用TTL线把EA6700港版改美版问题的解决方法

vinsen

请问你的ttl线哪里买的，给个链接吧

njpet

这个帖子好啊，要留下

cybluesky

请问EA6500v2的TTL接法和这个一样吗

wft8430160

cybluesky 发表于 2015-8-25 13:24
请问EA6500v2的TTL接法和这个一样吗

RXD 和TXD掉转亲测，我的是美版的EA6500V2

lanmei

大家不要争了，把板子贴上来看看就哦了，有些硬件板子不一样，线是断开的，你怎么测也是没有值的

lawman

Mark一下,希望回家搞搞自己的EA4500,能修复起来.

alpha123

我是美版的EA6500V2，请问需要短接R18吗?还有Scrt怎么设置，波特率是不是115200?  ER18需要短接吗？

wfhwfh

不用短接的，但我一直不能中断，但可以登录账号，一真是找到到LAN和WIFI模块

1. Decompressing...done
   
2. Found a AMD NAND flash:
   
3. Total size:  128MB
   
4. Block size:  128KB
   
5. Page Size:   2048B
   
6. OOB Size:    64B
   
7. Sector size: 512B
   
8. Spare size:  16B
   
9. ECC level:   8-bit
   
10. Device ID: 0x01 0xf1 0x00 0x1d 0x01
    
11. 
    
12. 
    
13. CFE version 6.39.163.39 (r394801) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
    
14. Build Date: Mon Apr 29 14:39:11 CST 2013 (mike@localhost.localdomain)
    
15. Copyright (C) 2000-2008 Broadcom Corporation.
    
16. 
    
17. Init Arena
    
18. Init Devs.
    
19. Boot partition size = 262144(0x40000)
    
20. DDR Clock: 400 MHz
    
21. Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400                                                                                                                                                              MHz.
    
22. CPU type 0x0: 800MHz
    
23. Tot mem: 262144 KBytes
    
24. 
    
25. CFE mem:    0x00F00000 - 0x0109DF6C (1695596)
    
26. Data:       0x00F56650 - 0x00F56B18 (1224)
    
27. BSS:        0x00F56B28 - 0x00F9BF6C (283716)
    
28. Heap:       0x00F9BF6C - 0x0109BF6C (1048576)
    
29. Stack:      0x0109BF6C - 0x0109DF6C (8192)
    
30. Text:       0x00F00000 - 0x00F4B224 (307748)
    
31. Boot:       0x0109E000 - 0x010DE000
    
32. Reloc:      I:00000000 - D:00000000
    
33. 
    
34. Boot version: v2.1.10
    
35. 
    
36. Loader:raw Filesys:tftp Dev:(null) File:: Options:(null)
    
37. Loading: Failed.
    
38. Could not load :: Error
    
39. Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
    
40. Loading: ..... 5494368 bytes read
    
41. Entry at 0x00008000
    
42. Starting program at 0x00008000
    
43. console [ttyS0] enabled, bootconsole disabled
    
44. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
    
45. brd: module loaded
    
46. loop: module loaded
    
47. pflash: found no supported devices
    
48. bcmsflash: found no supported devices
    
49. Boot partition size = 524288(0x80000)
    
50. lookup_nflash_rootfs_offset: offset = 0x200000
    
51. nflash: squash filesystem with lzma found at block 33
    
52. Creating 4 MTD partitions on "nflash":
    
53. 0x000000000000-0x000000080000 : "boot"
    
54. 0x000000080000-0x000000200000 : "nvram"
    
55. 0x000000200000-0x000003c00000 : "linux"
    
56. 0x00000043642c-0x000003c00000 : "rootfs"
    
57. PPP generic driver version 2.4.2
    
58. PPP MPPE Compression module registered
    
59. NET: Registered protocol family 24
    
60. PPTP driver version 0.8.5
    
61. SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
    
62. CSLIP: code copyright 1989 Regents of the University of California.
    
63. sdhci: Secure Digital Host Controller Interface driver
    
64. sdhci: Copyright(c) Pierre Ossman
    
65. u32 classifier
    
66.     Actions configured
    
67. Netfilter messages via NETLINK v0.30.
    
68. nf_conntrack version 0.5.0 (3969 buckets, 15876 max)
    
69. ctnetlink v0.93: registering with nfnetlink.
    
