找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 9083|回复: 9

极贰的困扰求助---问题完美解决

[复制链接]
发表于 2015-5-31 15:11 | 显示全部楼层 |阅读模式
本帖最后由 king88504535 于 2015-6-7 13:29 编辑

极贰,官方root后未备份key,从潘多拉刷回了官方,结果root丢失,key也丢失,UBOOT又被锁,只能在官方固件之间来回刷,无法root,无法换uboot,无法刷第三方。不知道有没高手可以救我。

------------------------------------------------------------------------------------------------------------------------------------------------
自己焊了ttl,但是始终无法进入命令行界面,所以ttl下的方式也行不通。剩下就是拆flash上编程器,但是本人菜鸟动手技术差,也行不通。
最后报着试试看的心态联系客服,得知只要自负来回运费就可以发回去返厂维修。很开心得叫了快递立马送走,过了几天就发回来了,拆开一看是给我换机了,包括天线和电源。登录云平台,售后保修也恢复了。真是完美的售后,直接路转粉。




-------------------------------------------------------------------------------------------------------------------------------------------------
写得不是很通顺,只是为了分享经验,大家随便看看
发表于 2015-5-31 17:03 | 显示全部楼层
拆F刷UBOOT是肯定的了 至于KEY我也不知道怎么办了
回复 支持 反对

使用道具 举报

发表于 2015-5-31 18:53 | 显示全部楼层
key是无解了的,除非你寄回原厂成本“维修”,,上编程器的话,,可以刷入breed,然后各种high,何必留恋官方固件?ps:如果版本在9006的话,,貌似还能上ttl

点评

自己没有合适的工具,所以淘宝上找了家代刷编程器的,但是要我提供能用的编程器固件。论坛上找不到,不知大神手上有吗  详情 回复 发表于 2015-5-31 23:35
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-5-31 23:35 | 显示全部楼层
zjhgrsy 发表于 2015-5-31 18:53
key是无解了的,除非你寄回原厂成本“维修”,,上编程器的话,,可以刷入breed,然后各种high,何必留恋官 ...

自己没有合适的工具,所以淘宝上找了家代刷编程器的,但是要我提供能用的编程器固件。论坛上找不到,不知大神手上有吗

点评

我是用1s的,自然不会有极2的编程器固件,,这种带key的固件,应该没人愿意共享  详情 回复 发表于 2015-6-1 16:17
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-6-1 13:18 | 显示全部楼层
连TTL开机后是这样的

U-Boot 1.1 (蚢r 19 2015 - 10:152Board: Ra靑nk APSoC燚RA  128 MB
enable ephy clock...done. rf r彗牪範= 5
SSC disabled.
spi device id: ef 40 18 0 0 (40180000)
find 骒狍韬 w25q128
*** Warning牠犫徜 CRC, using default environment

============================================
AS擅牱恫0_MP (Port5<->None)
DRAM component: 1024 Mbits DDR, width 16
D伊蜖怩s: 16 bit
Flash component: SPI Flash
============================================
  0
## Booting image犪魻忏0000 ...
   Image Name:   HC5761
   Image Type:   MIPS Linux 隋蝾屐 Image (lzma compressed)
   Data Size:    1012900 Bytes = 989.2犽聤崰  Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Imag鍫?疇纤

Starting kernel ...

