H3C TX1801 plus 线刷报错怎么办呢？找不到教程

happy333

happy333

Xshell 7 (Build 0115)
Copyright (c) 2020 NetSarang Computer, Inc. All rights reserved.

Type `help' to learn how to use Xshell prompt.
[C:\~]$

Connecting to COM3...
Connected.

[EasyMesh_CFG_DirInit.832]:  /mnt/map is exist
[EasyMesh_BootStart.777]: EasyMesh_BootStart

[Hal_User_EasyMesh_Enable.52]: [1]


**************************************************************************
*    Copyright (c) 2004-2020 New H3C Technologies Co.,Ltd.               *
*    All rights Reserved.                                                *
*    Without the owner's prior written consent,                          *
*    no decompiling or reverse-engineering shall be allowed.             *
**************************************************************************

User interface Aux0/0 is available

Please press ENTER.
[EasyMesh_BootStart.786]: MESH_MODE_AUTO

[VFS_SetConfigValueByKey.933]: path=/mnt/map/mapd_cfg pcKey=DeviceRole pcVal=0

[VFS_SetConfigValueByKey.995]: szCmd cp -rf /var/.vfstmpcfg /mnt/map/mapd_cfg
[VFS_SetConfigValueByKey.933]: path=/mnt/map/1905d.cfg pcKey=map_agent pcVal=1

[VFS_SetConfigValueByKey.995]: szCmd cp -rf /var/.vfstmpcfg /mnt/map/1905d.cfg
[VFS_SetConfigValueByKey.933]: path=/mnt/map/1905d.cfg pcKey=map_root pcVal=0

[VFS_SetConfigValueByKey.995]: szCmd cp -rf /var/.vfstmpcfg /mnt/map/1905d.cfg
[VFS_Set_EasyMesh_WtsConfig.1039]:  CFG_Set_EasyMesh_WtsConfig
[Hal_User_EasyMesh_StartProc.127]: Hal_User_EasyMesh_StartProc 1

[Hal_User_EasyMesh_StartProc.199]: [sh /mnt/map/H3CEasyMesh.sh 0  > /dev/console&]