70. nf_conntrack_rtsp v0.6.21 loading
    
71. IPv4 over IPv4 tunneling driver
    
72. nf_nat_rtsp v0.6.21 loading
    
73. ip_tables: (C) 2000-2006 Netfilter Core Team
    
74. TCP cubic registered
    
75. NET: Registered protocol family 10
    
76. ip6_tables: (C) 2000-2006 Netfilter Core Team
    
77. IPv6 over IPv4 tunneling driver
    
78. NET: Registered protocol family 17
    
79. Bridge firewalling registered
    
80. Ebtables v2.0 registered
    
81. L2TP core driver, V2.0
    
82. PPPoL2TP kernel driver, V2.0
    
83. L2TP IP encapsulation support (L2TPv3)
    
84. L2TP netlink interface
    
85. L2TP ethernet pseudowire support (L2TPv3)
    
86. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    
87. All bugs added by David S. Miller <davem@redhat.com>
    
88. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2                                                                                                                                                             012
    
89. NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit)
    
90. Spare area=64 eccbytes 56, ecc bytes located at:
    
91. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34                                                                                                                                                              35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
    
92. Available 7 bytes at (off,len):
    
93. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
    
94. Scanning device for bad blocks
    
95. Options: NO_AUTOINCR,NO_READRDY,BBT_SCAN2NDPAGE,
    
96. Creating 1 MTD partitions on "brcmnand":
    
97. 0x000003c00000-0x000008000000 : "brcmnand"
    
98. VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
    
99. devtmpfs: mounted
    
100. Freeing init memory: 232K
     
101. Failed to execute /sbin/preinit.  Attempting defaults...
     
102. ********************************************************************************                                                                                                                                                             *
     
103.               _        _  __    _    __ _____ __   __ _____
     
104.              | |      | ||  \  | |  / // ____]\ \ / // ____]TM
     
105.              | |      | ||   \ | | / /| (___   \ V /| (____
     
106.              | |      | || |\ \| |\ \  \____ \  \ /  \____ \
     
107.              | |_____ | || | \   | \ \  ____) | | |   ____) |
     
108.              |_______||_||_|  \__|  \_\[____ /  |_|  [_____/
     
109. 
     
110. (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
     
111. Booting honda (firmware version 1.1.40.160989)
     
112. ********************************************************************************                                                                                                                                                             *
     
113. [utopia][init] System Initialization
     
114. [utopia][init] Creating /proc
     
115. [utopia][init] Creating /sys
     
116. [utopia][init] Creating /dev
     
117. [utopia][init] Creating /tmp
     
118. [utopia][init] Allocating 40M for /tmp
     
119. [utopia][init] Prepairing /dev/pts
     
120. [utopia][init] Setting /tmp and /var permissions
     
121. [utopia][init] Starting udev..
     
122. bdutil board utility kernel module, version 1.3
     
123. bdutil board utility kernel module boardId (1)
     
