恩山无线论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 1597|回复: 9

[AC2100(RM2100)] 求助!RM2100老毛子经常断网

[复制链接]
发表于 2022-10-29 23:31 | 显示全部楼层 |阅读模式
20恩山币
故障描述一下:我的RM2100刷了老毛子后经常用一段时间,WiFi就消失了(2.4G和5G),但是有线连接正常(无法进入后台管理),手动断电重启又可以恢复一段时间。

下面是系统日志,请求大佬帮帮忙!

Oct 21 03:00:28 syslogd started: BusyBox v1.24.2
Oct 21 03:00:28 RM2100: firmware version: 4.4.3.9-100_20220221
Oct 21 03:00:28 kernel: klogd started: BusyBox v1.24.2 (2022-02-23 16:16:18 UTC)
Oct 21 03:00:28 kernel: Linux version 4.4.198 (root@fv-az281-740) (gcc version 7.4.0 (crosstool-NG 1.24.0) ) #1 SMP Wed Feb 23 16:11:12 UTC 2022
Oct 21 03:00:28 kernel: SoC Type: MediaTek MT7621 ver:1 eco:3
Oct 21 03:00:28 kernel: bootconsole [early0] enabled
Oct 21 03:00:28 kernel: CPU0 revision is: 0001992f (MIPS 1004Kc)
Oct 21 03:00:28 kernel: MIPS: machine is Redmi RM2100
Oct 21 03:00:28 kernel: Determined physical RAM map:
Oct 21 03:00:28 kernel:  memory: 08000000 @ 00000000 (usable)
Oct 21 03:00:28 kernel: Zone ranges:
Oct 21 03:00:28 kernel:   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
Oct 21 03:00:28 kernel:   Normal   [mem 0x0000000001000000-0x0000000007ffffff]
Oct 21 03:00:28 kernel:   HighMem  empty
Oct 21 03:00:28 kernel: Movable zone start for each node
Oct 21 03:00:28 kernel: Early memory node ranges
Oct 21 03:00:28 kernel:   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Oct 21 03:00:28 kernel: Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Oct 21 03:00:28 kernel: On node 0 totalpages: 32768
Oct 21 03:00:28 kernel: free_area_init_node: node 0, pgdat 815337a0, node_mem_map 815ce000
Oct 21 03:00:28 kernel:   DMA zone: 32 pages used for memmap
Oct 21 03:00:28 kernel:   DMA zone: 0 pages reserved
Oct 21 03:00:28 kernel:   DMA zone: 4096 pages, LIFO batch:0
Oct 21 03:00:28 kernel:   Normal zone: 224 pages used for memmap
Oct 21 03:00:28 kernel:   Normal zone: 28672 pages, LIFO batch:7
Oct 21 03:00:28 kernel: VPE topology {2,2} total 4
Oct 21 03:00:28 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Oct 21 03:00:28 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: PERCPU: Embedded 10 pages/cpu @816dc000 s9264 r8192 d23504 u40960
Oct 21 03:00:28 kernel: pcpu-alloc: s9264 r8192 d23504 u40960 alloc=10*4096
Oct 21 03:00:28 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Oct 21 03:00:28 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Oct 21 03:00:28 kernel: Kernel command line: console=ttyS0,115200 debug rootfstype=squashfs
Oct 21 03:00:28 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Oct 21 03:00:28 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 21 03:00:28 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct 21 03:00:28 kernel: Writing ErrCtl register=000520cc
Oct 21 03:00:28 kernel: Readback ErrCtl register=000520cc
Oct 21 03:00:28 kernel: Memory: 123760K/131072K available (4277K kernel code, 182K rwdata, 956K rodata, 268K init, 243K bss, 7312K reserved, 0K cma-reserved, 0K highmem)
Oct 21 03:00:28 kernel: SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 21 03:00:28 kernel: Hierarchical RCU implementation.
Oct 21 03:00:28 kernel: NR_IRQS:256
Oct 21 03:00:28 kernel: CPU Clock: 880MHz
Oct 21 03:00:28 kernel: clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Oct 21 03:00:28 kernel: clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Oct 21 03:00:28 kernel: sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Oct 21 03:00:28 kernel: Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Oct 21 03:00:28 kernel: pid_max: default: 32768 minimum: 301
Oct 21 03:00:28 kernel: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 21 03:00:28 kernel: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 21 03:00:28 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Oct 21 03:00:28 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: CPU1 revision is: 0001992f (MIPS 1004Kc)
Oct 21 03:00:28 kernel: Synchronize counters for CPU 1: done.
Oct 21 03:00:28 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Oct 21 03:00:28 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: CPU2 revision is: 0001992f (MIPS 1004Kc)
Oct 21 03:00:28 kernel: Synchronize counters for CPU 2: done.
Oct 21 03:00:28 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Oct 21 03:00:28 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Oct 21 03:00:28 kernel: CPU3 revision is: 0001992f (MIPS 1004Kc)
Oct 21 03:00:28 kernel: Synchronize counters for CPU 3: done.
Oct 21 03:00:28 kernel: Brought up 4 CPUs
Oct 21 03:00:28 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Oct 21 03:00:28 kernel: futex hash table entries: 1024 (order: 3, 32768 bytes)
Oct 21 03:00:28 kernel: pinctrl core: initialized pinctrl subsystem
