|
我最近把Flash由 2M =》 4M, CFE 随便用网上下载的,
但是用tftp升级FW 时总是报出错,下面是串口出来的调试信息,
那位朋友有4M Flash 的启动信息,可否发来参考一下?
谢谢!
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
LDR version 2.03.08 for identification.
Build Date: Wed Jul 13 19:16:25 CST 2005 (denny@dny_fc3.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29008: 200MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80300000 - 0x8039B320 (635680)
Initialized Data: 0x803310B0 - 0x80333740 (9872)
BSS Area: 0x80333740 - 0x80335320 (7136)
Local Heap: 0x80335320 - 0x80399320 (409600)
Stack Area: 0x80399320 - 0x8039B320 (8192)
Text (code) segment: 0x80300000 - 0x803310B0 (200880)
Boot area (physical): 0x0039C000 - 0x003DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-11-50-9D-B0-97, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
I/O error
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Done. 3776512 bytes read
[flash1.trx] : Programming...Failed.: Unknown error
boardcase upgrade status to client: upgrade failure
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029008
Linux version 2.4.35 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #1824 Wed Jan 2 02:15:57 CET 2008
。。。
以下省略,能正常启动路由器,可以在web 界面上设置参数。 |
|