求助！！！ttl 到下面的步骤怎么办

YongCun

1001d060 | 00000002 00000000 00000000 00000000
drm: 500 = 0x8
[DDR Reserve] ddr reserve mode not be enabled yet
DDR RESERVE Success 0
[EMI] ComboMCP not ready, using default setting
BYTE_swap:0
BYTE_swap:0
Window Sum 580, worse bit 1, min window 72
Window Sum 576, worse bit 8, min window 68
Window Sum 424, worse bit 0, min window 52
Window Sum 348, worse bit 9, min window 42
Window Sum 428, worse bit 0, min window 52
Window Sum 354, worse bit 9, min window 42
Window Sum 432, worse bit 0, min window 52
Window Sum 362, worse bit 11, min window 42
Window Sum 444, worse bit 0, min window 54
Window Sum 370, worse bit 9, min window 44
Window Sum 380, worse bit 8, min window 46
Window Sum 450, worse bit 3, min window 54
Window Sum 388, worse bit 11, min window 46
Window Sum 390, worse bit 15, min window 46
Window Sum 452, worse bit 2, min window 54
Window Sum 400, worse bit 15, min window 48
NOTICE:  EMI: Detected DRAM size: 256MB
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  CPU: MT7981 (1300MHz)
NOTICE:  SPI_NAND parses attributes from parameter page.
NOTICE:  SPI_NAND Detected ID 0xc8
NOTICE:  Page size 2048, Block size 131072, size 134217728
NOTICE:  Initializing NMBM ...
NOTICE:  Signature found at block 1023 [0x07fe0000]
NOTICE:  First info table with writecount 0 found in block 960
NOTICE:  Second info table with writecount 0 found in block 963
NOTICE:  NMBM has been successfully attached in read-only mode
ERROR:   BL2: Failed to load image id 3 (-2)

邪恶海盗

关键是你想干啥?

-------------

YongCun

邪恶海盗 发表于 2024-1-29 17:41
关键是你想干啥?

-------------

救砖啊救砖啊救砖啊救砖啊救砖啊v

邪恶海盗

YongCun 发表于 2024-1-29 18:11
救砖啊救砖啊救砖啊救砖啊救砖啊v

不是应该在BootLoader启动时中断再操作么?