[wlan_cfghandler_wps_table.3261]: wlan_cfghandler_wps_table
----- killed all apps  -----
Auto Mode
start wapp ok.
[Custom_Conf_CheckVersion.1862]: CUSTOM: Check the version of the custom.conf, Cur version = V2.0, Def version = V2.0.
[Custom_Conf_CheckVersion.1867]: CUSTOM: Same version number, no need to continue.
[process_options]Default interface: ra0
[main]Map cfg file: /mnt/map/mapd_cfg Map user cfg: /mnt/map/mapd_user.cfg
[main]Initialize socket
[main]Initialize IAPP
[driver_wext_init]Initialize ralink wext interface
[get_map_parameters]get param(Enable_WPS_toggle_5GL_5GH) fail
get_if_info for br0
interface index is 38
get_if_info OK
Clean up temporary socket
bind_arp: ifindex=38
Binding to ifindex 38
bind_arp: ifindex=5
Binding to ifindex 5
[mt_iapp_get_wifi_iface_mac]iapp> mt_iapp_get_wifi_iface_mac - IfName[0]: ra0
MAC: 0x7ff727cc, len = 6
0x0000 : 90 23 b4 77 40 7d
bind_arp: ifindex=4
Binding to ifindex 4
bind_arp: ifindex=36
Binding to ifindex 36
bind_arp: ifindex=11
Binding to ifindex 11
bind_arp: ifindex=10
Binding to ifindex 10
bind_arp: ifindex=37
Binding to ifindex 37
[wapp_set_interworking_enable]wapp_set_interworking_enable
[wapp_set_interworking_enable]wapp_set_interworking_enable
[hotspot_onoff]Disable hotspot2.0 feature(ra0)
[hotspot_onoff]Disable hotspot2.0 feature(rax0)
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:17:40:7d, ifname = ra1
(3224375296) aquired a new card id 1
[wapp_reset_backhaul_config]wapp_reset_backhaul_config
misc_cap (5):
         max_num_of_cli = 64
         max_num_of_bss = 32
         num_of_bss     = 32
         max_num_of_block_cli = 128
ht_cap (5):
         tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 0
vht_cap (5):
         sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
         tx_stream = 2, rx_stream = 2
         sgi_80 = 1, sgi_160 = 1
         vht160 = 0, vht8080 = 0
         su_bf = 1, mu_bf = 0
he_cap (5):
         tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (5)
         op_class = 81
         op_ch = 10
         band = 78
         ch_list_num = 0
         non_op_chn_num = 13
         dl_mcs = 11
op_class: (5)
         num_of_op_class = 6
         opClass = 81, chn_num = 13
         opClass = 83, chn_num = 9
         opClass = 84, chn_num = 9
         opClass = 128, chn_num = 3
         opClass = 129, chn_num = 1
         opClass = 130, chn_num = 3
bss_info: (5)
         table idx = 0
         ssid = ChinaNet-427C
         SsidLen = 13
         map role = 32
         Bssid = [92][23][b4][17][40][7d]
         Identifier = [92][23][b4][17][40][7d]
[driver_wnm_btm_onoff]driver_wnm_btm_onoff
[driver_wnm_btm_onoff]driver_wnm_btm_onoff: cmd->command_body[0] = 1
[driver_rrm_onoff]driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 1, mac = 90:23:b4:77:40:7d, ifname = ra0
[wapp_reset_backhaul_config]wapp_reset_backhaul_config
misc_cap (4):
         max_num_of_cli = 64
         max_num_of_bss = 32
         num_of_bss     = 32
         max_num_of_block_cli = 128
ht_cap (4):
         tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 0
vht_cap (4):
         sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
         tx_stream = 2, rx_stream = 2
         sgi_80 = 1, sgi_160 = 1
         vht160 = 0, vht8080 = 0
         su_bf = 1, mu_bf = 0
he_cap (4):
         tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (4)
         op_class = 81
         op_ch = 10
         band = 78
         ch_list_num = 0
         non_op_chn_num = 13
         dl_mcs = 11
op_class: (4)
         num_of_op_class = 6
         opClass = 81, chn_num = 13
         opClass = 83, chn_num = 9
         opClass = 84, chn_num = 9
         opClass = 128, chn_num = 3
         opClass = 129, chn_num = 1
         opClass = 130, chn_num = 3
bss_info: (4)
         table idx = 1
         ssid =
         SsidLen = 0
         map role = 32
         Bssid = [90][23][b4][77][40][7d]
         Identifier = [90][23][b4][77][40][7d]
[driver_wnm_btm_onoff]driver_wnm_btm_onoff
[driver_wnm_btm_onoff]driver_wnm_btm_onoff: cmd->command_body[0] = 1
[driver_rrm_onoff]driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 2, mac = 96:23:b4:77:40:7d, ifname = apcli0
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:77:40:7d, ifname = rax1
[wapp_reset_backhaul_config]wapp_reset_backhaul_config
misc_cap (11):
         max_num_of_cli = 64
         max_num_of_bss = 32
         num_of_bss     = 32
         max_num_of_block_cli = 128
ht_cap (11):
         tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 1
vht_cap (11):
         sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
         tx_stream = 2, rx_stream = 2
         sgi_80 = 1, sgi_160 = 1
         vht160 = 0, vht8080 = 0
         su_bf = 1, mu_bf = 0
he_cap (11):
         tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (11)
         op_class = 128
         op_ch = 36
         band = 177
         ch_list_num = 0
         non_op_chn_num = 3
         dl_mcs = 11
op_class: (11)
         num_of_op_class = 7
         opClass = 115, chn_num = 4
         opClass = 125, chn_num = 5
         opClass = 116, chn_num = 2
         opClass = 126, chn_num = 2
         opClass = 128, chn_num = 3
         opClass = 129, chn_num = 1
         opClass = 130, chn_num = 3
bss_info: (11)
         table idx = 2
         ssid = ChinaNet-427C-5G
         SsidLen = 16
         map role = 32
         Bssid = [92][23][b4][77][40][7d]
         Identifier = [92][23][b4][77][40][7d]
[driver_wnm_btm_onoff]driver_wnm_btm_onoff
[driver_wnm_btm_onoff]driver_wnm_btm_onoff: cmd->command_body[0] = 1
[driver_rrm_onoff]driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 1, mac = 92:23:b4:67:40:7d, ifname = rax0
[wapp_reset_backhaul_config]wapp_reset_backhaul_config
misc_cap (10):
         max_num_of_cli = 64
         max_num_of_bss = 32
         num_of_bss     = 32
         max_num_of_block_cli = 128
ht_cap (10):
         tx_stream = 2, rx_stream = 2, sgi_20 = 1, sgi_40 = 1, ht_40 = 1
vht_cap (10):
         sup_tx_mcs[]= fa ff sup_rx_mcs[] = 250 255
         tx_stream = 2, rx_stream = 2
         sgi_80 = 1, sgi_160 = 1
         vht160 = 0, vht8080 = 0
         su_bf = 1, mu_bf = 0
he_cap (10):
         tx_stream = 2, rx_stream = 2, he_160 = 0, he_8080 = 0, he_mcs_len = 2
chn_list: (10)
         op_class = 128
         op_ch = 36
         band = 177
         ch_list_num = 0
         non_op_chn_num = 3
         dl_mcs = 11
op_class: (10)
         num_of_op_class = 7
         opClass = 115, chn_num = 4
         opClass = 125, chn_num = 5
         opClass = 116, chn_num = 2
         opClass = 126, chn_num = 2
         opClass = 128, chn_num = 3
         opClass = 129, chn_num = 1
         opClass = 130, chn_num = 3
bss_info: (10)
         table idx = 3
         ssid =
         SsidLen = 0
         map role = 32
         Bssid = [92][23][b4][67][40][7d]
         Identifier = [92][23][b4][67][40][7d]
[driver_wnm_btm_onoff]driver_wnm_btm_onoff
[driver_wnm_btm_onoff]driver_wnm_btm_onoff: cmd->command_body[0] = 1
[driver_rrm_onoff]driver_rrm_onoff
wdev_query_rsp_handle: dev_type = 2, mac = 9a:23:b4:77:40:7d, ifname = apclix0
startWAPP       2
start wapp ok.
Write reg=10, value=ffffffe0
Write reg=34, value=8160816
count =4 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =4 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =5 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
count =5 1=mapd_cli 2=/tmp/mapd_ctrl
mapd_interface_ctrl_open failed
Can't connect to /tmp/mapd_ctrl
daemon mapd attached \x00/tmp/wapp_ctrl
[WAPP]map_send_wirelss_inf_info
send info ra1, role: wiap, dev type = 1
MAC Address = 92:23:b4:17:40:7d
send info ra0, role: wiap, dev type = 1
MAC Address = 90:23:b4:77:40:7d
send info apcli0, role: wista, dev type = 2
MAC Address = 96:23:b4:77:40:7d
send info rax1, role: wiap, dev type = 1
MAC Address = 92:23:b4:77:40:7d
send info rax0, role: wiap, dev type = 1
MAC Address = 92:23:b4:67:40:7d
send info apclix0, role: wista, dev type = 2
MAC Address = 9a:23:b4:77:40:7d
[WAPP]map_send_wirelss_inf_info
send info ra1, role: wiap, dev type = 1
MAC Address = 92:23:b4:17:40:7d
send info ra0, role: wiap, dev type = 1
MAC Address = 90:23:b4:77:40:7d
send info apcli0, role: wista, dev type = 2
MAC Address = 96:23:b4:77:40:7d
send info rax1, role: wiap, dev type = 1
MAC Address = 92:23:b4:77:40:7d
send info rax0, role: wiap, dev type = 1
MAC Address = 92:23:b4:67:40:7d
send info apclix0, role: wista, dev type = 2
MAC Address = 9a:23:b4:77:40:7d
[map_build_chn_pref]map_build_chn_pref
[map_build_chn_pref]map_build_chn_pref
[map_build_chn_pref]map_build_chn_pref
[map_build_chn_pref]map_build_chn_pref
[map_acl_system_cmd]map_acl_system_cmd ACL type = 2
[map_acl_system_cmd]map_acl_system_cmd ACL type = 2
[map_acl_system_cmd]map_acl_system_cmd ACL type = 2
[map_acl_system_cmd]map_acl_system_cmd ACL type = 2
[EasyMesh_BootStart.808]: EasyMesh_BootStart End

