] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0
[ 4.972286] Synopsys Designware Multimedia Card Interface Driver
[ 4.976157] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.976531] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.977400] meson-sm: secure-monitor enabled
[ 4.979114] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.979269] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.984251] hid: raw HID events driver (C) Jiri Kosina
[ 5.010015] usbcore: registered new interface driver usbhid
[ 5.015231] usbhid: USB HID core driver
[ 5.019454] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 5.032929] Initializing XFRM netlink socket
[ 5.033556] NET: Registered PF_INET6 protocol family
[ 5.034844] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 5.044095] genirq: Setting trigger mode 3 for irq 41 failed (meson_gpio_irq_set_type+0x0/0x140)
[ 5.076781] Segment Routing with IPv6
[ 5.076829] RPL Segment Routing with IPv6
[ 5.078895] In-situ OAM (IOAM) with IPv6
[ 5.082861] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.091889] bpfilter: Loaded bpfilter_umh pid 328
[ 5.093300] NET: Registered PF_PACKET protocol family
[ 5.098283] NET: Registered PF_KEY protocol family
[ 5.103188] 8021q: 802.1Q VLAN Support v1.8
[ 5.107581] registered taskstats version 1
[ 5.111178] Loading compiled-in X.509 certificates
[ 5.121190] zswap: loaded using pool zstd/zbud
[ 5.121847] Key type ._fscrypt registered
[ 5.124289] Key type .fscrypt registered
[ 5.128151] Key type fscrypt-provisioning registered
[ 5.134257] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 5.156280] mmc2: new HS200 MMC card at address 0001
[ 5.157374] mmcblk2: mmc2:0001 AJNB4R 14.6 GiB
[ 5.162801] mmcblk2boot0: mmc2:0001 AJNB4R 4.00 MiB
[ 5.166905] mmcblk2boot1: mmc2:0001 AJNB4R 4.00 MiB
[ 5.171474] mmcblk2rpmb: mmc2:0001 AJNB4R 4.00 MiB, chardev (240:0)
[ 5.172996] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 5.208851] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 5.213598] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 5.221768] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 5.229133] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 5.347231] [drm] kms: can't enable cloning when we probably wanted to.
[ 5.514206] Console: switching to colour frame buffer device 240x67
[ 5.558207] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 5.567769] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 5.571857] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 5.578132] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 5.585151] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 5.590998] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 5.596163] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 5.603579] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 5.610996] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.616171] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.623158] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.629540] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.635405] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.641184] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.652402] dwc3-meson-g12a d0078080.usb: USB2 ports: 3
[ 5.654288] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 5.665052] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 5.666971] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 5.674076] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 5.683347] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.686431] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 5.693986] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 5.703195] xhci-hcd xhci-hcd.3.auto: irq 43, io mem 0xc9000000
[ 5.709486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 5.717181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.724338] usb usb1: Product: xHCI Host Controller
[ 5.729167] usb usb1: Manufacturer: Linux 5.15.55-flippy-74+o xhci-hcd
[ 5.735636] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 5.741052] hub 1-0:1.0: USB hub found
[ 5.744217] hub 1-0:1.0: 3 ports detected
[ 5.748686] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.753766] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 5.761183] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 5.767712] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.775921] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 5.783852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.791009] usb usb2: Product: xHCI Host Controller
[ 5.795838] usb usb2: Manufacturer: Linux 5.15.55-flippy-74+o xhci-hcd
[ 5.802308] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 5.807653] hub 2-0:1.0: USB hub found
[ 5.810881] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.821163] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 5.873411] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 5.874992] ALSA device list:
[ 5.936742] No soundcards found.