Oct 21 03:00:28 kernel: NET: Registered protocol family 16
Oct 21 03:00:28 kernel: FPU Affinity set after 11720 emulations
Oct 21 03:00:28 kernel: mt7621_gpio 1e000600.gpio: registering 32 gpios
Oct 21 03:00:28 kernel: mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe1
Oct 21 03:00:28 kernel: mt7621-pci 1e140000.pcie: Failed to get gpio for PCIe2
Oct 21 03:00:28 kernel: PCIe port 2 link down
Oct 21 03:00:28 kernel: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
Oct 21 03:00:28 kernel: PCI host bridge to bus 0000:00
Oct 21 03:00:28 kernel: pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Oct 21 03:00:28 kernel: pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
Oct 21 03:00:28 kernel: pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Oct 21 03:00:28 kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Oct 21 03:00:28 kernel: pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Oct 21 03:00:28 kernel: pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Oct 21 03:00:28 kernel: pci 0000:00:00.0: supports D1
Oct 21 03:00:28 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Oct 21 03:00:28 kernel: pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Oct 21 03:00:28 kernel: pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Oct 21 03:00:28 kernel: pci 0000:00:01.0: supports D1
Oct 21 03:00:28 kernel: pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Oct 21 03:00:28 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Oct 21 03:00:28 kernel: pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Oct 21 03:00:28 kernel: pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
Oct 21 03:00:28 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Oct 21 03:00:28 kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Oct 21 03:00:28 kernel: pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
Oct 21 03:00:28 kernel: pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Oct 21 03:00:28 kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Oct 21 03:00:28 kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Oct 21 03:00:28 kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
Oct 21 03:00:28 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Oct 21 03:00:28 kernel: pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
Oct 21 03:00:28 kernel: pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
Oct 21 03:00:28 kernel: pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
Oct 21 03:00:28 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
Oct 21 03:00:28 kernel: pci 0000:00:00.0: PCI bridge to [bus 01]
Oct 21 03:00:28 kernel: pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Oct 21 03:00:28 kernel: pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff]
Oct 21 03:00:28 kernel: pci 0000:00:01.0: PCI bridge to [bus 02]
Oct 21 03:00:28 kernel: pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
Oct 21 03:00:28 kernel: clocksource: Switched to clocksource GIC
Oct 21 03:00:28 kernel: NET: Registered protocol family 2
Oct 21 03:00:28 kernel: TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Oct 21 03:00:28 kernel: TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
Oct 21 03:00:28 kernel: TCP: Hash tables configured (established 1024 bind 1024)
Oct 21 03:00:28 kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Oct 21 03:00:28 kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Oct 21 03:00:28 kernel: NET: Registered protocol family 1
Oct 21 03:00:28 kernel: PCI: CLS 80 bytes, default 32
Oct 21 03:00:28 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Oct 21 03:00:28 kernel: io scheduler noop registered
Oct 21 03:00:28 kernel: io scheduler deadline registered (default)
Oct 21 03:00:28 kernel: Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
Oct 21 03:00:28 kernel: console [ttyS0] disabled
Oct 21 03:00:28 kernel: 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
Oct 21 03:00:28 kernel: console [ttyS0] enabled
Oct 21 03:00:28 kernel: bootconsole [early0] disabled
Oct 21 03:00:28 kernel: tun: Universal TUN/TAP device driver, 1.6
Oct 21 03:00:28 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 21 03:00:28 kernel: CHIP_ID = MT7621
Oct 21 03:00:28 kernel: GMAC1 support rgmii
Oct 21 03:00:28 kernel: GE1_RGMII_FORCE_1000
Oct 21 03:00:28 kernel: GMAC2 support rgmii
Oct 21 03:00:28 kernel: GE2_RGMII_FORCE_1000
Oct 21 03:00:28 kernel: STD_v0.1  1024 rx/2048 tx descriptors allocated, mtu = 1500!
Oct 21 03:00:28 kernel: MT7530 Reset Completed!!
Oct 21 03:00:28 kernel: change HW-TRAP to 0x17c8f
Oct 21 03:00:28 kernel: eth3: ===> virtualif_open
Oct 21 03:00:28 kernel: PPP generic driver version 2.4.2
Oct 21 03:00:28 kernel: PPP MPPE Compression module registered