124. bdutil board utility buttons kernel module, version 1.3
     
125. bdutil board utility LEDs kernel module, version 1.3
     
126. bdutil board utility usbhub kernel module, version 1.1
     
127. [utopia][init] Using persistent syscfg data from /var/config/syscfg
     
128. [utopia][init] Starting system logging
     
129. [utopia][init] Starting sysevent subsystem
     
130. [utopia][init] Setting any unset system values to default
     
131. [utopia][init] no persistence config file (/var/config/pstcfg) found
     
132. Please check switch mac address
     
133. [utopia][init] Late loading usb drivers
     
134. inserting ctf.ko
     
135. et interface not found
     
136. ifconfig: eth0: error fetching interface information: Device not found
     
137. Cannot find device "eth0"
     
138. vconfig: ioctl error for add: No such device
     
139. vconfig: ioctl error for set_ingress_map: No such device
     
140. vconfig: ioctl error for set_ingress_map: No such device
     
141. vconfig: ioctl error for set_ingress_map: No such device
     
142. vconfig: ioctl error for set_ingress_map: No such device
     
143. vconfig: ioctl error for set_ingress_map: No such device
     
144. vconfig: ioctl error for set_ingress_map: No such device
     
145. vconfig: ioctl error for set_ingress_map: No such device
     
146. vconfig: ioctl error for set_ingress_map: No such device
     
147. Cannot find device "vlan2"
     
148. Cannot find device "vlan2"
     
149. Cannot find device "vlan2"
     
150. Command line is not complete. Try option "help"
     
151. Cannot find device "eth0"
     
152. vconfig: ioctl error for add: No such device
     
153. vconfig: ioctl error for set_ingress_map: No such device
     
154. vconfig: ioctl error for set_ingress_map: No such device
     
155. vconfig: ioctl error for set_ingress_map: No such device
     
156. vconfig: ioctl error for set_ingress_map: No such device
     
157. vconfig: ioctl error for set_ingress_map: No such device
     
158. vconfig: ioctl error for set_ingress_map: No such device
     
159. vconfig: ioctl error for set_ingress_map: No such device
     
160. vconfig: ioctl error for set_ingress_map: No such device
     
161. Cannot find device "vlan1"
     
162. Cannot find device "vlan1"
     
163. Cannot find device "vlan1"
     
164. Command line is not complete. Try option "help"
     
165. checking for interactive script start up...
     
166. 0xb000000 0x1000000
     
167. Usage: syscfg [show | set [ns] name value | get [ns] name | unset [ns] name |
     
168.        setencrypt [ns] name value | getencrypt [ns] name |
     
169.        ismatch [ns] name value | commit | getdefault ]
     
170. Warning : No device serial number found in configuration database
     
171. TODO : Create real serial number in 01_init.sh
     
172. 0xc000000 0x1000000
     
173. 0xd000000 0x1000000
     
174. 0xe000000 0x1000000
     
175. 0xf000000 0x1000000
     
176. 0x10000000 0x1000000
     
177. 0x11000000 0x1000000
     
178. 0x12000000 0x1000000
     
179. 0x13000000 0x1000000
     
180. 0x14000000 0x1000000
     
181. 0x15000000 0x1000000
     
182. 0x16000000 0x1000000
     
183. 0x17000000 0x1000000
     
184. 0x18000000 0x1000000
     
185. Device "eth0" does not exist.
     
186. sh: 1: unknown operand
     
187. [utopia][init] Starting bdutil daemon
     
188. attempting to sync sysinfo.cgi auth credentials
     
189. BDUTIL daemon mode
     
190. Sat Jul 28 17:10:00 UTC 2012
     
191. et interface not found
     
192. et interface not found
     
193. 
     
194. Cannot find device "vlan1"
     
195. Cannot find device "vlan1"
     
196. (none) login: interface vlan1 does not exist!
     
197. et interface not found
     
198. et interface not found
     
199. 0x17010000 0x1000000
     
200. 0x18010000 0x1000000
     
201. Cannot find device "eth0"
     
202. Cannot find device "eth0"
     
203. vconfig: ioctl error for add: No such device
     
204. vconfig: ioctl error for set_ingress_map: No such device
     
205. vconfig: ioctl error for set_ingress_map: No such device
     
206. vconfig: ioctl error for set_ingress_map: No such device
     
207. vconfig: ioctl error for set_ingress_map: No such device
     
208. vconfig: ioctl error for set_ingress_map: No such device
     
209. vconfig: ioctl error for set_ingress_map: No such device
     
210. vconfig: ioctl error for set_ingress_map: No such device
     
211. vconfig: ioctl error for set_ingress_map: No such device
     
212. Cannot find device "vlan2"
     
213. Cannot find device "vlan2"
     
214. Cannot find device "vlan2"
     
215. Command line is not complete. Try option "help"
     
216. Cannot find device "vlan2"
     
217. [utopia] Not setting ppp_clamp_mtu
     
218. Cannot find device "vlan2"
     
219. configuring interfaces for IGMP filtering
     
220. Invalid interface specified
     
221. 
     
222. Invalid interface specified
     
223. 
     
