大佬求救，研究不明白n1想按tailscale

a386472143

root@OpenWrt:~# opkg install libustream-openssl ca-bundle kmod-tun
Multiple packages (libgcc1 and libgcc1) providing same name marked HOLD or PREFER. Using latest.
Package libustream-openssl20201210 (2022-01-16-868fd881-2) installed in root is up to date.
Package ca-bundle (20211016-1) installed in root is up to date.
Package kmod-tun (5.15.60-1) installed in root is up to date.
Collected errors:
* pkg_hash_check_unresolved: cannot find dependency kernel (= 5.15.80-1-230afa09e5c7e50edea8776dc720dfdb) for kmod-tun
root@OpenWrt:~# opkg install libustream-openssl ca-bundle kmod-tun
Multiple packages (libgcc1 and libgcc1) providing same name marked HOLD or PREFER. Using latest.
Package libustream-openssl20201210 (2022-01-16-868fd881-2) installed in root is up to date.
Package ca-bundle (20211016-1) installed in root is up to date.
Package kmod-tun (5.15.60-1) installed in root is up to date.
Collected errors:
* pkg_hash_check_unresolved: cannot find dependency kernel (= 5.15.80-1-230afa09e5c7e50edea8776dc720dfdb) for kmod-tun

a386472143

Base on OpenWrt R22.8.18 by lean & lienol  Kernel 5.15.61-flippy-75+o  Packaged by flippy on 2022-08-18  PLATFORM: amlogic  SOC: s905d  BOARD: n1  设备信息： Phicomm N1 CPU 型号:  AArch64 : Cortex-A53 x 4 系统负载:  0.04 0.05 0.06       运行时间:  5小时 51分钟 26秒             环境温度:  47.0 °C              当前频率:  1000 Mhz 内存已用:  11% of 1809MB        IP  地址:  192.168.0.2 启动存储:  54% of 960.0M        系统存储:  54% of 960.0M          root@OpenWrt:~# ls /etc/rc.d/S*tailscale* /etc/rc.d/S99tailscale root@OpenWrt:~# Tailscale up -bash: Tailscale: command not found root@OpenWrt:~# tailscale up failed to connect to local tailscaled (which appears to be running as tailscaled, pid 20388). Got error: Failed to connect to local Tailscale daemon for /localapi/v0/status; not running? Error: dial unix /var/run/tailscale/tailscaled.sock: connect: no such file or directory root@OpenWrt:~#

a386472143

卡死了，完全进不去下一步

superzjg

kmod与内核相关的东西，最好是编译固件编进去。
看报错是版本不匹配，需要5.15.80-1，而只安装了5.15.60-1.

a386472143

superzjg 发表于 2022-12-8 21:46
kmod与内核相关的东西，最好是编译固件编进去。
看报错是版本不匹配，需要5.15.80-1，而只安装了5.15.60- ...

好像不是，看上面也是61，搞不懂了

blubber0302

a386472143 发表于 2022-12-9 00:12
好像不是，看上面也是61，搞不懂了

内核版本那串hash后缀不一样 编译时config不一样hash就不一样

blubber0302

foxconndmd 发表于 2022-12-10 10:13
内核版本那串hash后缀不一样 编译时config不一样hash就不一样

看错了 内核版本也不一样

頖縌

没有按步骤来。看GitHub上官方教程

頖縌

https://github.com/adyanth/openwrt-tailscale-enabler

greyscale2

op docker 跑啊