Oct 21 03:00:28 kernel: NET: Registered protocol family 24
Oct 21 03:00:28 kernel: PPTP driver version 0.8.5
Oct 21 03:00:28 kernel: mt7621_wdt 1e000100.wdt: Initialized
Oct 21 03:00:28 kernel: LED trigger nand-disk failed to register (-17)
Oct 21 03:00:28 kernel: Netfilter messages via NETLINK v0.30.
Oct 21 03:00:28 kernel: nfnl_acct: registering with nfnetlink.
Oct 21 03:00:28 kernel: nf_conntrack version 0.5.0 (1933 buckets, 7732 max)
Oct 21 03:00:28 kernel: xt_time: kernel timezone is -0000
Oct 21 03:00:28 kernel: gre: GRE over IPv4 demultiplexor driver
Oct 21 03:00:28 kernel: ip_gre: GRE over IPv4 tunneling driver
Oct 21 03:00:28 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 21 03:00:28 kernel: NET: Registered protocol family 10
Oct 21 03:00:28 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Oct 21 03:00:28 kernel: sit: IPv6 over IPv4 tunneling driver
Oct 21 03:00:28 kernel: NET: Registered protocol family 17
Oct 21 03:00:28 kernel: bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Oct 21 03:00:28 kernel: l2tp_core: L2TP core driver, V2.0
Oct 21 03:00:28 kernel: l2tp_ppp: PPPoL2TP kernel driver, V2.0
Oct 21 03:00:28 kernel: l2tp_netlink: L2TP netlink interface
Oct 21 03:00:28 kernel: 8021q: 802.1Q VLAN Support v1.8
Oct 21 03:00:28 kernel: mtkmips-pinmux pinctrl: spi is already enabled
Oct 21 03:00:28 kernel: mtk-nand 1e003000.nand: Error applying setting, reverse things back
Oct 21 03:00:28 kernel: nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
Oct 21 03:00:28 kernel: nand: GD/ESMT PSU1GA30DT
Oct 21 03:00:28 kernel: nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Oct 21 03:00:28 kernel: Scanning device for bad blocks
Oct 21 03:00:28 kernel: 10 ofpart partitions found on MTD device mtk-nand
Oct 21 03:00:28 kernel: Creating 10 MTD partitions on "mtk-nand":
Oct 21 03:00:28 kernel: 0x000000000000-0x000000080000 : "Bootloader"
Oct 21 03:00:28 kernel: 0x000000080000-0x000000100000 : "CFG_Bdata"
Oct 21 03:00:28 kernel: 0x000000100000-0x000000180000 : "Factory"
Oct 21 03:00:28 kernel: 0x000000180000-0x000000200000 : "Crash"
Oct 21 03:00:28 kernel: 0x000000200000-0x000000600000 : "kernel_stock"
Oct 21 03:00:28 kernel: 0x000000600000-0x000001a00000 : "firmware"
Oct 21 03:00:28 kernel: mtd_check_rootfs_magic: magic: 0x73717368, offset 0x1e0000
Oct 21 03:00:28 kernel: 2 uimage-fw partitions found on MTD device firmware
Oct 21 03:00:28 kernel: 0x000000600000-0x0000007e0000 : "kernel"
Oct 21 03:00:28 kernel: 0x0000007e0000-0x000001a00000 : "rootfs"
Oct 21 03:00:28 kernel: mtd: device 7 (rootfs) set to be root filesystem
Oct 21 03:00:28 kernel: 0x000001a00000-0x000001a80000 : "Config"
Oct 21 03:00:28 kernel: 0x000001a80000-0x000001e80000 : "Storage"
Oct 21 03:00:28 kernel: 0x000001e80000-0x000007f80000 : "RWFS"
Oct 21 03:00:28 kernel: 0x000000000000-0x000007f80000 : "ALL"
Oct 21 03:00:28 kernel: ASUS NVRAM, v0.08. Available space: 131072. Integrity: OK
Oct 21 03:00:28 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
Oct 21 03:00:28 kernel: Freeing unused kernel memory: 268K
Oct 21 03:00:28 kernel: This architecture does not have kernel memory protection.
Oct 21 03:00:28 kernel: register mt_drv
Oct 21 03:00:28 kernel: == pAd = c0681000, size = 3001184, Status=0 ==
Oct 21 03:00:28 kernel: pAd->ciHif.CSRBaseAddress =0xc0580000, csr_addr=0xc0580000!
Oct 21 03:00:28 kernel: RTMPInitPCIeDevice():device_id=0x7615
Oct 21 03:00:28 kernel: mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
Oct 21 03:00:28 kernel: mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
Oct 21 03:00:28 kernel: AP Driver version-5.0.4.0
Oct 21 03:00:28 kernel: RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0
Oct 21 03:00:28 kernel: mt7615_init()-->
Oct 21 03:00:28 kernel: Use 1st iPAiLNA default bin.
Oct 21 03:00:28 kernel: Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin.
Oct 21 03:00:28 kernel: <--mt7615_init()
Oct 21 03:00:28 kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Oct 21 03:00:28 kernel: register rlt_drv
Oct 21 03:00:28 kernel: === pAd = c0c01000, size = 1115176 ===
Oct 21 03:00:28 kernel: <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
Oct 21 03:00:28 kernel: <-- RTMPAllocAdapterBlock, Status=0
Oct 21 03:00:28 kernel: pAd->CSRBaseAddress =0xc0b00000, csr_addr=0xc0b00000!
Oct 21 03:00:28 kernel: device_id =0x7603
Oct 21 03:00:28 kernel: MT7603 AP Driver version 4.1.2.0_20190222
Oct 21 03:00:28 kernel: mt7603_init()-->
Oct 21 03:00:28 kernel: mt_bcn_buf_init(224): Not support for HIF_MT yet!
Oct 21 03:00:28 kernel: <--mt7603_init()
Oct 21 03:00:28 kernel: load_dev_l1profile()-->
Oct 21 03:00:28 kernel: match_index_by_chipname() MT7603 found as INDEX0
Oct 21 03:00:28 kernel: l1set_profile_path() profile remain /etc/Wireless/RT2860/RT2860AP.dat