224. Invalid interface specified
     
225. 
     
226. wifi, sysevent received: lan-started
     
227. wifi, service_start()
     
228. wifi_scheduler, sysevent received (Sat Jul 28 10:10:08 PDT 2012)
     
229. et interface not found
     
230. Lighttpd Model Base: EA6700
     
231. Generating Rainier lighttpd config
     
232. et interface not found
     
233. et interface not found
     
234. et interface not found
     
235. et interface not found
     
236. et interface not found
     
237. et interface not found
     
238. et interface not found
     
239. et interface not found
     
240. et interface not found
     
241. et interface not found
     
242. wifi, system_boot_init
     
243. et interface not found
     
244. et interface not found
     
245. et interface not found
     
246. et interface not found
     
247. et interface not found
     
248. et interface not found
     
249. Device is Broadcom Router
     
250. et interface not found
     
251. et interface not found
     
252. et interface not found
     
253. et interface not found
     
254. et interface not found
     
255. ifconfig: eth0: error fetching interface information: Device not found
     
256. ifconfig: eth1: error fetching interface information: Device not found
     
257. ifconfig: eth2: error fetching interface information: Device not found
     
258. Build temporary www configuration directory:
     
259. wl: wl driver adapter not found
     
260. wl: wl driver adapter not found
     
261. wl: wl driver adapter not found
     
262. wl: wl driver adapter not found
     
263. wl: wl driver adapter not found
     
264. TSLIIHauhEfGE
     
265. wl: wl driver adapter not found
     
266. wl: wl driver adapter not found
     
267. wl: wl driver adapter not found
     
268. wl: wl driver adapter not found
     
269. wl: wl driver adapter not found
     
270. wl: wl driver adapter not found
     
271. wl: wl driver adapter not found
     
272. et interface not found
     
273. et interface not found
     
274. et interface not found
     
275. et interface not found
     
276. wl: wl driver adapter not found
     
277. wl: wl driver adapter not found
     
278. wl: wl driver adapter not found
     
279. wl: wl driver adapter not found
     
280. wl: wl driver adapter not found
     
281. wl: wl driver adapter not found
     
282. wl: wl driver adapter not found
     
283. wl: wl driver adapter not found
     
284. wl: wl driver adapter not found
     
285. wl: wl driver adapter not found
     
286. wl: wl driver adapter not found
     
287. wl: wl driver adapter not found
     
288. wl: wl driver adapter not found
     
289. wl: wl driver adapter not found
     
290. wl: wl driver adapter not found
     
291. wl: wl driver adapter not found
     
292. wl: wl driver adapter not found
     
293. wl: wl driver adapter not found
     
294. wl: wl driver adapter not found
     
295. et interface not found
     
296. et interface not found
     
297. et interface not found
     
298. et interface not found
     
299. wl: wl driver adapter not found
     
300. wl: wl driver adapter not found
     
301. /usr/bin/lua: /etc/init.d/service_devidentd/deviceupdate.lua:54: invalid UUID string
     
302. stack traceback:
     
303.         [C]: in function 'uuid'
     
304.         /etc/init.d/service_devidentd/deviceupdate.lua:54: in main chunk
     
305.         [C]: ?
     
306. wl: wl driver adapter not found
     
307. wl: wl driver adapter not found
     
308. wl: wl driver adapter not found
     
309. wl: wl driver adapter not found
     
310. /etc/init.d/service_wifi/service_wifi.sh: line 21: Error missing rate information: : not found
     
311. expr: syntax error
     
312. wl: wl driver adapter not found
     
313. incorrect mode for rate: %rate
     
314. wl: wl driver adapter not found
     
315. Duplicate configuration request
     
316. 
     
