首发中兴 F7615uv3b 拆机 TTL 接线图

xhy30

首发中兴 F7615uv3b 拆机 TTL 接线图

xhy30

SPI NAND
start read bootloader
secure boot
CBC decrypt OK!
CBC decrypt OK!
CBC decrypt OK!
verify OK!
Jump

enter bootloader...
pll init, cpu freq=1000 MHz

crpm init ok
product_vid=63
DDR3 size, 0x20000000=512MiB,HALF_MODE=0
DDR3 1333 Mbps

ddr init ok
SPI NAND
ncfg:1
0,40,b,800
secure uboot
verify OK!
backup header!!
Jump


U-Boot 2021.01 (Jan 06 2025 - 16:31:58 +0800)

CPU  : ZX279133@A53x2,1000MHZ
Model: ZTE 133
DRAM:  512 MiB
Relocation Offset is: 1d6a2000
clk_register: failed to get sd_wclk_mux device (parent of sd_wclk_div), idx = 0
clk_register: failed to get nand_xclk device (parent of nand_wclk), idx = 1
clk_register: failed to get clk1376m_div device (parent of pon_core_clk_mux), idx = 2
clk_register: failed to get clk40m device (parent of pcie_25m_mux), idx = 3
clk_register: failed to get pon_tm_aclk device (parent of tzc400_pon_aclk), idx = 4
product_vid = 63
vid=63-F7615UV3b
mtk reset,66
boot_ctrl value=====3
bootsel=3
Disable watchdog.
el=3
NAND:  zs->cs_regmap 0000000000000000
zx_sfc_probe: enter
zx_sfc_probe: done
spi_nand spi-flash@0: READ ID data: 01-25-01, skyhigh SPI NAND was found.
spi_nand spi-flash@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
spinand name:spi-nand0
Creating 14 MTD partitions on "spi-nand0":
0 MiB
Loading Environment from NAND... OK
In:    serial
Out:   serial
Err:   serial
clk_pll env is not setted, core clk won't change
Net:   rx data disable
innerGeLedPolarSet 1
innerGeLedPolarSet 1
innerGeLedPolarSet 1
innerGeLedPolarSet 1
mdio_miiphy_initialize ok
eth0
sec mode!

Hit 1 to upgrade software version
Hit any key to stop autoboot:  0
=>

alex_br

请问这个线是怎么接的啊

wslrd

很牛逼的样子

xmzhao0932

能做什么

Lime-Cao

xhy30 发表于 2025-6-13 18:46
SPI NAND
start read bootloader
secure boot

求教,怎么能获取超级管理员密码,talnet, ssh 如何登陆的

cola.

同求获取超密，固化Telnet的方法