Oct 21 03:00:28 kernel: l1set_eeprom_offset() eeprom offset remain 0x0
Oct 21 03:00:28 kernel: l1set_eeprom_size() eeprom size update from 0x200 to 0x400
Oct 21 03:00:28 kernel: l1set_ifname() ifname rename from ra0 to ra
Oct 21 03:00:28 kernel: l1set_ifname() ifname remain ra
Oct 21 03:00:28 kernel: l1set_ifname() ifname remain wds
Oct 21 03:00:28 kernel: l1set_ifname() ifname remain apcli
Oct 21 03:00:28 kernel: ip_set: loading out-of-tree module taints kernel.
Oct 21 03:00:28 kernel: Raeth STD_v0.1 (
Oct 21 03:00:28 kernel: Tasklet<6>)
Oct 21 03:00:28 kernel: mtk_esw - hw bridge: LLLLL
Oct 21 03:00:28 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
Oct 21 03:00:28 RM2100: wif_control: ifname: rai0, isup: 1
Oct 21 03:00:28 kernel: device eth2 entered promiscuous mode
Oct 21 03:00:28 kernel: rai0: ===> main_virtual_if_open
Oct 21 03:00:28 kernel: MT7615 mismatch with MT7603 as INDEX0
Oct 21 03:00:28 kernel: MT7615 found as INDEX1
Oct 21 03:00:28 kernel: [1]MT7615 found by chip
Oct 21 03:00:28 kernel: load l1profile succeed!
Oct 21 03:00:28 kernel: driver_own()::Try to Clear FW Own...
Oct 21 03:00:28 kernel: driver_own()::Success to clear FW Own
Oct 21 03:00:28 kernel: multi_profile_check: DEFAULT_5G_PROFILE is disable, buf1 is 2G profile, buf2 is 5G profile
Oct 21 03:00:28 kernel: multi_profile_check: buf1: /etc/Wireless/iNIC/iNIC_ap.dat
Oct 21 03:00:28 kernel: multi_profile_check: buf2: /etc/Wireless/iNIC/iNIC_ap_5G.dat
Oct 21 03:00:28 kernel: RtmpOSFileOpen(): Error 2 opening /etc/Wireless/iNIC/iNIC_ap_5G.dat
Oct 21 03:00:28 kernel: Open file "/etc/Wireless/iNIC/iNIC_ap_5G.dat" failed!
Oct 21 03:00:28 kernel: E2pAccessMode=2
Oct 21 03:00:28 kernel: SSID[0]=17-5G, EdcaIdx=0
Oct 21 03:00:28 kernel: SSID[1]=RM2100_GUEST_5G_051E, EdcaIdx=0
Oct 21 03:00:28 kernel: BSS0 PhyMode=49
Oct 21 03:00:28 kernel: wmode_band_equal(): Band Equal!
Oct 21 03:00:28 kernel: BandSteering=0
Oct 21 03:00:28 kernel: [TxPower] BAND0: 100
Oct 21 03:00:28 kernel: [PowerUpenable] BAND0: 0
Oct 21 03:00:28 kernel: [BFBACKOFFenable] BAND0: 0
Oct 21 03:00:28 kernel: CalCacheApply = 0
Oct 21 03:00:28 kernel: FragThreshold[0]=2346
Oct 21 03:00:28 kernel: I/F(ra0) NoForwardingMBCast=0
Oct 21 03:00:28 kernel: I/F(ra1) NoForwardingMBCast=1
Oct 21 03:00:28 kernel: read_etxbf: ETxBfEnCond = 0
Oct 21 03:00:28 kernel: read_etxbf: BSSID[0]
Oct 21 03:00:28 kernel: read_etxbf: MBSS[0] ETxBfEnCond = 0
Oct 21 03:00:28 kernel: read_etxbf: More BSSID[1]
Oct 21 03:00:28 kernel: read_etxbf: More MBSS[1] ETxBfEnCond = 0
Oct 21 03:00:28 kernel: ApCliAPSDCapable[0]=0
Oct 21 03:00:28 kernel: HT: WDEV[0] Ext Channel = ABOVE
Oct 21 03:00:28 kernel: RTMPSetProfileParameters: Mcast frame, i=0,  Mode=2!
Oct 21 03:00:28 kernel: RTMPSetProfileParameters: Mcast frame, i=0,  MCS=0!
Oct 21 03:00:28 kernel: WtcSetMaxStaNum: BssidNum:2, MaxStaNum:124 (WdsNum:0, ApcliNum:1, MaxNumChipRept:32), MinMcastWcid:125
Oct 21 03:00:28 kernel: Top Init Done!
Oct 21 03:00:28 kernel: Use dev_alloc_skb
Oct 21 03:00:28 kernel: RX[0] DESC a0cfc000 size = 16384
Oct 21 03:00:28 kernel: RX[1] DESC a0cfa000 size = 8192
Oct 21 03:00:28 kernel: cut_through_init(): ct sw token number = 4095
Oct 21 03:00:28 kernel: cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
Oct 21 03:00:28 kernel: cut_through_token_list_init(): 85d70808,85d70808
Oct 21 03:00:28 kernel: cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
Oct 21 03:00:28 kernel: cut_through_token_list_init(): 85d70818,85d70818
Oct 21 03:00:28 kernel: Hif Init Done!
Oct 21 03:00:28 kernel: ctl->txq = c09583d0
Oct 21 03:00:28 kernel: ctl->rxq = c09583dc
Oct 21 03:00:28 kernel: ctl->ackq = c09583e8
Oct 21 03:00:28 kernel: ctl->kickq = c09583f4
Oct 21 03:00:28 kernel: ctl->tx_doneq = c0958400
Oct 21 03:00:28 kernel: ctl->rx_doneq = c095840c
Oct 21 03:00:28 kernel: Parsing patch header
Oct 21 03:00:28 kernel:         Built date: 20180518100604a
Oct 21 03:00:28 kernel:         Platform: ALPS
Oct 21 03:00:28 kernel:         HW/SW version: 0x8a108a10
Oct 21 03:00:28 kernel:         Patch version: 0x00000010
Oct 21 03:00:28 kernel:         Target address: 0x80000, length: 11072
Oct 21 03:00:28 kernel: patch is not ready && get semaphore success
Oct 21 03:00:28 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:28 kernel: MtCmdPatchFinishReq
Oct 21 03:00:28 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:28 kernel: release patch semaphore
Oct 21 03:00:28 kernel: Parsing CPU 0 fw tailer
Oct 21 03:00:28 kernel:         Chip ID: 0x04
Oct 21 03:00:28 kernel:         Eco version: 0x00
Oct 21 03:00:28 kernel:         Region number: 0x00
Oct 21 03:00:28 kernel:         Format version: 0x00
