发几张华为光纤猫HG8245 EPON设备内部图

shb1***

sof***

首拆么？mark备用

lj***

配置不错   贴上散热片就完美了

jian***

现在家里就是这个光猫

5614***

8245的flash是哪个？能提取固件吗？

SAS***

这个看起来像hli的主控是啥牌子,咋没太听说过?

horn***

Hisilicon SD5113 (ARM11) 530 MHz, 16-bit DDR2-667, Huawei EchoLife HG8245 GPON Terminal.

    ARMv6 architecture.
    L1 Data cache = 16 KB. 32 B/line, 4-WAY.
    L1 Instruction cache = 16 KB. 32 B/line, 4-WAY.
    L1 TLB size = 10 items (Micro-TLB), fully associative.
    L2 TLB size = 64 items (Main TLB), 2-WAY.
    Single-issue out-of-order-completion CPU.
    Dynamic prediction: BTAC (Branch Target Addresses Cache): 128-entry, direct-mapped, 2-bit saturating prediction history scheme. BTAC hits enable branch prediction with zero cycle delay.
    Static branch prediction: The processor predicts that all forward conditional branches are not taken and all backward branches are taken.
    Return stack: 3-entry circular buffer used for the prediction of procedure calls and procedure returns. Only unconditional procedure returns are predicted.
    Hit-under-miss: When an instruction requests data from a cache, if the data is not there, ARM11 treats this as a non-blocking operation. The cache is instructed to get the missing data, then the pipeline execution can continue as long as the next instructions are not dependent on the missing data. Even if the next instruction is another data load, the ARM11 microarchitecture permits this operation if the data is in the cache (i.e. a hit-under-miss). Only if three successive data misses are encountered, will the pipeline stall.
    The execution of an ALU or MAC instruction will not be delayed by a waiting LS instruction.

lee32***

思考