[ 5.970966] Freeing unused kernel memory: 1984K
[ 5.988931] Run /init as init process
[ 5.994893] with arguments:
[ 5.994905] /init
[ 5.994912] with environment:
[ 5.994917] HOME=/
[ 5.994922] TERM=linux
[ 5.994928] cgroup_enable=memory
[ 5.994934] cgroup_memory=1
[ 5.994939] mac=68B:54:5D8:42
[ 6.002175] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 6.103347] mmc0: new high speed SDIO card at address 0001
[ 6.160309] usb 1-2: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04
[ 6.175141] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.185871] usb 1-2: Product: USB2.0 Hub
[ 6.195114] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 6.248183] hub 1-2:1.0: USB hub found
[ 6.254531] hub 1-2:1.0: 4 ports detected
[ 7.029018] usb 1-2.2: new full-speed USB device number 3 using xhci-hcd
[ 7.235074] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01
[ 7.298232] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.323915] usb 1-2.2: Product: USB Receiver
[ 7.347662] usb 1-2.2: Manufacturer: Logitech
[ 7.478719] input: Logitech USB Receiver as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C53F.0001/input/input1
[ 7.609094] hid-generic 0003:046D:C53F.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input0
[ 7.651962] input: Logitech USB Receiver Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C53F.0002/input/input2
[ 7.689908] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C53F.0002/input/input3
[ 7.769537] input: Logitech USB Receiver System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C53F.0002/input/input4
[ 7.795853] hid-generic 0003:046D:C53F.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input1
[ 7.816477] hid-generic 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input2
[ 7.934416] logitech-djreceiver 0003:046D:C53F.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input0
[ 7.968978] usb 1-2.3: new full-speed USB device number 4 using xhci-hcd
[ 8.131727] usb 1-2.3: New USB device found, idVendor=09da, idProduct=2403, bcdDevice= 1.26
[ 8.213826] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.247430] usb 1-2.3: Product: 2.4G Device
[ 8.256684] logitech-djreceiver 0003:046D:C53F.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input1
[ 8.263528] usb 1-2.3: Manufacturer: COMPANY
[ 8.346313] logitech-djreceiver 0003:046D:C53F.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.2/input2
[ 8.398944] input: COMPANY 2.4G Device as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.0/0003:09DA:2403.0004/input/input6
[ 8.440949] logitech-djreceiver 0003:046D:C53F.0003: device of type eQUAD Lightspeed 1.1 (0x0d) connected on slot 1
[ 8.470013] input: Logitech Wireless Mouse PID:4074 Keyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C53F.0003/0003:046D:4074.0005/input/input7
[ 8.505522] hid-generic 0003:09DA:2403.0004: input,hidraw3: USB HID v1.11 Keyboard [COMPANY 2.4G Device] on usb-xhci-hcd.3.auto-2.3/input0
[ 8.505974] input: Logitech Wireless Mouse PID:4074 Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C53F.0003/0003:046D:4074.0005/input/input8
[ 8.544567] hid-generic 0003:046D:4074.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4074] on usb-xhci-hcd.3.auto-2.2/input2:1
[ 8.566270] input: COMPANY 2.4G Device Mouse as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:09DA:2403.0006/input/input12
[ 8.677571] input: COMPANY 2.4G Device Keyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:09DA:2403.0006/input/input13
[ 8.741279] input: Logitech G304 as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C53F.0003/0003:046D:4074.0005/input/input15
[ 8.786817] input: COMPANY 2.4G Device as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:09DA:2403.0006/input/input14
[ 8.804150] logitech-hidpp-device 0003:046D:4074.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech G304] on usb-xhci-hcd.3.auto-2.2/input2:1
[ 8.833310] hid-generic 0003:09DA:2403.0006: input,hiddev98,hidraw5: USB HID v1.11 Mouse [COMPANY 2.4G Device] on usb-xhci-hcd.3.auto-2.3/input1
[ 9.008837] usb 1-2.4: new high-speed USB device number 5 using xhci-hcd
[ 9.201954] usb 1-2.4: New USB device found, idVendor=090c, idProduct=2000, bcdDevice=11.00
[ 9.313163] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.336565] usb 1-2.4: Product: Flash Disk
[ 9.358075] usb 1-2.4: Manufacturer: USB
[ 9.376775] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[ 9.389693] scsi host0: usb-storage 1-2.4:1.0
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2022-7-17 18:42
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