Oct 21 03:00:28 kernel:         Ram version: _reserved_
Oct 21 03:00:28 kernel:         Built date: 20190307015603<4>        Feature set: 0x01
Oct 21 03:00:28 kernel:         Target address: 0x209c400, Download size: 43328
Oct 21 03:00:28 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:28 kernel: MtCmdFwStartReq: override = 0x1, address = 0x84000
Oct 21 03:00:28 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:28 kernel: Parsing CPU 1 fw tailer
Oct 21 03:00:28 kernel:         Chip ID: 0x04
Oct 21 03:00:28 kernel:         Eco version: 0x00
Oct 21 03:00:28 kernel:         Region number: 0x00
Oct 21 03:00:28 kernel:         Format version: 0x00
Oct 21 03:00:28 kernel:         Ram version: _reserved_
Oct 21 03:00:28 kernel:         Built date: 20190415154149<4>        Feature set: 0x01
Oct 21 03:00:28 kernel:         Target address: 0x90000000, Download size: 122608
Oct 21 03:00:28 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:29 kernel: MtCmdFwStartReq: override = 0x4, address = 0x0
Oct 21 03:00:29 kernel: EventGenericEventHandler: CMD Success
Oct 21 03:00:29 kernel: MCU Init Done!
Oct 21 03:00:29 kernel: efuse_probe: efuse = 10000212
Oct 21 03:00:29 kernel: RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
Oct 21 03:00:29 kernel: RtmpEepromGetDefault::e2p_dafault=1
Oct 21 03:00:29 kernel: RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
Oct 21 03:00:29 kernel: NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000]
Oct 21 03:00:29 kernel: ^[[34mNICReadEEPROMParameters: EEPROM 0x52 b300^[[m
Oct 21 03:00:36 kernel: Country Region from e2p = 101
Oct 21 03:00:36 kernel: mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
Oct 21 03:00:36 kernel: RcRadioInit(): DbdcMode=0, ConcurrentBand=1
Oct 21 03:00:36 kernel: RcRadioInit(): pRadioCtrl=87d2aaa0,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
Oct 21 03:00:36 kernel: MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
Oct 21 03:00:36 kernel: MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
Oct 21 03:00:36 kernel: EEPROM Init Done!
Oct 21 03:00:36 kernel: mt_mac_init()-->
Oct 21 03:00:36 kernel: mt7615_init_mac_cr()-->
Oct 21 03:00:36 kernel: mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
Oct 21 03:00:36 kernel: <--mt_mac_init()
Oct 21 03:00:36 kernel: CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
Oct 21 03:00:36 kernel: MAC Init Done!
Oct 21 03:00:36 kernel: MT7615BBPInit():BBP Initialization.....
Oct 21 03:00:36 kernel:         Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
Oct 21 03:00:36 kernel:         Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
Oct 21 03:00:36 kernel: MT7615BBPInit() todo
Oct 21 03:00:36 kernel: PHY Init Done!
Oct 21 03:00:36 kernel: MtCmdSetMacTxRxret = 0)
Oct 21 03:00:36 kernel: WifiFwdSet::disabled=0
Oct 21 03:00:36 kernel: ap_ftkd> Initialize FT KDP Module...
Oct 21 03:00:36 kernel: Main bssid = 00:00:00:00:00:00
Oct 21 03:00:36 kernel: MtCmdSetMacTxRxret = 0)
Oct 21 03:00:36 kernel: <==== mt_wifi_init, Status=0
Oct 21 03:00:36 kernel: TxBfModuleEnCtrl:It's not DBDC mode
Oct 21 03:00:36 kernel: MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
Oct 21 03:00:36 kernel: WtcSetMaxStaNum: BssidNum:2, MaxStaNum:124 (WdsNum:0, ApcliNum:1, MaxNumChipRept:32), MinMcastWcid:125
Oct 21 03:00:36 kernel: RedInit: set CR4/N9 RED Enable to 1.
Oct 21 03:00:36 kernel: RedInit: RED Initiailize Done.
Oct 21 03:00:36 kernel: cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
Oct 21 03:00:36 kernel: RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
Oct 21 03:00:36 kernel: wifi_sys_open(), wdev idx = 0
Oct 21 03:00:36 kernel: wdev_attr_update(): wdevId0 = 9c:9d:7e:51:05:21
Oct 21 03:00:36 kernel: [RcGetHdevByPhyMode]-- channel 0 fix for rdev fetching
Oct 21 03:00:36 kernel: ^[[1;33m [RadarStateCheck] RD_NORMAL_MODE ^[[m
Oct 21 03:00:36 kernel: phy_freq_adjust : no prim_ch value for adjust!
Oct 21 03:00:36 kernel: Caller: wlan_operate_init+0xec/0x100 [mt_7615e]
Oct 21 03:00:36 kernel: phy_mode=49, ch=0, wdev_type=1
Oct 21 03:00:36 kernel: ht_cap->HtCapInfo: ldpc=0,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
Oct 21 03:00:36 kernel: ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
Oct 21 03:00:36 kernel: AP inf up for ra_0(func_idx) OmacIdx=0
Oct 21 03:00:36 kernel: AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
Oct 21 03:00:36 kernel: ApAutoChannelAtBootUp----------------->
Oct 21 03:00:36 kernel: ApAutoChannelAtBootUp: AutoChannelBootup = 1, pAd: c0681000, ifname: rai0, channel: 0
Oct 21 03:00:36 kernel: MtCmdSetMacTxRxret = 0)
Oct 21 03:00:36 kernel: [AutoChSelBuildChannelListFor5G] ChListNum5G = 13
Oct 21 03:00:36 kernel: MTAPAutoSelectChannel: IsABand = 1, ChannelListNum = 0
