RT-AC53机型-固件

safe***

#############################################################
# MTK platform, linux-2.6.36.x
# Valild option for BOOT_FLASH_TYPE are shown below:
#        NOR, SPI, NAND
# Valild option for DRAM are shown below:
#        8M, 16M, 32M, 64M, 128M, 256M
# Valid option for SECOND_IF are shown below:
#         NONE, MT7610
#         RT3092, RT5392, RT5592, RT3593, RT3572, RT5572 (TBD)
##############################################################

export RT-AC53 := IPV6SUPP=y HTTPS=y MIPS32=r2 RALINK=y MT7620=y
EBTABLES=y PARENTAL2=y ACCEL_p p t pD=y AUTODICT=y SHP=y RTAC53=y
SFP=y ODMPID=y LED_ALL=y NEW_RGDM=y RA_SKU=y RA_SKU_IN_DRV=y
DEBUGFS=y LAN50=y REBOOT_SCHEDULE=y OPENvirtual**=y virtual**C=y REPEATER=y
TCODE=y MDNS=y FINDASUS=y BTN_WPS_ALLLED=y SSH=y NEWSSID_REV2=y
ATCOVER=y GETREALIP=y REDIRECT_DNAME=y BUILD_NAME="RT-AC53" \
        BOOT_FLASH_TYPE=SPI SPI_FAST_CLOCK=y \
        DRAM=64M \
        SECOND_IF=MT7610E EDCCA=y RALINK_DFS=y \
        EXTRA_KERNEL_CONFIGS="MT7620_BAUDRATE=115200 RT2880_DRAM_64M=y
        EXTERNAL_PA_EXTERNAL_LNA=y RT2860V2_AP_RTMP_INTERNAL_TX_ALC=n
        UBOOT_CMDLINE=y SWITCH_CHIP_RTL8367RB=y SWITCH_CTRLIF_MDIO=y
        RAETH_HAS_PORT5=y P5_RGMII_TO_MAC_MODE=y MODEL_RTAC53=y"


**********************************************************************************
**********************************************************************************

Sometimes I get an error while it's recompiling iptables. I usually just re-run "make rt-n66u" and it works - possibly a missing dependency in the build environment that is resolved when you recompile a second time. A few notes:

• Do not do a "make distclean", or else I believe you will have to reconfigure everything (meaning the kernel, the firmware features, etc...)
• If you suspect you messed up something (like your config files), it's often simpler to untar again from the source tarball, and start all over.
  

**************Besides my whines, I am stubborn indeed. I found the solution! This patch fixes it:
        Code:
        --- a/asuswrt-merlin/release/src/router/shared.Makefile 2016-06-06 21:21:57.078144745 +0300+++ b/asuswrt-merlin/release/src/router/shared/Makefile 2016-06-06 21:21:05.000000000 +0300@@ -195,14 +195,14 @@ clean:        rm -f *.o *.so *.a .*.depend *.prep sysdeps/*.o sysdeps/broadcom/*.o sysdeps/ralink/*.o sysdeps/qtn/*.o+%.o: prebuild/%.o+       @echo " [shared] cp $@"+       @cp -f $< $@+ %.o: %.c .%.depend        @echo " [shared] CC $@"        @$(CC) $(CFLAGS) -o $@ -c $<-%.o: prebuild/%.o-       @echo " [shared] cp $@"-       @cp -f $< $@- .depend: $(OBJS:%.o=%.c)        @$(CC) $(CFLAGS) -M $^ > .depend
For some reason, just putting the prebuild part just above the depend part makes it work as expected. ARGH those ASUS engineers!                                       

疯狂***

稳坐2楼     大神加油我们都等着华硕呢

safe***

疯狂的屠夫 发表于 2017-6-18 18:43
稳坐2楼     大神加油我们都等着华硕呢

机器运行中 编译固件半小时一会就过去了

疯狂***

稳定吗    有木有已知BUG

疯狂***

方便发一个给我吗   我帮你试试   

拉***

支持下,支持下,
期待K2的AC1200HP AC53完美固件

safe***

疯狂的屠夫 发表于 2017-6-18 18:49
方便发一个给我吗   我帮你试试

HAI ZAI BIANYI DANG ZHONG : )

疯狂***

额  好吧   期待你的编译    我要做第二个吃螃蟹的

5614***

稳定吗？字数补丁

凡先***

下载地址啊啊.....

wyun***

咋编译呢，楼主拍一个编译照片俺看看，实在小白不懂啊

wai***

期待你的编译   

cix***

躺地下室等着

g2***

这个不错，等你的固件

mufe***

配置一模一样。。。。。。而且还k2这么便宜，很划算。。。