本帖最后由 gj0518 于 2012-7-20 14:33 编辑
本固件基于官方最新测试版固件修改,添加一些功能,有中文,本人刷过,确实有双wan选项,由于没有双wan环境,不保证好用,特此声明.
Hey everyone, I am doing customized builds of Asus' firmware, and offering them for download. Currently based on 3.0.0.3.157, these custom builds are adding a few useful (IMHO) features on top of Asus' firmware, without radically changing the way it works, unlike other custom firmware projects such as TomatoUSB or DD-WRT. Just like previous builds, simply flash it like a regular Asus firmware. No need to reset your settings or anything. Make sure you read the included README for additional information. The source code including all my changes can be found on Github (see the link below; my version can be found in the "merlin" branch)
Hope you like it Download: https://github.com/RMerl/asuswrt-merlin/downloads
Download (mirror): http://www.lostrealm.ca/asuswrt-merlin Source code: https://github.com/RMerl/asuswrt-merlin Changelog: (Older entries removed)
3.0.0.3.108.5:
- NEW: Crond starts at boot time.
- NEW: init-start is a new user script that will be run early on at boot time (right after jffs is mounted, and before any service gets started)
- NEW: Can save traffic history to a custom location (USB or JFFS, for instance) to preserve it between reboots.
- NEW: Added Monthly traffic page (ported from Tomato)
- NEW: Added the Performance Tuning page (with temperature)
- FIXED: Webui authentication was bypassed by the web server
- FIXED: Httpd crash when uploading a FW or settings file over https - should simply fail now. For now you have to use http for flashing the FW or restoring your settings from a saved config file.
3.0.0.3.108.6:
- NEW: HTTP access list (backported from build 112)
- NEW: PPTP virtual** encryption options (backported from build 112)
- FIXED: Traffic history location was't properly saved when changed in webui.
- FIXED: Disabled traffic history saving to nvram for now, to avoid people accidentally filling their limited nvram space.
- FIXED: Missing bottom pixels from the bottom of General menu
- FIXED: Removed invalid CSS attribute
- FIXED: typo in virtual** iptables entries (bug in Asus's code)
3.0.0.3.108.7:
- NEW: Added no-ip.com support to DDNS (patch submitted by Igor Pavlov)
- NEW: Added webui page under System Log to display active/tracked network connections.
- NEW: Added netstat-nat command.
- NEW: Added pre-mount and post-mount user scripts (patch submitted by Shantanu Goel)
- NEW: Allows tweaking TCP/UDP connection tracking timeouts
- FIXED: Removed check in Asus's code that would reject txpower > 80 unless you clicked three times on Apply (?!). NOTE: Still not sure power setting even works, as I get -80db from the other end of the house no matter if I use 40 or 500 mW.
3.0.0.3.130.8:
- NEW: Rebased patches on 3.0.0.4.130 (RT-N53U sources). Build 130 brings various code changes to IPv6, not sure what else (as I have no changelog between 112 and 130). The QoS code remains from build 108, as build 130 is unstable.
- NEW: Added "diff" utility
- NEW: Keyword-based filter (new in 130)
- FIXED: Firmware/settings can now be uploaded over HTTPS (bug fixed by Asus)
- FIXED: Buffer overflow in networkmap that would cause garbled device names to appear on the clists list (bug in Asus's code)
- FIXED: Firewall would break when applying a game preset that had multiple ports separated by a "," (bug in Asus's code)
- FIXED: WOL through webui wasn't working when IPv6 is enabled
- FIXED: Memory leak in sit.ko (backported from Linux 2.6.25.3)
3.0.0.3.130.9: - NEW: Enabled new Dual WAN support from Asus
- FIXED: no-ip DDNS entry would revert to Asus DDNS on webui
3.0.0.3.144.10: - NEW: Rebased on 3.0.0.3.144.
- NEW: Support for 64K NVRAM enabled. ***First flash will wipe out ALL your settings! And you cannot restore from saved settings - you must manually reconfigure everything. Be warned!***
- NEW: Enabled support for Broadcom Wimax devices
- NEW: Added cifs kernel module (for mounting remote SMB shares)
- NEW: Added layer7 iptables matching
- NEW: Added user-options for DHCP on the WAN page
- FIXED: Router crashing when connecting to it over Wifi and running the newer QoS code (disabled GRO)
- FIXED: Router crashing when connecting to a network device behind the router from over a virtual** connection (disabled GRO).
- FIXED: Incorrect timezone set unless enabling manual DST.
3.0.0.3.144.11:
- NEW: Name field added to DHCP reservation list
- NEW: Webui option to enable resolving IPs on the Connections tab
- NEW: Store a list of computer MACs to use as WOL targets
- CHANGED: Increased dhcp options from 32 to 128 characters
- FIXED: Brought max PPTPD password lenght back to 32 chars (Asus had reduced it to 16 in recent versions)
- FIXED: Retrieve dhcpc options for the correct wan interface
3.0.0.3.157.12 Beta 1: - NEW: Rebased on 3.0.0.3.157. Notable changes from Asus:
. IPv6 tunnel memory leak fixed
. They fixed many issues, making some of my patches no longer necessary, such as timezone DST, https auth, etc...
. Many additional 3G USB devices supported
. Upgraded radvd - CHANGED: Merged this file with the RT-N16 version.
- CHANGED: Re-enabled Dual WAN (was disabled in RM10-11 since it was broken in build 144)
- CHANGED: Made tracked connections load async from rest of the page
- CHANGED: Increased hostname width on Connection status page
3.0.0.3.157.12 Beta 2:
- FIXED: NAT loopback rules would actually NAT every lan to lan connections instead of only those needing the loopback (bug in Asus's code). Replaced with new code based on a suggestion from Phuzi0n on the DD-WRT forums.
- FIXED: GRO compatibility with PPTPD (related to NAT loopback)
- FIXED: Accessing the WOL page would make it resend the last WOL request.
- CHANGED: Re-enabled GRO support (RT-N66U)
- CHANGED: Improvements to the WOL page.
|