Oct 21 03:00:36 kernel: ====================================================================
Oct 21 03:00:36 kernel: RandomByte2(4758): Not support for HIF_MT yet!
Oct 21 03:00:36 kernel: [SelectClearChannelBusyTime] - band0 END
Oct 21 03:00:36 kernel: ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 0, IsAband = 1
Oct 21 03:00:36 kernel: ^[[41m AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 49, Channel = 0 ^[[m
Oct 21 03:00:36 kernel: phy_freq_adjust : no prim_ch value for adjust!
Oct 21 03:00:36 kernel: ApAutoChannelAtBootUp<-----------------
Oct 21 03:00:36 kernel: [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
Oct 21 03:00:36 kernel: RTMPSetPhyMode(): channel out of range, use first ch=36
Oct 21 03:00:39 kernel: wifi_sys_linkup(), wdev idx = 0
Oct 21 03:00:39 kernel: wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
Oct 21 03:00:39 kernel:  LinkToOmacIdx = 0, LinkToWdevType = 1
Oct 21 03:00:39 kernel: bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8192
Oct 21 03:00:39 kernel: UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
Oct 21 03:00:39 kernel: APStartUpForMbss: BssIndex = 0 channel = 36
Oct 21 03:00:39 kernel: MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
Oct 21 03:00:39 kernel: device rai0 entered promiscuous mode
Oct 21 03:00:39 RM2100: wif_control: ifname: ra0, isup: 1
Oct 21 03:00:39 kernel: load_dev_l1profile()-->
Oct 21 03:00:39 kernel: l1set_profile_path() profile remain /etc/Wireless/RT2860/RT2860AP.dat
Oct 21 03:00:39 kernel: l1set_eeprom_offset() eeprom offset remain 0x0
Oct 21 03:00:39 kernel: l1set_eeprom_size() eeprom size remain 0x400
Oct 21 03:00:39 kernel: l1set_ifname() ifname rename from ra0 to ra
Oct 21 03:00:39 kernel: l1set_ifname() ifname remain ra
Oct 21 03:00:39 kernel: l1set_ifname() ifname remain wds
Oct 21 03:00:39 kernel: l1set_ifname() ifname remain apcli
Oct 21 03:00:39 kernel: TX_BCN DESC a0d64000 size = 320
Oct 21 03:00:39 kernel: RX[0] DESC a0d66000 size = 2048
Oct 21 03:00:39 kernel: RX[1] DESC a0d67000 size = 2048
Oct 21 03:00:39 kernel: E2pAccessMode=2
Oct 21 03:00:39 kernel: cfg_mode=7
Oct 21 03:00:39 kernel: wmode_band_equal(): Band Equal!
Oct 21 03:00:39 kernel: Key1Str is Invalid key length(0) or Type(0)
Oct 21 03:00:39 kernel: Key2Str is Invalid key length(0) or Type(0)
Oct 21 03:00:39 kernel: Key3Str is Invalid key length(0) or Type(0)
Oct 21 03:00:39 kernel: Key4Str is Invalid key length(0) or Type(0)
Oct 21 03:00:40 kernel: FW Version:CL173766_R
Oct 21 03:00:40 kernel: FW Build Date:20171110105932<4>CmdStartDLRsp: WiFI FW Download Success
Oct 21 03:00:40 kernel: AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
Oct 21 03:00:40 kernel: efuse_probe: efuse = 10000002
Oct 21 03:00:40 kernel: RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
Oct 21 03:00:40 kernel: RtmpEepromGetDefault::e2p_dafault=1
Oct 21 03:00:40 kernel: RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
Oct 21 03:00:40 kernel: NVM is FLASH mode, flash_offset = 0x0
Oct 21 03:00:40 kernel: 1. Phy Mode = 12
Oct 21 03:00:40 kernel: @@@  NICReadEEPROMParameters : pAd->FWLoad=0
Oct 21 03:00:40 kernel: Country Region from e2p = ffff
Oct 21 03:00:40 kernel: tssi_1_target_pwr_g_band = 26
Oct 21 03:00:40 kernel: 2. Phy Mode = 12
Oct 21 03:00:40 kernel: 3. Phy Mode = 12
Oct 21 03:00:40 kernel: NICInitPwrPinCfg(14): Not support for HIF_MT yet!
Oct 21 03:00:40 kernel: NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet!
Oct 21 03:00:40 kernel: mt_mac_init()-->
Oct 21 03:00:40 kernel: mt7603_init_mac_cr()-->
Oct 21 03:00:40 kernel: AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024!
Oct 21 03:00:40 kernel: <--mt_mac_init()
Oct 21 03:00:40 kernel:         WTBL Segment 1 info:
Oct 21 03:00:40 kernel:                 MemBaseAddr/FID:0x28000/0
Oct 21 03:00:40 kernel:                 EntrySize/Cnt:32/128
Oct 21 03:00:40 kernel:         WTBL Segment 2 info:
Oct 21 03:00:40 kernel:                 MemBaseAddr/FID:0x40000/0
Oct 21 03:00:40 kernel:                 EntrySize/Cnt:64/128
Oct 21 03:00:40 kernel:         WTBL Segment 3 info:
Oct 21 03:00:40 kernel:                 MemBaseAddr/FID:0x42000/64
Oct 21 03:00:40 kernel:                 EntrySize/Cnt:64/128
Oct 21 03:00:40 kernel:         WTBL Segment 4 info:
Oct 21 03:00:40 kernel:                 MemBaseAddr/FID:0x44000/128
Oct 21 03:00:40 kernel:                 EntrySize/Cnt:32/128
Oct 21 03:00:40 kernel: AntCfgInit(2689): Not support for HIF_MT yet!
Oct 21 03:00:40 kernel: RTMPSetPhyMode(): channel out of range, use first ch=0
Oct 21 03:00:40 kernel: MCS Set = ff ff 00 00 01
Oct 21 03:00:48 kernel: =====================================================