317. wl: wl driver adapter not found
     
318. wl: wl driver adapter not found
     
319. wl: wl driver adapter not found
     
320. wl: wl driver adapter not found
     
321. wl: wl driver adapter not found
     
322. wl: wl driver adapter not found
     
323. wl: wl driver adapter not found
     
324. wl: wl driver adapter not found
     
325. wl: wl driver adapter not found
     
326. wl: wl driver adapter not found
     
327. wl: wl driver adapter not found
     
328. wl: wl driver adapter not found
     
329. wl: wl driver adapter not found
     
330. wl: wl driver adapter not found
     
331. wl: wl driver adapter not found
     
332. wl: wl driver adapter not found
     
333. wl: wl driver adapter not found
     
334. wl: wl driver adapter not found
     
335. wl: wl driver adapter not found
     
336. wl: wl driver adapter not found
     
337. wl: wl driver adapter not found
     
338. wl: wl driver adapter not found
     
339. wl: wl driver adapter not found
     
340. wl: wl driver adapter not found
     
341. wl: wl driver adapter not found
     
342. wl: wl driver adapter not found
     
343. wl: wl driver adapter not found
     
344. wl: wl driver adapter not found
     
345. /etc/init.d/service_wifi/service_wifi.sh: line 21: Error missing rate information: : not found
     
346. expr: syntax error
     
347. wl: wl driver adapter not found
     
348. incorrect mode for rate: %rate
     
349. et interface not found
     
350. et interface not found
     
351. et interface not found
     
352. et interface not found
     
353. et interface not found
     
354. et interface not found
     
355. et interface not found
     
356. et interface not found
     
357. et interface not found
     
358. et interface not found
     
359. et interface not found
     
360. et interface not found
     
361. et interface not found
     
362. et interface not found
     
363. et interface not found
     
364. et interface not found
     
365. et interface not found
     
366. et interface not found
     
367. et interface not found
     
368. et interface not found
     
369. et interface not found
     
370. et interface not found
     
371. wifi, platform_virtual_onetime_setting()
     
372. wl: wl driver adapter not found
     
373. wl: wl driver adapter not found
     
374. wl: wl driver adapter not found
     
375. wl: wl driver adapter not found
     
376. [utopia] Not setting ppp_clamp_mtu on dslite protocol
     
377. wl: wl driver adapter not found
     
378. wl: wl driver adapter not found
     
379. wl: wl driver adapter not found
     
380. wl: wl driver adapter not found
     
381. wl: wl driver adapter not found
     
382. wl: wl driver adapter not found
     
383. wl: wl driver adapter not found
     
384. wl: wl driver adapter not found
     
385. wl: wl driver adapter not found
     
386. wl: wl driver adapter not found
     
387. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
388. wl: wl driver adapter not found
     
389. wl: wl driver adapter not found
     
390. wl: wl driver adapter not found
     
391. Device "eth1" does not exist.
     
392. wl: wl driver adapter not found
     
393. wl: wl driver adapter not found
     
394. wl: wl driver adapter not found
     
395. wl: wl driver adapter not found
     
396. wl: wl driver adapter not found
     
397. wl: wl driver adapter not found
     
398. wl: wl driver adapter not found
     
399. wl: wl driver adapter not found
     
400. wl: wl driver adapter not found
     
401. wl: wl driver adapter not found
     
402. wl: wl driver adapter not found
     
403. wl: wl driver adapter not found
     
404. wl: wl driver adapter not found
     
405. Registering Service myrouter._http._tcp.local port 80
     
406. wl: wl driver adapter not found
     
407. wl: wl driver adapter not found
     
408. wl: wl driver adapter not found
     
409. Device "eth2" does not exist.
     
410. Got a reply for myrouter._http._tcp.local.: Name now registered and active
     
411. Command line parsing error. Quitting...
     
412. Restarting nfqrecv service...
     
413. ifconfig: SIOCGIFFLAGS: No such device
     
414. wl: wl driver adapter not found
     
415. wl: wl driver adapter not found
     
416. wl: wl driver adapter not found
     
417. wl: wl driver adapter not found
     
418. wl: wl driver adapter not found
     
419. wl: wl driver adapter not found
     
420. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
421. wifi, user vap eth1 is up
     
