OpBoot 2018.01 [local,local] (Jul 13 2018 - 09:45:41)
RT-AC58U bootloader version: 1.0.0.5
smem ram ptable found: ver: 1 len: 3
ASUS RT-AC58U gpio init : wps / reset pin
DRAM: 128 MiB
machid : 0x8010100
Maximum malloc length: 4096 KBytes
mem_malloc_start/brk/end: 0x86ee0000/86ee0000/872f0000
Relocation offset: 0
NAND: spi_nand: spi_nand_flash_probe SF NAND ID 0:ef:aa:21
SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
SF: Detected MX25L1605D with page size 4 KiB, total 2 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000
130 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
name : offset size
0:SBL1 : 00000000 00040000
0:MIBIB : 00040000 00020000
0 SEE : 00060000 00060000
0:CDT : 000c0000 00010000
0 DRPARAMS : 000d0000 00010000
0:APPSBLENV : 000e0000 00010000
0:APPSBL : 000f0000 00080000
0:ART : 00170000 00010000
machid: 8010100
flash_type: 0
Creating 1 MTD partitions on "nand1":
0x00000000-0x08000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 56692
UBI: attached mtd2 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 128 MiB
UBI: number of good PEBs: 1024
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 6
UBI: available PEBs: 30
UBI: total number of reserved PEBs: 994
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 409/56
UBI: image sequence number: 1117443911
UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram
UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory
UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2
UBI: 3 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 5 linux
UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2
UBI: 5 b5 1 0 dynamic 1f000 b5 15eb000 1f000 0 0 5 jffs2
UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ec0ce0
EEPROM set 0: OK (version 34)
Read 0x1f000 bytes from volume [Factory2] offset 0x0 to 86ec0ce0
EEPROM set 1: OK (version 34)
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ee2f58
Select EEPROM set 0 at offset 0x0.
Please choose the operation:
0: Load System code then write to Flash via HTTP.
4: Entr boot command line interface.
3: Boot System code via Flash (default). 0
3: Boot System code via Flash (default).
RT-AC58U bootloader version: 1.0.0.5
MAC Address: 887:F6:03:21:A0
Read 0x40 bytes from volume [linux] offset 0x0 to 84000000
FIT/FDT format image found at 0x84000000, size 0x016f0938
Read 0x16f0978 bytes from volume [linux] offset 0x0 to 84000000
## Booting kernel from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-3.0
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x840000e0
Data Size: 2094300 Bytes = 2 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 28687a71
## Loading init Ramdisk from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'rootfs@1' ramdisk subimage
Description: Root File System
Type: RAMDisk Image
Compression: lzma compressed
Data Start: 0x841ff69c
Data Size: 21924106 Bytes = 20.9 MiB
Architecture: ARM
Hash algo: crc32
Hash value: dbeff659
## Flattened Device Tree from FIT Image at 84000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x856e80a4
Data Size: 34175 Bytes = 33.4 KiB
Architecture: ARM
Hash algo: crc32
Hash value: db893700
Hash algo: sha1
Hash value: 8a1d44bb71c536ad38d793af0a7851f0e2bd2fef
Booting using the fdt blob at 0x856e80a4
Read 0x28 bytes from volume [linux2] offset 0x0 to 86edfc30
Uncompressing Kernel Image ... OK
Loading Device Tree to 86ed4000, end 86edf57e ... OK
Using machid 0x8010100 from environment
Starting kernel ...
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2018-12-8 15:04
显身卡
