大佬救救我的360V6

woya***

TTL如下： 按照网上的教程怎么刷也刷不上，这个就是砖了吗？？？




Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64
S - Boot Interface: NAND
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e5
S - JTAG ID @ 0x000a607c = 0x001390e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0xda161503
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B -      3413 - PBL, Start
B -       593 - bootable_media_detect_entry, Start
B -      4338 - bootable_media_detect_success, Start
B -      5206 - elf_loader_entry, Start
B -      5378 - auth_hash_seg_entry, Start
B -      7845 - auth_hash_seg_exit, Start
B -      8345 - elf_segs_hash_verify_entry, Start
B -    110499 - elf_segs_hash_verify_exit, Start
B -    114924 - auth_xbl_sec_hash_seg_entry, Start
B -    115068 - auth_xbl_sec_hash_seg_exit, Start
B -    121615 - xbl_sec_segs_hash_verify_entry, Start
B -    121616 - xbl_sec_segs_hash_verify_exit, Start
B -    122546 - PBL, End
B -    103303 - SBL1, Start
B -    243420 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B -    245860 - clock_init, Start
D -      2745 - clock_init, Delta
B -    254339 - boot_flash_init, Start
D -     29829 - boot_flash_init, Delta
B -    287432 - sbl1_ddr_set_default_params, Start
D -       244 - sbl1_ddr_set_default_params, Delta
B -    294081 - boot_config_data_table_init, Start
D -      4727 - boot_config_data_table_init, Delta - (575 Bytes)
B -    303902 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0
B -    308751 - Image Load, Start
D -      6588 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B -    318084 - Image Load, Start
D -      5063 - PMIC Image Loaded, Delta - (0 Bytes)
B -    325953 - sbl1_ddr_set_params, Start
B -    330925 - CPR configuration: 0x366
B -    334127 - Pre_DDR_clock_init, Start
D -       213 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    370819 - Image Load, Start
D -       458 - APDP Image Loaded, Delta - (0 Bytes)
B -    383903 - Image Load, Start
D -       427 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B -    386343 - Image Load, Start
D -       823 - Auth Metadata
D -       641 - Segments hash check
D -     22357 - QSEE Dev Config Image Loaded, Delta - (36354 Bytes)
B -    410682 - Image Load, Start
D -      6588 - Auth Metadata
D -     10462 - Segments hash check
D -    335836 - QSEE Image Loaded, Delta - (1470632 Bytes)
B -    746975 - Image Load, Start
D -       702 - Auth Metadata
D -       976 - Segments hash check
D -     35075 - RPM Image Loaded, Delta - (102664 Bytes)
B -    783728 - Image Load, Start
D -       701 - Auth Metadata
D -      3019 - Segments hash check
D -    114893 - APPSBL Image Loaded, Delta - (525616 Bytes)
B -    914268 - SBL1, End
D -    811270 - SBL1, Delta
S - Flash Throughput, 4000 KB/s  (2136513 Bytes,  429066 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz


U-Boot 2016.01 (Feb 24 2022 - 22:36:04 +0800)

DRAM:  smem ram ptable found: ver: 2 len: 4
512 MiB
NAND:  ONFI device found
ID = 9500a1ef
Vendor = ef
Device = a1
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI0 is not defined in the device tree
In:    serial@78B1000
Out:   serial@78B1000
Err:   serial@78B1000
machid: 8030200
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
eth2 MAC Address from ART is not valid
eth3 MAC Address from ART is not valid
eth4 MAC Address from ART is not valid
eth5 MAC Address from ART is not valid
Autobooting in 2 seconds
ubi0: attaching mtd1
ubi0: scanning is finished
UBI init error 22

Net:   MAC0 addr:0:3:7f:ba:db:ad
PHY ID1: 0x4d
PHY ID2: 0xd0b1
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
eth0

Net:   MAC0 addr:0:3:7f:ba:db:ad
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
, eth0
IPQ6018#