[    0.000000] Linux version 3.3.8 (build@DEV-9-1-243) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Mon Jun 9 19:19:46 CST 2014
[    0.000000]
[    0.000000]  The CPU feqenuce set to 580 MHz
[    0.000000]
[    0.000000]  MIPS CPU sleep mode enabled.
[    0.000000]  PCIE: bypass PCIe DLL.
[    0.000000]  PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
[    0.000000]  disable all power about PCIe
[    0.000000] CPU revision is: 00019650 (MIPS 24KEc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00008000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00008000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=HC5761 console=ttyS1,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=0007bbae
[    0.000000] Readback ErrCtl register=0007bbae
[    0.000000] Memory: 126776k/131072k available (2229k kernel code, 4296k reserved, 519k data, 172k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] MTK/Ralink System Tick Counter init... cd:8029fae0, m:214748, s:32
[    0.000000] console [ttyS1] enabled
[    0.010000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is Hiwifi Wireless HC5761 Board
[    0.090000] gpiochip_add: registered GPIOs 0 to 23 on device: MT7620-GPIO0
[    0.090000] gpiochip_add: registered GPIOs 24 to 39 on device: MT7620-GPIO1
[    0.100000] gpiochip_add: registered GPIOs 40 to 71 on device: MT7620-GPIO2
[    0.100000] gpiochip_add: registered GPIOs 72 to 72 on device: MT7620-GPIO3
[    1.310000] bio: create slab <bio-0> at 0
[    1.320000] PCI host bridge to bus 0000:00
[    1.320000] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    1.330000] pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff]
[    1.330000] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
[    1.340000] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    1.340000] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
[    1.350000] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    1.350000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
[    1.360000] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
[    1.360000] BAR0 at slot 0 = 0
[    1.370000] bus=0x0, slot = 0x0
[    1.370000] Found pcie device(bus=0x1, slot = 0x0)
[    1.370000] Found pcie device(bus=0x1, slot = 0x0)
[    1.380000] Switching to clocksource Ralink external timer
[    1.390000] NET: Registered protocol family 2
[    1.390000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.390000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.400000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.400000] TCP: Hash tables configured (established 4096 bind 4096)
[    1.410000] TCP reno registered
[    1.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.430000] NET: Registered protocol family 1
[    1.430000] RT3xxx EHCI/OHCI init.
[    1.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.460000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.470000] msgmni has been set to 247
[    1.470000] io scheduler noop registered
[    1.480000] io scheduler deadline registered (default)
[    1.480000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.490000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
[    1.500000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
[    1.520000] brd: module loaded
[    1.520000] deice id : ef 40 18 0 0 (40180000)
[    1.530000] chip info: w25q128(ef 40180000)
[    1.530000] mtd name = raspi, size = 0x01000000 (16M) erasesize = 0x00010000 (64K)
[    1.540000] raspi: squash filesystem found at block 21
[    1.570000] bdinfo: fac txt empty, use default.
[    1.570000] Creating 9 MTD partitions on "raspi":
[    1.580000] 0x000000000000-0x000000030000 : "u-boot"
[    1.580000] mtdchar alloc 0x10000 memory success
[    1.590000] 0x000000030000-0x000000040000 : "hw_panic"
[    1.600000] 0x000000040000-0x000000050000 : "Factory"
[    1.600000] 0x000000050000-0x000000150000 : "kernel"
[    1.610000] 0x000000150000-0x000000fd0000 : "rootfs"
[    1.620000] mtd: partition "rootfs" set to be root filesystem
[    1.620000] mtd: partition "rootfs_data" created automatically, ofs=C00000, len=3D0000
[    1.630000] 0x000000c00000-0x000000fd0000 : "rootfs_data"
[    1.640000] 0x000000fd0000-0x000000fe0000 : "hwf_config"
[    1.640000] 0x000000fe0000-0x000000ff0000 : "bdinfo"
[    1.650000] 0x000000ff0000-0x000001000000 : "backup"
[    1.660000] 0x000000050000-0x000000fd0000 : "firmware"
[    1.670000] Stopped WatchDog Timer.
[    1.670000] Ralink APSoC Hardware Watchdog Timer
[    1.670000] TCP cubic registered
[    1.680000] NET: Registered protocol family 17
[    1.680000] 8021q: 802.1Q VLAN Support v1.8
[    1.690000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.700000] Freeing unused kernel memory: 172k freed
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
[    7.330000] JFFS2 notice: (465) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 20 of xref (0 dead, 10 orphan) found.
[    7.340000] ttyS1: 3 input overrun(s)
keypressed: 1
- regular preinit -
switching to jffs2
- init -