422. ifconfig: SIOCGIFFLAGS: No such device
     
423. wl: wl driver adapter not found
     
424. wl: wl driver adapter not found
     
425. wl: wl driver adapter not found
     
426. wifi, user vap eth2 is up
     
427. wifi, guest_enabled is set to 0, do not enable 2.4GHz guest
     
428. Failed to modify password entry for user guest
     
429. wifi, guest_enabled is set to 0, do not enable 5GHz guest
     
430. wl: wl driver adapter not found
     
431. wl: wl driver adapter not found
     
432. wl: wl driver adapter not found
     
433. wl: wl driver adapter not found
     
434. et interface not found
     
435. et interface not found
     
436. et interface not found
     
437. et interface not found
     
438. et interface not found
     
439. et interface not found
     
440. et interface not found
     
441. et interface not found
     
442. et interface not found
     
443. et interface not found
     
444. et interface not found
     
445. et interface not found
     
446. et interface not found
     
447. et interface not found
     
448. et interface not found
     
449. et interface not found
     
450. et interface not found
     
451. et interface not found
     
452. et interface not found
     
453. et interface not found
     
454. et interface not found
     
455. eth1: cmd=14: No such device
     
456. eth1: WLC_SET_VAR(pref_chanspec): No such device
     
457. et interface not found
     
458. eth1: WLC_GET_VAR(obss_coex): No such device
     
459. eth1: WLC_SET_VAR(chanim_sample_period): No such device
     
460. eth1: WLC_SET_VAR(noise_metric): No such device
     
461. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
462. eth1: WLC_GET_VAR(scb_assoced): No such device
     
463. eth1: WLC_GET_VAR(scb_assoced): No such device
     
464. eth1: WLC_GET_VAR(scb_assoced): No such device
     
465. wl: wl driver adapter not found
     
466. wl: wl driver adapter not found
     
467. wl: wl driver adapter not found
     
468. wl: wl driver adapter not found
     
469. eth1: WLC_GET_VAR(scb_assoced): No such device
     
470. eth1: WLC_GET_VAR(chanspec): No such device
     
471. eth1: WLC_GET_VAR(scb_assoced): No such device
     
472. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
473. eth1: WLC_GET_VAR(chanim_stats): No such device
     
474. eth1: WLC_GET_VAR(scb_assoced): No such device
     
475. eth1: WLC_GET_VAR(chanim_stats): No such device
     
476. eth1: WLC_GET_VAR(scb_assoced): No such device
     
477. eth1: WLC_GET_VAR(chanim_stats): No such device
     
478. eth1: WLC_GET_VAR(scb_assoced): No such device
     
479. eth1: WLC_GET_VAR(chanim_stats): No such device
     
480. eth1: WLC_GET_VAR(scb_assoced): No such device
     
481. eth1: WLC_GET_VAR(chanspec): No such device
     
482. eth1: WLC_GET_VAR(chanim_stats): No such device
     
483. eth1: WLC_GET_VAR(scb_assoced): No such device
     
484. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
485. eth1: WLC_GET_VAR(chanim_stats): No such device
     
486. eth1: WLC_GET_VAR(scb_assoced): No such device
     
487. eth1: WLC_GET_VAR(chanim_stats): No such device
     
488. eth1: WLC_GET_VAR(scb_assoced): No such device
     
489. eth1: WLC_GET_VAR(chanim_stats): No such device
     
490. eth1: WLC_GET_VAR(scb_assoced): No such device
     
491. eth1: WLC_GET_VAR(chanim_stats): No such device
     
492. eth1: WLC_GET_VAR(scb_assoced): No such device
     
493. eth1: WLC_GET_VAR(chanspec): No such device
     
494. eth1: WLC_GET_VAR(chanim_stats): No such device
     
495. eth1: WLC_GET_VAR(scb_assoced): No such device
     
496. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
497. eth1: WLC_GET_VAR(chanim_stats): No such device
     
498. eth1: WLC_GET_VAR(scb_assoced): No such device
     
499. eth1: WLC_GET_VAR(chanim_stats): No such device
     
500. eth1: WLC_GET_VAR(scb_assoced): No such device
     
501. eth1: WLC_GET_VAR(chanim_stats): No such device
     
502. eth1: WLC_GET_VAR(scb_assoced): No such device
     
503. eth1: WLC_GET_VAR(chanim_stats): No such device
     
504. eth1: WLC_GET_VAR(scb_assoced): No such device
     
505. eth1: WLC_GET_VAR(chanspec): No such device
     
506. eth1: WLC_GET_VAR(chanim_stats): No such device
     
507. eth1: WLC_GET_VAR(scb_assoced): No such device
     
508. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
509. eth1: WLC_GET_VAR(chanim_stats): No such device
     
