本帖最后由 13062678135 于 2016-11-25 17:26 编辑
具体修改如下配置如下:
config interface ‘loopback’
option ifname ‘lo’
option proto ‘static’
option ipaddr ‘127.0.0.1’
option netmask ‘255.0.0.0’ config globals ‘globals’
option ula_prefix ‘fde4:9375:1dbc::/48’
config interface ‘lan’
option force_link ‘1’
option type ‘bridge’
option proto ‘static’
option ipaddr ‘192.168.1.1’
option netmask ‘255.255.255.0’
option ip6assign ’60’
option _orig_ifname ‘eth0 wlan0’
option _orig_bridge ‘true’
option ifname ‘eth0.1’ config interface ‘wan’
option proto ‘dhcp’
option _orig_ifname ‘eth1’
option _orig_bridge ‘false’
option ifname ‘eth0.2’
config switch
option name ‘switch0’
option reset ‘1’
option enable_vlan ‘1’
config switch_vlan
option device ‘switch0’
option vlan ‘1’
option vid ‘1’
option ports ‘0t 3 4’
config switch_vlan
option device ‘switch0’
option vlan ‘2’
option vid ‘2’
option ports ‘0t 1’ 修改红字部分就行。保存后重启。原机上的WAN口可以正常使用了。 然后进SSH, opkg update opkg install luci luci-i18n-base-zh-cn
请不要胡乱输入以及粘贴、复制等方式灌水
请尊重作者、并共同维护网站的正常阅读,否则账户将会被限制发帖、回帖,站内短信以及阅读权限等都会受到影响,谢谢。
具体限制方式:https://www.right.com.cn/forum/thread-8307840-1-1.html
|