Oct 21 03:00:48 kernel: Channel 1 : Dirty = 436, False CCA = 0, Busy Time = 7462, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 2 : Dirty = 268, False CCA = 0, Busy Time = 7149, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 3 : Dirty = 362, False CCA = 0, Busy Time = 3687, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 4 : Dirty = 268, False CCA = 0, Busy Time = 3019, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 5 : Dirty = 286, False CCA = 0, Busy Time = 4470, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 6 : Dirty = 182, False CCA = 0, Busy Time = 7408, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 7 : Dirty = 230, False CCA = 0, Busy Time = 3610, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 8 : Dirty = 176, False CCA = 0, Busy Time = 1945, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 9 : Dirty = 220, False CCA = 0, Busy Time = 2225, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 10 : Dirty = 216, False CCA = 0, Busy Time = 403, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 11 : Dirty = 318, False CCA = 0, Busy Time = 7556, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 12 : Dirty = 230, False CCA = 0, Busy Time = 3505, Skip Channel = FALSE
Oct 21 03:00:48 kernel: Channel 13 : Dirty = 256, False CCA = 0, Busy Time = 3340, Skip Channel = FALSE
Oct 21 03:00:48 kernel: =====================================================
Oct 21 03:00:48 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 10
Oct 21 03:00:48 kernel: Min Dirty = 398
Oct 21 03:00:48 kernel: ExChannel = 6 , 0
Oct 21 03:00:48 kernel: BW        = 40
Oct 21 03:00:49 kernel: AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet!
Oct 21 03:00:49 kernel: RTMPSetPiggyBack(943): Not support for HIF_MT yet!
Oct 21 03:00:49 kernel: AsicSetTxPreamble(4312): Not support for HIF_MT yet!
Oct 21 03:00:49 kernel: AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
Oct 21 03:00:49 kernel: Main bssid = 9c:9d:7e:51:05:20
Oct 21 03:00:49 kernel: <==== rt28xx_init, Status=0
Oct 21 03:00:49 kernel: @@@ ed_monitor_exit : ===>
Oct 21 03:00:49 kernel: @@@ ed_monitor_exit : <===
Oct 21 03:00:49 kernel: mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0x8564267c, EDCCA_Status=0
Oct 21 03:00:49 kernel: WiFi Startup Cost (ra0): 9.530s
Oct 21 03:00:49 kernel: device ra0 entered promiscuous mode
Oct 21 03:00:50 kernel: br0: port 3(ra0) entered forwarding state
Oct 21 03:00:50 kernel: br0: port 2(rai0) entered forwarding state
Oct 21 03:00:50 kernel: br0: port 1(eth2) entered forwarding state
Oct 21 03:00:50 kernel: random: sed: uninitialized urandom read (6 bytes read, 110 bits of entropy available)
Oct 21 03:00:50 httpd[602]: Server listening port 80 (HTTP).
Oct 21 03:00:52 kernel: br0: port 3(ra0) entered forwarding state
Oct 21 03:00:52 kernel: br0: port 1(eth2) entered forwarding state
Oct 21 03:00:52 kernel: br0: port 2(rai0) entered forwarding state
Oct 21 03:00:55 kernel: random: nonblocking pool is initialized
Oct 21 03:00:55 sshd[608]: Server listening on :: port 22.
Oct 21 03:00:55 sshd[608]: Server listening on 0.0.0.0 port 22.
Oct 21 03:00:55 gpio_btn: service started.
Oct 21 03:00:55 iappd[636]: iapp> IfName[0]: rai0
Oct 21 03:00:55 kernel: started_script. (648): drop_caches: 3
Oct 21 03:00:55 自动启动: 正在检查路由是否已连接互联网!
Oct 21 03:01:00 NTP Client: Synchronizing time to ntp1.aliyun.com.
Oct 21 03:01:30 NTP Client: Synchronizing time to time1.cloud.tencent.com.
Oct 21 03:01:44 kernel: pSsid=17-5G1^P
Oct 21 03:01:44 kernel: RRM_EnqueueNeighborRep() : send Neighbor RSP
Oct 21 03:02:00 NTP Client: Synchronizing time to ntp1.aliyun.com.
Oct 29 22:56:29 NTP Client: System time changed, offset: 762867.137647s
Oct 29 22:59:48 kernel: pSsid=17-5G1^P
Oct 29 22:59:48 kernel: RRM_EnqueueNeighborRep() : send Neighbor RSP
Oct 29 23:00:32 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:01:09 kernel: pSsid=17-5G^Q^A
Oct 29 23:01:09 kernel: RRM_EnqueueNeighborRep() : send Neighbor RSP
Oct 29 23:03:12 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:03:44 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:12:08 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:13:12 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:13:28 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:16:19 kernel: pSsid=17-5G^Q^A
Oct 29 23:16:19 kernel: RRM_EnqueueNeighborRep() : send Neighbor RSP
Oct 29 23:16:47 kernel: pSsid=17-5G^Q^A
Oct 29 23:16:47 kernel: RRM_EnqueueNeighborRep() : send Neighbor RSP
Oct 29 23:18:56 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:19:12 kernel: sta port not secure, os should not send packets!!!
Oct 29 23:24:40 kernel: sta port not secure, os should not send packets!!!


