H3C TX1801 plus 线刷报错怎么办呢？找不到教程
本帖最后由 happy333 于 2023-10-25 23:08 编辑Xshell 7 (Build 0115)
Copyright (c) 2020 NetSarang Computer, Inc. All rights reserved.
Type `help' to learn how to use Xshell prompt.
$
Connecting to COM3...
Connected.
:/mnt/map is exist
: EasyMesh_BootStart
:
**************************************************************************
* Copyright (c) 2004-2020 New H3C Technologies Co.,Ltd. *
* All rights Reserved. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
**************************************************************************
User interface Aux0/0 is available
Please press ENTER.
: MESH_MODE_AUTO
: path=/mnt/map/mapd_cfg pcKey=DeviceRole pcVal=0
: szCmd cp -rf /var/.vfstmpcfg /mnt/map/mapd_cfg
: path=/mnt/map/1905d.cfg pcKey=map_agent pcVal=1
: szCmd cp -rf /var/.vfstmpcfg /mnt/map/1905d.cfg
: path=/mnt/map/1905d.cfg pcKey=map_root pcVal=0
: szCmd cp -rf /var/.vfstmpcfg /mnt/map/1905d.cfg
:CFG_Set_EasyMesh_WtsConfig
: Hal_User_EasyMesh_StartProc 1
:
: wlan_cfghandler_wps_table
----- killed all apps-----
Auto Mode
start wapp ok.
: CUSTOM: Check the version of the custom.conf, Cur version = V2.0, Def version = V2.0.
: CUSTOM: Same version number, no need to continue.
Default interface: ra0
Map cfg file: /mnt/map/mapd_cfg Map user cfg: /mnt/map/mapd_user.cfg
Initialize socket
Initialize IAPP
Initialize ralink wext interface
get param(Enable_WPS_toggle_5GL_5GH) fail
get_if_info for br0
interface index is 38
get_if_info OK
Clean up temporary socket
bind_arp: ifindex=38
Binding to ifindex 38
bind_arp: ifindex=5
Binding to ifindex 5
iapp> mt_iapp_get_wifi_iface_mac - IfName: ra0
MAC: 0x7ff727cc, len = 6
0x0000 : 90 23 b4 77 40 7d
bind_arp: ifindex=4
Binding to ifindex 4
bind_arp: ifindex=36
Binding to ifindex 36
bind_arp: ifindex=11
Binding to ifindex 11
bind_arp: ifindex=10
Binding to ifindex 10
bind_arp: ifindex=37
Binding to ifindex 37
wapp_set_interworking_enable
wapp_set_interworking_enable
Disable hotspot2.0 feature(ra0)
Disable hotspot2.0 feature(rax0)
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:17:40:7d, ifname = ra1
(3224375296) aquired a new card id 1
wapp_reset_backhaul_config
misc_cap (5):
max_num_of_cli = 64
max_num_of_bss = 32
num_of_bss = 32
max_num_of_block_cli = 128
ht_cap (5):
tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 0
vht_cap (5):
sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
tx_stream = 2, rx_stream = 2
sgi_80 = 1, sgi_160 = 1
vht160 = 0, vht8080 = 0
su_bf = 1, mu_bf = 0
he_cap (5):
tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (5)
op_class = 81
op_ch = 10
band = 78
ch_list_num = 0
non_op_chn_num = 13
dl_mcs = 11
op_class: (5)
num_of_op_class = 6
opClass = 81, chn_num = 13
opClass = 83, chn_num = 9
opClass = 84, chn_num = 9
opClass = 128, chn_num = 3
opClass = 129, chn_num = 1
opClass = 130, chn_num = 3
bss_info: (5)
table idx = 0
ssid = ChinaNet-427C
SsidLen = 13
map role = 32
Bssid =
Identifier =
driver_wnm_btm_onoff
driver_wnm_btm_onoff: cmd->command_body = 1
driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 1, mac = 90:23:b4:77:40:7d, ifname = ra0
wapp_reset_backhaul_config
misc_cap (4):
max_num_of_cli = 64
max_num_of_bss = 32
num_of_bss = 32
max_num_of_block_cli = 128
ht_cap (4):
tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 0
vht_cap (4):
sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
tx_stream = 2, rx_stream = 2
sgi_80 = 1, sgi_160 = 1
vht160 = 0, vht8080 = 0
su_bf = 1, mu_bf = 0
he_cap (4):
tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (4)
op_class = 81
op_ch = 10
band = 78
ch_list_num = 0
non_op_chn_num = 13
dl_mcs = 11
op_class: (4)
num_of_op_class = 6
opClass = 81, chn_num = 13
opClass = 83, chn_num = 9
opClass = 84, chn_num = 9
opClass = 128, chn_num = 3
opClass = 129, chn_num = 1
opClass = 130, chn_num = 3
bss_info: (4)
table idx = 1
ssid =
SsidLen = 0
map role = 32
Bssid =
Identifier =
driver_wnm_btm_onoff
driver_wnm_btm_onoff: cmd->command_body = 1
driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 2, mac = 96:23:b4:77:40:7d, ifname = apcli0
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:77:40:7d, ifname = rax1
wapp_reset_backhaul_config
misc_cap (11):
max_num_of_cli = 64
max_num_of_bss = 32
num_of_bss = 32
max_num_of_block_cli = 128
ht_cap (11):
tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 1
vht_cap (11):
sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
tx_stream = 2, rx_stream = 2
sgi_80 = 1, sgi_160 = 1
vht160 = 0, vht8080 = 0