[Monitor_SystemStatusChange_TimerProc.390]: 2.4G channel change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3270

[Monitor_SystemStatusChange_TimerProc.400]: 5G channel change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3282

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3278

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3278

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3278

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3278

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3290

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3290

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3290

[Monitor_SystemStatusChange_TimerProc.418]: ssid name change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3290

[Monitor_SystemStatusChange_TimerProc.501]: led status change
[MW_MsgSendAndRcvData.1422]: Call MW_MsgSend failed, iRet=-1!

[RC_SendMsgByRcCmd.160]: RC_SendMsgByRcCmd error iRet -1!, 3222

happy333

跑成这样怎么整啊 万能的大侠有么

happy333

参考资料：https://www.toutiao.com/article/ ... p;source=search_tab

happy333

这是完整的刷机教程
个人遇到了个特殊情况，就是先插入ttl，再接电源，xshell工具没有任何输出，也没有跑码
我的解决方式如下：
前5步不变
1、拔掉ttl设备，插入电源，然后插入ttl设备
2、等待跑码结束，此时回车显示的是“H3C-TX1801”
3、输入reboot，按任意键（会出现启动中断的情况），此时输入boot，按下键，到第4项，刷入uboot即可
其他的步骤同上








二、输入上面图的IP地址和刷写的U-BOOT 刷写BOOT 记得完成后按Y 自动重启

zhaofa520

是的，不错，我就是这样跟长码后  手动输入BOOT  命令，跳出来  那 1、2、3、4、5   几个菜单，再选择 第4项，再选择事先放入TTFP目录下的  Bin文件刷u-boot的。      

qqyh

搞好了吗？？有编程器固件吗，有的话上传一下谢谢

毁甜咩地

厉害厉害厉害！！！！

qqc

用的putty还是Xshell 7 解决的？这两个哪个好用？看吧里的热帖是用的putty，这个解决方法通用吗？

zxm3321

1802也是这么刷吗？