Please press Enter to activate this console. [    9.670000] Uniform Multi-Platform E-IDE driver
[    9.850000] ttyS1: 2 input overrun(s)
[    9.910000] NET: Registered protocol family 10
[   10.220000] SCSI subsystem initialized
[   10.400000] usbcore: registered new interface driver usbfs
[   10.400000] usbcore: registered new interface driver hub
[   10.420000] usbcore: registered new device driver usb
[   11.350000]
[   11.350000]
[   11.350000] === pAd = c03d9000, size = 860424 ===
[   11.350000]
[   11.360000] <-- RTMPAllocTxRxRingMemory, Status=0
[   11.360000] <-- RTMPAllocAdapterBlock, Status=0
[   11.370000] ttyS1: 7 input overrun(s)
[   12.120000]
[   12.120000]
[   12.120000] === pAd = c0781000, size = 942904 ===
[   12.120000]
[   12.130000] <-- RTMPAllocTxRxRingMemory, Status=0
[   12.140000] <-- RTMPAllocAdapterBlock, Status=0
[   12.140000] device_id =0x7650
[   12.150000] ==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[   12.160000] MACVersion = 0x76502000
[   12.300000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   13.130000] loop: module loaded
[   13.160000] ttyS1: 11 input overrun(s)
[   13.340000] PPP generic driver version 2.4.2
[   13.430000] PPP MPPE Compression module registered
[   13.450000] IPv6 over IPv4 tunneling driver
[   13.570000] exFAT: Core Version 1.2.4
[   13.600000] exFAT: FS Version 1.2.4
[   13.630000] GRE over IPv4 demultiplexor driver
[   13.730000] GRE over IPv4 tunneling driver
[   13.820000] ide-gd driver 1.18
[   14.100000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.380000] NET: Registered protocol family 24
[   14.510000] ttyS1: 11 input overrun(s)
[   14.620000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.650000] rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
[   14.660000] rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
[   14.700000] rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
[   14.720000] rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00
[   14.720000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   14.730000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.740000] usb usb1: Product: Ralink EHCI Host Controller
[   14.750000] usb usb1: Manufacturer: Linux 3.3.8 ehci_hcd
[   14.750000] usb usb1: SerialNumber: rt3xxx
[   14.760000] hub 1-0:1.0: USB hub found
[   14.760000] hub 1-0:1.0: 1 port detected
[   14.880000] nf_conntrack version 0.5.0 (1983 buckets, 7932 max)
[   15.330000] PPTP driver version 0.8.5
[   15.840000] xt_time: kernel timezone is -0000
[   15.840000] ttyS1: 16 input overrun(s)
[   16.680000] nf_conntrack_rtsp v0.6.21 loading
[   16.730000] nf_nat_rtsp v0.6.21 loading
[   16.890000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.990000] ttyS1: 4 input overrun(s)
[   17.480000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.510000] rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
[   17.520000] rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
[   17.530000] rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
[   17.590000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   17.600000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   17.610000] usb usb2: Product: RT3xxx OHCI Controller
[   17.610000] usb usb2: Manufacturer: Linux 3.3.8 ohci_hcd
[   17.620000] usb usb2: SerialNumber: rt3xxx-ohci
[   17.630000] hub 2-0:1.0: USB hub found
[   17.630000] hub 2-0:1.0: 1 port detected
[   17.770000] Initializing USB Mass Storage driver...
[   17.780000] usbcore: registered new interface driver usb-storage
[   17.790000] USB Mass Storage support registered.
[   17.930000] fuse init (API version 7.18)
[   25.330000] device eth2.1 entered promiscuous mode
[   25.340000] device eth2 entered promiscuous mode
[   25.340000] ttyS1: 17 input overrun(s)
[   25.350000] br-lan: port 1(eth2.1) entered forwarding state
[   25.360000] br-lan: port 1(eth2.1) entered forwarding state
[   26.520000] device eth2.2 entered promiscuous mode
[   26.660000] ttyS1: 5 input overrun(s)
[   27.360000] br-lan: port 1(eth2.1) entered forwarding state
[   29.630000] RX DESC a721c000  size = 4096
[   29.660000] ttyS1: 3 input overrun(s)
[   30.020000] 1. Phy Mode = 9
[   30.020000] 2. Phy Mode = 9
[   30.030000] eeFlashId: 0x7620
[   30.030000] 3. Phy Mode = 9
[   30.030000] AntCfgInit: primary/secondary ant 0/1
[   30.030000] Current Temperature from BBP_R49=0xfffffff5
[   30.050000] RT6352_TssiTableAdjust: upper_bound = 0x7F decimal: 127
[   30.050000] RT6352_TssiTableAdjust: lower_bound = 0xFFFFFF80 decimal: -128
[   30.060000] *** RT6352_TssiTableAdjust: G Tssi[-7 .. +7] = -128 -128 -128 -128 -35 -24 -14
[   30.060000]  - 0 - 13 23 30 32 127 127 127, offset=-10, tuning=1
[   30.080000] RT6352_TssiTableAdjust: G Tssi[-7 .. +7] = -128 -128 -128 -128 -45 -34 -24 - -10 - 3 13 20 22 117 117 117, offset=-10, tuning=1
[   30.090000] mp_temperature=0xfffffffe, step = +0
[   30.090000] E2PROM: G Tssi[-7 .. +7] = -128 -128 -128 -128 -45 -34 -24 - -10 - 3 13 20 22 117 117 117, offset=-10, tuning=1
[   30.490000] bAutoTxAgcG = 1
[   30.500000] MCS Set = ff ff 00 00 01
[   30.580000] Main bssid = 00:ba:be:00:00:00
[   30.580000] <==== rt28xx_init, Status=0
[   30.590000] 0x1300 = 00064300
[   30.760000] device ra0 entered promiscuous mode
[   30.760000] br-lan: port 2(ra0) entered forwarding state