510. eth1: WLC_GET_VAR(scb_assoced): No such device
     
511. eth1: WLC_GET_VAR(chanim_stats): No such device
     
512. eth1: WLC_GET_VAR(scb_assoced): No such device
     
513. eth1: WLC_GET_VAR(chanim_stats): No such device
     
514. eth1: WLC_GET_VAR(scb_assoced): No such device
     
515. eth1: WLC_GET_VAR(chanim_stats): No such device
     
516. eth1: WLC_GET_VAR(scb_assoced): No such device
     
517. eth1: WLC_GET_VAR(chanspec): No such device
     
518. eth1: WLC_GET_VAR(chanim_stats): No such device
     
519. eth1: WLC_GET_VAR(scb_assoced): No such device
     
520. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
521. eth1: WLC_GET_VAR(chanim_stats): No such device
     
522. eth1: WLC_GET_VAR(scb_assoced): No such device
     
523. eth1: WLC_GET_VAR(chanim_stats): No such device
     
524. eth1: WLC_GET_VAR(scb_assoced): No such device
     
525. Failed to modify password entry for user guest
     
526. eth1: WLC_GET_VAR(chanim_stats): No such device
     
527. eth1: WLC_GET_VAR(scb_assoced): No such device
     
528. Failed to modify password entry for user guest
     
529. Starting smbd ...
     
530. eth1: WLC_GET_VAR(chanim_stats): No such device
     
531. eth1: WLC_GET_VAR(scb_assoced): No such device
     
532. eth1: WLC_GET_VAR(chanspec): No such device
     
533. eth1: WLC_GET_VAR(chanim_stats): No such device
     
534. eth1: WLC_GET_VAR(scb_assoced): No such device
     
535. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
536. eth1: WLC_GET_VAR(chanim_stats): No such device
     
537. eth1: WLC_GET_VAR(scb_assoced): No such device
     
538. eth1: WLC_GET_VAR(chanim_stats): No such device
     
539. eth1: WLC_GET_VAR(scb_assoced): No such device
     
540. eth1: WLC_GET_VAR(chanim_stats): No such device
     
541. eth1: WLC_GET_VAR(scb_assoced): No such device
     
542. eth1: WLC_GET_VAR(chanim_stats): No such device
     
543. eth1: WLC_GET_VAR(scb_assoced): No such device
     
544. eth1: WLC_GET_VAR(chanspec): No such device
     
545. eth1: WLC_GET_VAR(chanim_stats): No such device
     
546. eth1: WLC_GET_VAR(scb_assoced): No such device
     
547. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
548. eth1: WLC_GET_VAR(chanim_stats): No such device
     
549. eth1: WLC_GET_VAR(scb_assoced): No such device
     
550. eth1: WLC_GET_VAR(chanim_stats): No such device
     
551. eth1: WLC_GET_VAR(scb_assoced): No such device
     
552. eth1: WLC_GET_VAR(chanim_stats): No such device
     
553. eth1: WLC_GET_VAR(scb_assoced): No such device
     
554. eth1: WLC_GET_VAR(chanim_stats): No such device
     
555. eth1: WLC_GET_VAR(scb_assoced): No such device
     
556. eth1: WLC_GET_VAR(chanspec): No such device
     
557. eth1: WLC_GET_VAR(chanim_stats): No such device
     
558. eth1: WLC_GET_VAR(scb_assoced): No such device
     
559. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
560. eth1: WLC_GET_VAR(chanim_stats): No such device
     