su_bf = 1, mu_bf = 0
he_cap (11):
tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (11)
op_class = 128
op_ch = 36
band = 177
ch_list_num = 0
non_op_chn_num = 3
dl_mcs = 11
op_class: (11)
num_of_op_class = 7
opClass = 115, chn_num = 4
opClass = 125, chn_num = 5
opClass = 116, chn_num = 2
opClass = 126, chn_num = 2
opClass = 128, chn_num = 3
opClass = 129, chn_num = 1
opClass = 130, chn_num = 3
bss_info: (11)
table idx = 2
ssid = ChinaNet-427C-5G
SsidLen = 16
map role = 32
Bssid =
Identifier =
driver_wnm_btm_onoff
driver_wnm_btm_onoff: cmd->command_body = 1
driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:67:40:7d, ifname = rax0
wapp_reset_backhaul_config
misc_cap (10):
max_num_of_cli = 64
max_num_of_bss = 32
num_of_bss = 32
max_num_of_block_cli = 128
ht_cap (10):
tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 1
vht_cap (10):
sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
tx_stream = 2, rx_stream = 2
sgi_80 = 1, sgi_160 = 1
vht160 = 0, vht8080 = 0
su_bf = 1, mu_bf = 0
he_cap (10):
tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (10)
op_class = 128
op_ch = 36
band = 177
ch_list_num = 0
non_op_chn_num = 3
dl_mcs = 11
op_class: (10)
num_of_op_class = 7
opClass = 115, chn_num = 4
opClass = 125, chn_num = 5
opClass = 116, chn_num = 2
opClass = 126, chn_num = 2
opClass = 128, chn_num = 3
opClass = 129, chn_num = 1
opClass = 130, chn_num = 3
bss_info: (10)
table idx = 3
ssid =
SsidLen = 0
map role = 32
Bssid =
Identifier =
driver_wnm_btm_onoff
driver_wnm_btm_onoff: cmd->command_body = 1
driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 2, mac = 9a:23:b4:77:40:7d, ifname = apclix0
startWAPP 2
start wapp ok.
Write reg=10, value=ffffffe0
Write reg=34, value=8160816
count =4 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =4 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =5 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =5 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
daemon mapd attached \x00/tmp/wapp_ctrl
map_send_wirelss_inf_info
send info ra1, role: wiap, dev type = 1
MAC Address = 92:23:b4:17:40:7d
send info ra0, role: wiap, dev type = 1
MAC Address = 90:23:b4:77:40:7d
send info apcli0, role: wista, dev type = 2
MAC Address = 96:23:b4:77:40:7d
send info rax1, role: wiap, dev type = 1
MAC Address = 92:23:b4:77:40:7d
send info rax0, role: wiap, dev type = 1
MAC Address = 92:23:b4:67:40:7d
send info apclix0, role: wista, dev type = 2
MAC Address = 9a:23:b4:77:40:7d
map_send_wirelss_inf_info
send info ra1, role: wiap, dev type = 1
MAC Address = 92:23:b4:17:40:7d
send info ra0, role: wiap, dev type = 1
MAC Address = 90:23:b4:77:40:7d
send info apcli0, role: wista, dev type = 2
MAC Address = 96:23:b4:77:40:7d
send info rax1, role: wiap, dev type = 1
MAC Address = 92:23:b4:77:40:7d
send info rax0, role: wiap, dev type = 1
MAC Address = 92:23:b4:67:40:7d
send info apclix0, role: wista, dev type = 2
MAC Address = 9a:23:b4:77:40:7d
map_build_chn_pref
map_build_chn_pref
map_build_chn_pref
map_build_chn_pref
map_acl_system_cmd ACL type = 2
map_acl_system_cmd ACL type = 2
map_acl_system_cmd ACL type = 2
map_acl_system_cmd ACL type = 2
: EasyMesh_BootStart End
: 2.4G channel change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3270
: 5G channel change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3282
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3278
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3278
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3278
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3278
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3290
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3290
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3290
: ssid name change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3290
: led status change
: Call MW_MsgSend failed, iRet=-1!
: RC_SendMsgByRcCmd error iRet -1!, 3222
跑成这样怎么整啊 万能的大侠有么:Q 参考资料：https://www.toutiao.com/article/7200357951004410383/?channel=&source=search_tab 本帖最后由 happy333 于 2023-10-26 00:52 编辑
这是完整的刷机教程
个人遇到了个特殊情况，就是先插入ttl，再接电源，xshell工具没有任何输出，也没有跑码
我的解决方式如下：
前5步不变
1、拔掉ttl设备，插入电源，然后插入ttl设备
2、等待跑码结束，此时回车显示的是“H3C-TX1801”
3、输入reboot，按任意键（会出现启动中断的情况），此时输入boot，按下键，到第4项，刷入uboot即可
其他的步骤同上
二、输入上面图的IP地址和刷写的U-BOOT 刷写BOOT 记得完成后按Y 自动重启
是的，不错，我就是这样跟长码后手动输入BOOT命令，跳出来那 1、2、3、4、5 几个菜单，再选择 第4项，再选择事先放入TTFP目录下的Bin文件刷u-boot的。 搞好了吗？？有编程器固件吗，有的话上传一下谢谢 厉害厉害厉害！！！！ 用的putty还是Xshell 7 解决的？这两个哪个好用？看吧里的热帖是用的putty，这个解决方法通用吗？
页:
[1]