[   30.770000] br-lan: port 2(ra0) entered forwarding state
[   30.780000] ttyS1: 19 input overrun(s)
[   31.490000] load fw spent 20ms
[   31.490000] RX DESC a6b42000 size = 2048
[   31.500000] RX1 DESC a6b43000 size = 2048
[   31.530000] cfg_mode=14
[   31.530000] cfg_mode=14
[   31.540000] wmode_band_equal(): Band Not Equal!
[   31.780000] 1. Phy Mode = 49
[   31.780000] 2. Phy Mode = 49
[   31.790000] ext_pa_current_setting = 1
[   31.790000] MT76x0_TssiTableAdjust: upper_bound = 0x7F decimal: 127
[   31.800000] MT76x0_TssiTableAdjust: lower_bound = 0xFFFFFF80 decimal: -128
[   31.800000] *** MT76x0_TssiTableAdjust: A Tssi[-7 .. +7] = -128 -128 -128 -128 -16 -10 -4 * 0 * 6 13 19 127 127 127 127, offset=-8, tuning=1
[   31.820000] MT76x0_TssiTableAdjust: A Tssi[-7 .. +7] = -128 -128 -128 -128 -24 -18 -12 * -8 * -2 5 11 119 119 119 119, offset=-8, tuning=1
[   31.830000] mp_temperature=0xfffffff9, step = +0
[   31.830000] MT76x0_TssiTableAdjust: upper_bound = 0x7F decimal: 127
[   31.840000] MT76x0_TssiTableAdjust: lower_bound = 0xFFFFFF80 decimal: -128
[   31.850000] *** MT76x0_TssiTableAdjust: A Tssi[-7 .. +7] = -128 -128 -128 -128 -18 -13 -5 * -8 * 4 13 20 127 127 127 127, offset=-8, tuning=1
[   31.860000] MT76x0_TssiTableAdjust: A Tssi[-7 .. +7] = -128 -128 -128 -128 -26 -21 -13 * -8 * -4 5 12 119 119 119 119, offset=-8, tuning=1
[   31.870000] mp_temperature=0xfffffff9, step = +0
[   31.880000] 3. Phy Mode = 49
[   31.880000] AntCfgInit: primary/secondary ant 0/1
[   31.890000] ChipStructAssign(): RALINK6590 hook !
[   31.890000] bAutoTxAgcG = 1
[   31.890000] MCS Set = ff 00 00 00 01
[   31.900000] MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=149, HT-CentCh=151, VHT-CentCh=155
[   31.910000] APStartUp(): AP Set CentralFreq at 155(Prim=149, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2)
[   31.920000] Main bssid = 00:ba:be:00:00:00
[   31.930000] <==== rt28xx_init, Status=0
[   31.930000] MT76x0_Calibration - Channel = 155, bPowerOn = 1, bSaveCal = 1
[   31.940000] FullCalibration - Channel = 42, param = 0x301, bSave = 1, CalibrationMode = 255
[   32.330000] FullCalibration - Channel = 136, param = 0x401, bSave = 1, CalibrationMode = 255
[   32.720000] FullCalibration - Channel = 155, param = 0x501, bSave = 1, CalibrationMode = 255
[   33.110000] FullCalibration - Channel = 155, param = 0x901, bSave = 0, CalibrationMode = 255
[   33.150000] br-lan: port 2(ra0) entered forwarding state
[   33.150000] 0x1300 = 00064300
[   33.160000] RTMPDrvOpen(1):Check if PDMA is idle!
[   33.160000] RTMPDrvOpen(2):Check if PDMA is idle!
[   33.210000] ttyS1: 7 input overrun(s)
[   33.270000] device rai0 entered promiscuous mode
[   33.270000] br-lan: port 3(rai0) entered forwarding state
[   33.280000] br-lan: port 3(rai0) entered forwarding state
[   33.470000] Simple address matching list for Netfilter - HiWiFi
[   35.280000] br-lan: port 3(rai0) entered forwarding state
[   35.280000] ttyS1: 39 input overrun(s)
[   37.040000] ASSOC - MBSS(0), receive ASSOC request from 08:d8:33:7f:d0:20
[   37.040000] ttyS1: 2 input overrun(s)
[   40.020000] ASSOC - MBSS(0), receive ASSOC request from 54:e4:3a:14:d5:ef
[   40.030000] ttyS1: 2 input overrun(s)
[   44.250000] device eth2.2 left promiscuous mode
[   44.260000] ttyS1: 2 input overrun(s)
[   44.290000] ethernet: port0 linkdown
[   44.920000] device eth2.2 entered promiscuous mode
Jun  9 19:18:29 crond[2228]: crond: crond (busybox 1.19.4) started, log level 5
[   49.310000] [NOTICE] <HWF-Kproxy> (hwf_kproxy_init:1340) kproxy hook prioriy -101
[   49.320000] [NOTICE] <HWF-Kproxy> (hwf_kproxy_init:1347) Module is inserted
[   49.410000] ttyS1: 4 input overrun(s)
[   49.540000] [NOTICE] <HWF-SQOS> (hwf_sqos_lan_init:120) lan: 192.168.199.1, lan1: 0.0.0.0
[   49.550000] [NOTICE] <HWF-SQOS> (hwf_sqos_init:186) Module is inserted
[   49.920000] [NOTICE] <HWF-SQOS> (hwf_sqos_qdisc_init:343) tc direction  1
[   49.930000] [NOTICE] <HWF-SQOS> (hwf_sqos_qdisc_init:344) tc queue len max 4000
[   49.950000] [NOTICE] <HWF-SQOS> (hwf_sqos_qdisc_init:343) tc direction  0
[   49.960000] [NOTICE] <HWF-SQOS> (hwf_sqos_qdisc_init:344) tc queue len max 4000
Jun  9 19:18:35 crond[2479]: crond: crond (busybox 1.19.4) started, log level 5
[   61.930000] device eth2.2 left promiscuous mode
[   61.930000] ttyS1: 23 input overrun(s)
[   61.960000] ethernet: port0 linkdown
[   62.310000] device eth2.2 entered promiscuous mode
[   68.960000] ASSOC - MBSS(0), receive ASSOC request from dc:37:14:2a:8b:48
[   68.970000] ttyS1: 4 input overrun(s)
[   78.880000] device eth2.2 left promiscuous mode
[   78.900000] ttyS1: 2 input overrun(s)
[   78.940000] ethernet: port0 linkdown
[   79.130000] device eth2.2 entered promiscuous mode
Jun  9 19:19:01 crond[2479]: crond: USER root pid 2782 cmd /usr/sbin/logrotate /etc/logrotate.conf
Jun  9 19:19:01 crond[2479]: crond: USER root pid 2783 cmd lua /etc/app/traffic_his_2d_script.lua
[   95.770000] device eth2.2 left promiscuous mode
[   95.790000] ttyS1: 4 input overrun(s)
[   95.800000] ethernet: port0 linkdown
[   96.210000] device eth2.2 entered promiscuous mode
[  112.660000] device eth2.2 left promiscuous mode
[  112.680000] ttyS1: 4 input overrun(s)
[  112.680000] ethernet: port0 linkdown
[  112.890000] device eth2.2 entered promiscuous mode
回复 支持 反对