561. eth1: WLC_GET_VAR(scb_assoced): No such device
     
562. eth1: WLC_GET_VAR(chanim_stats): No such device
     
563. eth1: WLC_GET_VAR(scb_assoced): No such device
     
564. eth1: WLC_GET_VAR(chanim_stats): No such device
     
565. eth1: WLC_GET_VAR(scb_assoced): No such device
     
566. eth1: WLC_GET_VAR(chanim_stats): No such device
     
567. eth1: WLC_GET_VAR(scb_assoced): No such device
     
568. eth1: WLC_GET_VAR(chanspec): No such device
     
569. eth1: WLC_GET_VAR(chanim_stats): No such device
     
570. eth1: WLC_GET_VAR(scb_assoced): No such device
     
571. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
572. eth1: WLC_GET_VAR(chanim_stats): No such device
     
573. eth1: WLC_GET_VAR(scb_assoced): No such device
     
574. eth1: WLC_GET_VAR(chanim_stats): No such device
     
575. eth1: WLC_GET_VAR(scb_assoced): No such device
     
576. eth1: WLC_GET_VAR(chanim_stats): No such device
     
577. eth1: WLC_GET_VAR(scb_assoced): No such device
     
578. eth1: WLC_GET_VAR(chanim_stats): No such device
     
579. eth1: WLC_GET_VAR(scb_assoced): No such device
     
580. eth1: WLC_GET_VAR(chanspec): No such device
     
581. eth1: WLC_GET_VAR(chanim_stats): No such device
     
582. eth1: WLC_GET_VAR(scb_assoced): No such device
     
583. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
584. eth1: WLC_GET_VAR(chanim_stats): No such device
     
585. eth1: WLC_GET_VAR(scb_assoced): No such device
     
586. eth1: WLC_GET_VAR(chanim_stats): No such device
     
587. eth1: WLC_GET_VAR(scb_assoced): No such device
     
588. eth1: WLC_GET_VAR(chanim_stats): No such device
     
589. eth1: WLC_GET_VAR(scb_assoced): No such device
     
590. eth1: WLC_GET_VAR(chanim_stats): No such device
     
591. eth1: WLC_GET_VAR(scb_assoced): No such device
     
592. linkstate: Cannot read port0 status (ioctl (SIOCGETCROBORD) failed: No such device)
     
593. eth1: WLC_GET_VAR(chanspec): No such device
     
594. eth1: WLC_GET_VAR(chanim_stats): No such device
     
595. eth1: WLC_GET_VAR(scb_assoced): No such device
     
596. eth1: WLC_GET_VAR(chanim_stats): No such device
     
597. eth1: WLC_GET_VAR(scb_assoced): No such device
     
598. eth1: WLC_GET_VAR(chanim_stats): No such device
     
599. eth1: WLC_GET_VAR(scb_assoced): No such device
     
600. eth1: WLC_GET_VAR(chanim_stats): No such device
     
601. eth1: WLC_GET_VAR(scb_assoced): No such device
     
602. eth1: WLC_GET_VAR(chanim_stats): No such device
     
603. eth1: WLC_GET_VAR(scb_assoced): No such device
     

复制代码

azx

支持支持

hqhm

我的win7  X64上ttl没反应是否已经砖？tx rx gnd没错就是不出来，波特率115200和9600都试过不行！是否和系统有关？X64。win7的不能用CRT吗？

tyraevil

hqhm 发表于 2016-3-7 19:00
我的win7  X64上ttl没反应是否已经砖？tx rx gnd没错就是不出来，波特率115200和9600都试过不行！是否和系 ...

你的问题解决了吗？我跟你情况一样一样的，接线确认没错。自己的 TTL 如果用来连其他的设备都可以正常通讯，唯独连接 EA 6500v2 一片空白。。。

hqhm

tyraevil 发表于 2016-7-9 22:40
你的问题解决了吗？我跟你情况一样一样的，接线确认没错。自己的 TTL 如果用来连其他的设备都可以正常通 ...

我的确定挂掉了。没救了！

lawman

ink 发表于 2014-11-30 17:02
还有这事？我倒真的没有发现竟然需要加焊、短接……………………

兄弟，知道EA4500的TTL怎么定义的么？手上有一个挂掉了，想试试看能不能修好。

mysy

美版港版有啥差别？？？

我美国买的

flyfisher

6500砖了，先标记，线回来试试