我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2023-1-4 13:08 | 显示全部楼层
https://www.right.com.cn/forum/thread-8092383-1-10.html
使用大佬的3.4未超频固件解决WiFi断流问题
我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-10-30 07:41 来自手机 | 显示全部楼层
建议重刷 换固件 不开出国模式

点评

我这个固件是没有出国的,已经换了好几个了  详情 回复 发表于 2022-11-1 12:09
我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-10-30 15:29 | 显示全部楼层
https://opt.cn2qq.com/padavan/ 到这个网址下载RM2100 固件重新刷机试试

点评

我试试,谢谢回复  详情 回复 发表于 2022-11-1 12:09
我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-10-30 22:02 | 显示全部楼层
ac2100 有两种芯片 有个是晶豪 有个是东芝  

点评

我的是景豪的  详情 回复 发表于 2022-11-8 03:49
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2022-11-1 12:09 | 显示全部楼层
anizhuan 发表于 2022-10-30 15:29
https://opt.cn2qq.com/padavan/ 到这个网址下载RM2100 固件重新刷机试试

我试试,谢谢回复
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2022-11-1 12:09 | 显示全部楼层
ctrrr 发表于 2022-10-30 07:41
建议重刷 换固件 不开出国模式

我这个固件是没有出国的,已经换了好几个了
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2022-11-8 03:49 | 显示全部楼层
风为你而冷 发表于 2022-10-30 22:02
ac2100 有两种芯片 有个是晶豪 有个是东芝

我的是景豪的
我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-11-14 15:33 | 显示全部楼层
LZ解决了没,我的也爱断网,刷回官方解决的

点评

解决了,刷了没有超频的3.4的老毛子  详情 回复 发表于 2023-1-4 13:03
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2023-1-4 13:03 | 显示全部楼层
zuiaichuan 发表于 2022-11-14 15:33
LZ解决了没,我的也爱断网,刷回官方解决的

解决了,刷了没有超频的3.4的老毛子
我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )|网站地图

GMT+8, 2023-1-29 14:39

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

| 江苏省互联网有害信息举报中心 举报信箱:js12377@jschina.com.cn 举报电话:025-88802724 | 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797
快速回复 返回顶部 返回列表