使用道具 举报

发表于 2015-6-1 15:04 | 显示全部楼层
3楼是个办法
我现在就是breed
各种high
幸亏我备份了key还有原版的编程器固件
回复 支持 反对

使用道具 举报

发表于 2015-6-1 16:17 | 显示全部楼层
king88504535 发表于 2015-5-31 23:35
自己没有合适的工具,所以淘宝上找了家代刷编程器的,但是要我提供能用的编程器固件。论坛上找不到,不知 ...

我是用1s的,自然不会有极2的编程器固件,,这种带key的固件,应该没人愿意共享
回复 支持 反对

使用道具 举报

发表于 2015-6-1 16:39 | 显示全部楼层
用极路由论坛里的降级工具到9007或者9006,然后接ttl开机,开机完毕就回车,这个时候是有root权限的,这个时候用vi编辑/etc/rc.local,加两句,/etc/init.d/dropbear enable
/etc/init.d/dropbear start,然后回车空一行保存,然后就有root权限了。要不直接在ttl下用tftp传breed进去,刷breed就行
回复 支持 反对

使用道具 举报

发表于 2015-6-2 17:35 来自手机 | 显示全部楼层
淘宝上买的1s刷好不死uboot的,问卖家要固件也爱理不理
回复 支持 反对

使用道具 举报

发表于 2015-6-2 17:36 来自手机 | 显示全部楼层
头疼
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-6-15 14:31

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com

快速回复 返回顶部 返回列表