|
我的HG320在TTL下刷独舞的64K CFE出问题了,就是那个独舞用E1500改的CFE!救高手帮助,好像可以进入miniweb,但试了在miniweb下上传官方固件或独舞的E1500 tomato固件都不行!!
Decompressing.............doneStart to blink diag led ...
CFE version 5.60.120.19 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 01/16/11 02:17:41 CST (work@seal3.fedora10)
Copyright (C) 2000-2008 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 00FEFFFF (16449508)
nvram #03 00FF0000 -> 00FFFFFF (65536)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 00FEFFFF (16449536)
nvram #02 00FF0000 -> 00FFFFFF (65536)
BCM47XX_GMAC_ID
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.19
CPU type 0x19749: 500MHz
Total memory: 65536 KBytes
CFE mem: 0x80700000 - 0x807B0790 (722832)
Data: 0x80745AA0 - 0x80749AD0 (16432)
BSS: 0x80749AD0 - 0x8074A790 (3264)
Heap: 0x8074A790 - 0x807AE790 (409600)
Stack: 0x807AE790 - 0x807B0790 (8192)
Text: 0x80700000 - 0x80745A94 (285332)
Boot version: v5.3.3
The boot is CFE
No mac find, use default mac
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=0 ###
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 00-0A-C2-EE-8E-E3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Err invalid Boot magic 1007859712 810697800
Invalid boot block on disk
AP code error! boot_from(0)
CMD: [flash -ctheader -https : flash1.trx]
Reading :: http_fileop_read = 59046000
HTTP server listening...(type 'quit' to quit)
get upgrade.asp
Decompressing.............done
Start to blink diag led ...
CFE version 5.60.120.19 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 01/16/11 02:17:41 CST (work@seal3.fedora10)
Copyright (C) 2000-2008 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 00FEFFFF (16449508)
nvram #03 00FF0000 -> 00FFFFFF (65536)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 00FEFFFF (16449536)
nvram #02 00FF0000 -> 00FFFFFF (65536)
BCM47XX_GMAC_ID
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.19
CPU type 0x19749: 500MHz
Total memory: 65536 KBytes
CFE mem: 0x80700000 - 0x807B0790 (722832)
Data: 0x80745AA0 - 0x80749AD0 (16432)
BSS: 0x80749AD0 - 0x8074A790 (3264)
Heap: 0x8074A790 - 0x807AE790 (409600)
Stack: 0x807AE790 - 0x807B0790 (8192)
Text: 0x80700000 - 0x80745A94 (285332)
Boot version: v5.3.3
The boot is CFE
No mac find, use default mac
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=0 ###
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 00-0A-C2-EE-8E-E3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Err invalid Boot magic 1007859712 810697800
Invalid boot block on disk
AP code error! boot_from(0)
CMD: [flash -ctheader -https : flash1.trx]
Reading :: http_fileop_read = 59046000
HTTP server listening...(type 'quit' to quit)
get upgrade.asp
post upgrade.cgi
content length == 7861703, 2d 2d 2d 2d 2d 2d 2d 2d
222content length == 7860303, rxlen == 1400, jj == 1400
E, 1, 5, 0, 00, 00, 00, 00
Last : 0d, 0a, 2d, 2d, 2d, 2d, 2d, 2d
len == 148
filename = tomato-E1500USB-NVRAM64K-1.28.20130605MIPSR2-RT-N5x-Arctic-Lite.bin
receive data count == 7861248
code pattern : E150
firmware version : 4.20.06
http finished its job, now it is flash driver's turn!bang, bang....
Develop..... | http_fileop_close
Develop..... | http_fileop_uninit
Done. 7861248 bytes read, fname=flash1.trx
CODE Pattern is correct! (E150)
Invalid header length. This is not a TRX image.
The file transferred is not a valid firmware image.
CFE> Decompressing.............done
Start to blink diag led ...
CFE version 5.60.120.19 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 01/16/11 02:17:41 CST (work@seal3.fedora10)
Copyright (C) 2000-2008 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 00FEFFFF (16449508)
nvram #03 00FF0000 -> 00FFFFFF (65536)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 00FEFFFF (16449536)
nvram #02 00FF0000 -> 00FFFFFF (65536)
BCM47XX_GMAC_ID
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.19
CPU type 0x19749: 500MHz
Total memory: 65536 KBytes
CFE mem: 0x80700000 - 0x807B0790 (722832)
Data: 0x80745AA0 - 0x80749AD0 (16432)
BSS: 0x80749AD0 - 0x8074A790 (3264)
Heap: 0x8074A790 - 0x807AE790 (409600)
Stack: 0x807AE790 - 0x807B0790 (8192)
Text: 0x80700000 - 0x80745A94 (285332)
Boot version: v5.3.3
The boot is CFE
No mac find, use default mac
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=0 ###
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 00-0A-C2-EE-8E-E3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Err invalid Boot magic 1007859712 810697800
Invalid boot block on disk
AP code error! boot_from(0)
CMD: [flash -ctheader -https : flash1.trx]
Reading :: http_fileop_read = 59046000
HTTP server listening...(type 'quit' to quit)
get upgrade.asp
Decompressing.............done
Start to blink diag led ...
CFE version 5.60.120.19 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 01/16/11 02:17:41 CST (work@seal3.fedora10)
Copyright (C) 2000-2008 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 00FEFFFF (16449508)
nvram #03 00FF0000 -> 00FFFFFF (65536)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 00FEFFFF (16449536)
nvram #02 00FF0000 -> 00FFFFFF (65536)
BCM47XX_GMAC_ID
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.19
CPU type 0x19749: 500MHz
Total memory: 65536 KBytes
CFE mem: 0x80700000 - 0x807B0790 (722832)
Data: 0x80745AA0 - 0x80749AD0 (16432)
BSS: 0x80749AD0 - 0x8074A790 (3264)
Heap: 0x8074A790 - 0x807AE790 (409600)
Stack: 0x807AE790 - 0x807B0790 (8192)
Text: 0x80700000 - 0x80745A94 (285332)
Boot version: v5.3.3
The boot is CFE
No mac find, use default mac
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=0 ###
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0: hwaddr 00-0A-C2-EE-8E-E3, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Err invalid Boot magic 1007859712 810697800
Invalid boot block on disk
AP code error! boot_from(0)
CMD: [flash -ctheader -https : flash1.trx]
Reading :: http_fileop_read = 59046000
HTTP server listening...(type 'quit' to quit)
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|